Intermatic Digital 7-Day Programmable Wall Switch Timer SS7C User Manual

Introdución

The Intermatic SS7C Digital 7-Day Programmable Wall Switch Timer is designed to control lighting and heavy-duty loads such as fans and appliances. This timer offers precise control with up to six ON/OFF settings per day, totaling 42 settings per week. It features a digital clock, battery backup, and various programming options to suit your schedule.

Información de seguridade

AVISO: Risk of electric shock. Installation requires working with high voltage wiring. Always turn off power at the circuit breaker or fuse box before installation or servicing. If you are unsure about any part of these instructions, consult a qualified electrician. Do not exceed the electrical ratings of the device.

• Asegúrese de desconectar a alimentación antes da instalación.
• Siga todos os códigos eléctricos locais e nacionais.
• Este dispositivo é só para uso en interiores.

Contido do paquete

Comprobe que todos os compoñentes estean presentes antes de comezar a instalación:

• Intermatic SS7C Digital Wall Switch Timer Unit
• Parafusos de montaxe
• Nuts de arame
• Manual de instrucións (este documento)

Configuración e instalación

Ferramentas necesarias: Screwdriver, Wire Strippers, Electrical Tape.

1. Apagar a enerxía: Locate the circuit breaker or fuse that controls the power to the switch you are replacing. Turn it OFF. Verify power is off using a voltagprobador.
2. Eliminar o interruptor existente: Carefully remove the wall plate and unscrew the existing switch from the wall box. Disconnect the wires from the old switch. Note the wiring configuration (e.g., line, load, ground).
3. Wire the SS7C Timer: Connect the wires from the wall box to the SS7C timer using the provided wire nuts. Refer to the wiring diagram below for typical connections. Ensure all connections are secure.
   

   Imaxe: Fronte view of the Intermatic SS7C Digital Wall Switch Timer. This image shows the digital display and control buttons, which are essential for programming and operation.

   • Cable de liña: Connect to the timer's LINE terminal.
   • Cable de carga: Connect to the timer's LOAD terminal.
   • Fío de terra: Connect to the timer's GROUND terminal.
   • Cable neutro (se corresponde): Some installations may require a neutral wire. Consult your local electrical codes.
4. Montar o temporizador: Gently push the wired timer into the wall box. Secure it with the mounting screws. Attach the wall plate.
5. Restaurar enerxía: Turn the power back ON at the circuit breaker or fuse box. The timer display should illuminate.

Operación e Programación

The SS7C timer allows for flexible programming with up to 6 ON/OFF settings per day.

1. Axuste da hora e do día actuais

1. Preme o RELOXO botón. A pantalla da hora parpadeará.
2. Usa o HORA e MINUTO botóns para axustar a hora actual.
3. Preme o DÍA botón para configurar o día actual da semana.
4. Preme RELOXO again to save and exit, or wait a few seconds for it to save automatically.

2. Programming ON/OFF Events

The timer supports up to 6 ON/OFF programs per day, for a total of 42 per week.

1. Preme o PROG button. The display will show "1 ON".
2. Use HORA, MINUTO, e DÍA buttons to set the desired ON time and day(s) for Program 1. You can select specific days (e.g., M, Tu, W, Th, F, Sa, Su), weekdays (M-F), weekends (Sa-Su), or all 7 days.
3. Preme PROG de novo. A pantalla mostrará "1 OFF".
4. Set the desired OFF time and day(s) for Program 1 using the HORA, MINUTO, e DÍA botóns.
5. Repita os pasos 1-4 para programas adicionais (de 2 ON/OFF a 6 ON/OFF).
6. After setting all desired programs, press RELOXO para volver ao funcionamento normal.

3. Anulación manual

To manually turn the connected device ON or OFF outside of programmed times, press the ON/OFF button. This will temporarily override the current program until the next scheduled ON or OFF event.

4. Random Setting Feature

The random setting feature can be activated to vary ON/OFF times slightly, creating a lived-in appearance when you are away. Consult the full manual for specific activation steps for the random feature.

Mantemento

The Intermatic SS7C timer is designed for low maintenance. The internal battery backup maintains programming for up to three years, even during power failures.

• Substitución da batería: If the display becomes dim or programming is lost frequently during power outages, the internal battery may need replacement. This typically requires professional servicing or careful adherence to specific instructions not detailed here.
• Limpeza: Clean the timer's surface with a soft, damp pano. Non use produtos de limpeza ou disolventes abrasivos.

Resolución de problemas

Especificacións

• Marca: Intermatic
• Número de modelo: SS7C
• Peso do artigo: 0.35 libras
• Número de configuracións: 7-day programmable, up to 6 ON/OFF settings per day (42 per week)
• Tamaño da pantalla: 1.5 polgadas
• Cor: Branco
• Fabricante: INTERMATIC INC
• UPC: 078275056732
• ASIN: B0000BYDA2

Garantía e Soporte

This Intermatic SS7C Digital 7-Day Programmable Wall Switch Timer comes with a Garantía limitada do fabricante de 1 anos desde a data de compra. Esta garantía cobre defectos de materiais e fabricación en condicións de uso normal.

For warranty claims, technical assistance, or further support, please contact Intermatic customer service. Keep your proof of purchase for warranty validation.

For the most up-to-date support information, please visit the official Intermatic websitio web ou consulte os datos de contacto que se inclúen na embalaxe do produto.