1. Produto rematadoview
The Mighty Mule Single Button Gate Opener Remote (FM135) is designed to provide convenient access to your Mighty Mule Automatic Gate Opener system. This remote serves as an excellent replacement or an additional unit for users needing to operate a single gate opener.
As características principais inclúen:
- Funcionamento dun só botón: Designed for straightforward control of one gate opener.
- Easy DIY Programming: Simple setup process to synchronize with your existing Mighty Mule Automatic Gate system.
- Uso versátil: Can be used as a primary remote or as an additional unit for multiple users or vehicles.
- Visor Clip Included: For convenient placement in your vehicle.
2. Contido do paquete
- 1 Mighty Mule Single Button Transmitter (FM135)
- 1 Visor Clip
- Manual de instrucións
3. Información de seguridade
- Manteña o mando a distancia fóra do alcance dos nenos.
- Non accione o abre-porta a non ser que estea cheo view e libre de obstáculos.
- Ensure no persons or objects are in the path of the gate before activation.
- Replace batteries only with the specified type to avoid damage or malfunction.
4. Instalación da batería
The Mighty Mule FM135 remote requires one AA battery (not included) for operation. Follow these steps to install or replace the battery:
- Localiza a tapa do compartimento das pilas na parte traseira do mando a distancia.
- Using a small screwdriver or coin, carefully open the battery compartment.
- Insira unha pila AA, asegurándose de que os terminais positivo (+) e negativo (-) estean aliñados correctamente coas marcas do interior do compartimento.
- Coloque a tapa do compartimento da batería e fíxaa.
5. Instrucións de programación
To program your Mighty Mule Single Button Remote (FM135) to your gate opener, you will need to match the dip switch settings on the remote to those on your gate opener's control board or an existing programmed remote. Refer to your gate opener's main instruction manual for specific access to the control board and its dip switches.
Nota importante: The dip switch sequence on the remote must precisely match that of the gate opener or other transmitters for the remote to send the correct signal.
- Open the remote's casing to access the internal dip switches.
- Locate the dip switches on your Mighty Mule gate opener's control board or on an existing, working remote.
- Carefully adjust the dip switches on your new FM135 remote to exactly match the ON/OFF positions of the dip switches on your gate opener's control board or existing remote.
- Once the dip switches are matched, close the remote's casing.
- Test the remote by pressing the button while within range of your gate opener.
For additional control options, Mighty Mule also offers 2-button (FM134) and 3-button (RB743) remotes. These can be programmed to operate multiple gate openers or even a garage door (requires Universal Receiver RB709U-NB for garage doors).
6. Uso do mando a distancia
Once programmed, operating your Mighty Mule Single Button Remote is simple:
- Ensure you are within the operational range of your Mighty Mule gate opener.
- Press the single button on the remote to activate the gate opener. The gate will open or close depending on its current state.
7. Mantemento
To ensure optimal performance and longevity of your remote:
- Substitución da batería: Replace the AA battery when the remote's indicator light dims or fails to illuminate upon button press, or if the remote's range decreases significantly. Refer to Section 4 for battery installation instructions.
- Limpeza: Limpa o mando a distancia cun pano suave e seco. Evita o uso de produtos químicos agresivos ou produtos de limpeza abrasivos.
- Almacenamento: Garde o mando a distancia nun lugar seco, lonxe de temperaturas extremas e da luz solar directa.
8 Solución de problemas
- Remote not activating the gate:
- Check the battery. Replace if necessary (refer to Section 4).
- Verify that the dip switch settings on the remote exactly match those on your gate opener's control board or an existing working remote (refer to Section 5).
- Ensure you are within the operational range of the gate opener.
- O indicador luminoso non se acende:
- The battery may be dead or incorrectly installed. Replace or re-install the battery.
9. Especificacións
| Fabricante | Mule poderoso |
| Número de peza | FM135 |
| Peso do elemento | 2.4 onzas |
| Dimensións do produto | 4 x 2 x 6.75 polgadas |
| Fonte de enerxía | Funciona con pilas |
| Voltage | 12 voltios |
| Tipo de batería | 1 AA battery required (Alkaline) |
10. Imaxes do produto
11. Vídeos oficiais de produtos
Quick Look At the MIGHTY MULE SINGLE BUTTON GATE REMOTE
Este vídeo ofrece unha rápida explicaciónview of the Mighty Mule Single Button Gate Remote, demonstrating its basic functionality and design. It highlights the simplicity of the remote for gate operation.
I had to buy one for every car! They are so to set up
This video shares a user's experience with the Mighty Mule remotes, emphasizing their ease of setup and the convenience of having multiple remotes for different vehicles.
My honest review after connecting these mighty mule clickers
A user provides a review after connecting Mighty Mule remotes, discussing the programming process and overall satisfaction with the product's performance.
3 button or 1 button remote control for Mighty Mule!
This video compares the single-button remote with a 3-button remote, explaining the benefits and use cases for each, helping users choose the right remote for their needs.
12. Información da garantía
The Mighty Mule Single Button Gate Opener Remote (FM135) comes with a Limited 12 Month Manufacturer's Warranty desde a data de compra. Esta garantía cobre defectos de materiais e fabricación en condicións de uso normal. Conserve o comprobante de compra para reclamacións de garantía.
13. Atención ao cliente
For further assistance, technical support, or warranty inquiries, please contact Mighty Mule customer service. Refer to the contact information provided in your gate opener's main manual or visit the official Mighty Mule websitio.
