Cochecito básico ANEX IQ
IQ TODO EN UNO
Plegado do cadro
MARCO IQ
Desdobramento do cadro
Montaxe das rodas dianteiras
Bloqueo de rodas xiratorias dianteiras
Montaxe das rodas traseiras
Freos
Absorción de choque
Regulamento de manexo
Desconexión/conexión da cesta da compra
Asa de transporte
Axuste de ancho do cadro
Desembalaxe do capazo
Plegado do capazo
Desdobramento do capazo
Anexo ao marco
Ventilación
Axuste do capó do capazo
Accesorio para funda de capazo
Limpeza do capazo
Anexo ao marco
UNIDADE DE ASIENTO IQ
Plegado do cadro con asento
Axuste do capó da unidade de asento
Axuste do respaldo da unidade de asento
Ventilación do respaldo da unidade de asento
Axuste do repousapés
Barreira de seguridade da unidade de asento
Cinto de seguridade con fibela
Axuste dos cintos de seguridade
Limpeza da unidade de asento
Montaxe de bens blandos
Axuste do capó do buggy
Ventilación do respaldo do buggy
Axuste do respaldo do buggy 
Axuste do repousapés
Cinto de seguridade con fibela
Axuste dos cintos de seguridade
Plegado do cadro con buggy
Funda impermeable para capazo/unidade de asento
Consulta os manuais máis recentes no noso websitio: anexbaby.com
A información está suxeita a cambios sen previo aviso. Anex non será responsable dos erros técnicos ou omisións contidos neste manual. O produto adquirido pode diferir do produto descrito neste manual.
AVALEX PTE. LTD.,
8 Eu Tong Sen Street #17-88, Central
Torre de oficinas 2, Singapur, 059818
+65 62215096
office@anexbaby.com
Documentos/Recursos
 | Cochecito básico IQ |
Referencias
- Manual de usuariomanual.tools
Dear Anex Team,
We are experiencing an issue with our Anex IQ stroller and would appreciate your assistance.
We have these height adapters that were previously attached to the frame, and we used them with the bassinet without any problems. After removing the bassinet, we installed the seat unit (stroller seat) without the adapters.
However, the height adapters are now stuck in the seat unit, and we are unable to remove them. We have tried pulling them out, but they do not come off.
Could you please advise how to safely remove these adapters? If possible, we would appreciate it if you could send us instructions or a guide.
We have attached photos for your reference.
Thank you in advance for your help.
Un saúdo cordial,
Yuliya Tolkishevskaya
We are experiencing an issue with our Anex IQ stroller and would appreciate your assistance.
We have these height adapters that were previously attached to the frame, and we used them with the bassinet without any problems. After removing the bassinet, we installed the seat unit (stroller seat) without the adapters.
However, the height adapters are now stuck in the seat unit, and we are unable to remove them. We have tried pulling them out, but they do not come off.
Could you please advise how to safely remove these adapters? If possible, we would appreciate it if you could send us instructions or a guide.
We have attached photos for your reference.
Thank you in advance for your help.
Un saúdo cordial,
Yuliya Tolkishevskaya
How do I remove the height adapters from the Anex IQ seat unit if they are stuck?
Removing height adapters from the Anex IQ seat unit typically requires engaging the release mechanism located on the adapters themselves or the seat unit's attachment points. If they are stuck, please try the following steps:
Atención: Do not use excessive force or tools like pliers, as this may damage the plastic locking tabs. If the adapters remain stuck, it is recommended to contact Anex customer support directly at office@anexbaby.com or visit an authorized service center, as there may be a mechanical obstruction or a need for professional lubrication of the locking pins.
Read the full Q&A page