Viper 479V Responder Remote Instruction Manual

1. Produto rematadoview

The Viper 479V Responder Remote is designed as an additional or replacement remote for compatible Viper security and remote start systems. It features up to 1/2 mile range and a premium SST LCD display for clear communication with your vehicle's system.

Image: Viper 479V Responder Remote. This image displays the front of the remote, highlighting its LCD screen and four control buttons.

Características principais:

• Comunicación bidireccional: Provides visual and audible confirmation when commands are sent successfully.
• Rango estendido: Operates with up to 1/2 mile range.
• Pantalla LCD: Premium SST LCD display for clear vehicle monitoring with priority icons.
• Four-Button Control: Allows for remote locking, unlocking, and starting of your vehicle.

2. Compatibilidade do sistema

This Viper 479V Responder Remote is compatible with the following Viper security and remote start systems:

• Viper 591XV
• Viper 690XV
• Viper 790XV
• Viper 791XV
• Víbora 542V
• Víbora 434V
• Víbora 554V
• Víbora 564V

Please verify your existing system's model number to ensure compatibility before programming.

3. Setup: Programming the Remote

To program your new Viper 479V Responder Remote to your vehicle's security system, follow these steps carefully. The programming process requires locating your vehicle's Valet/Programming button, which is typically installed in the vehicle itself, not on the remote.

1. Locate Valet/Programming Button: Identify the Valet/Programming button in your vehicle. Its location can vary, but it is often found under the dashboard, near the fuse box, or in the glove compartment.
2. Preparar o vehículo:
   • Open the driver's side door.
   • Insira a chave no contacto.
   • Turn the key to the "ON" position. Do not start the engine; the dash lights should illuminate.
3. Entrar no modo de programación:
   • For systems with remote start: Within 5 seconds of turning the key to "ON", press the Valet/Programming button once, then press and aguantar it. The car's siren will chirp once, indicating entry into programming mode.
   • For systems without remote start: Press the Valet/Programming button twice, then press and aguantar it. The car's siren will chirp once.
4. Program Remote: While continuing to hold the Valet/Programming button, press the "UNLOCK" button on your new Viper 479V remote once. You will hear another chirp from the vehicle's siren, and the remote may beep, confirming successful programming.
5. Saír do modo de programación: Release the Valet/Programming button. Turn the key to the "OFF" position and remove it from the ignition.
6. Proba a distancia: Test all functions of your new remote (lock, unlock, remote start if applicable) to ensure proper operation. If the remote does not function as expected, carefully repeat the programming steps from the beginning.

If you encounter difficulties, consult your vehicle's specific alarm system manual or contact a professional installer.

4. Uso do mando a distancia

The Viper 479V Responder Remote provides intuitive control over your vehicle's security and remote start features through its four-button layout and LCD display.

Funcións básicas:

• Bloqueo: Press the lock button to arm your vehicle's security system and lock the doors.
• Desbloquear: Press the unlock button to disarm your vehicle's security system and unlock the doors.
• Inicio remoto: Press the remote start button to remotely start your vehicle (if equipped and configured).
• Funcións auxiliares: Additional buttons may control auxiliary features depending on your system's installation.

The LCD display provides visual feedback on your vehicle's status, such as door lock status, alarm triggers, and remote start confirmation. Priority icons on the display offer a quick overview of important vehicle information.

5. Mantemento

Substitución da batería:

The Viper 479V remote requires dúas pilas AAA for operation. When the remote's display dims or its range decreases, it is time to replace the batteries.

1. Localiza a tapa do compartimento das pilas na parte traseira do mando a distancia.
2. Deslice ou solte a tapa con coidado para abrir o compartimento.
3. Retire as pilas AAA vellas.
4. Insira dúas pilas AAA novas, asegurándose de manter a polaridade correcta (+/-).
5. Coloque a tapa do compartimento da batería de forma segura.

Coidados e manexo:

• Evitar a exposición á auga: This remote is not waterproof. Exposure to water or high humidity can cause damage and lead to malfunction.
• Protexer das gotas: While durable, repeated drops or impacts can damage the internal electronics or the LCD screen.
• Limpar suavemente: Use a soft, dry cloth to clean the remote. Avoid harsh chemicals or abrasive materials.
• Extremos de temperatura: Avoid exposing the remote to extreme temperatures, such as direct sunlight in a closed vehicle for extended periods.

6 Solución de problemas

If you experience issues with your Viper 479V Responder Remote, consider the following troubleshooting steps:

• O control remoto non responde:
  • Comprobe e substitúa as pilas AAA.
  • Ensure you are within the operating range of the vehicle.
  • Verify that the remote is properly programmed to your vehicle's system (refer to Section 3).
• Alcance reducido:
  • Substitúe as pilas.
  • Ensure there are no significant obstructions between the remote and the vehicle.
• Problemas da pantalla LCD:
  • Se a pantalla está escura ou en branco, substitúa as pilas.
  • If the display is physically damaged, the remote may need replacement.
• Os botóns non funcionan:
  • Ensure the remote is clean and free of debris around the buttons.
  • If specific buttons consistently fail, the remote may be worn out and require replacement.
• Accidental Test Mode: Some remotes may have a small 'P' button on the back that can accidentally trigger a test mode. If this occurs, removing and reinserting the battery may reset the remote.

For persistent issues, it is recommended to consult a professional Viper installer or the product's support resources.

7. Especificacións

8. Información da garantía

The Viper 479V Responder Remote comes with a 1 ano de garantía do fabricanteEsta garantía cobre defectos de materiais e fabricación en condicións normais de uso. Conserve o comprobante de compra para reclamacións de garantía.

For specific details regarding warranty coverage and claims, refer to the documentation provided with your original Viper security system or contact Viper customer support.

9. Apoio

For further assistance, technical support, or inquiries not covered in this manual, please refer to the following resources:

• Oficial de Viper Websitio: Visit the official Viper websitio para actualizacións de produtos, preguntas frecuentes e documentación de soporte adicional.
• Professional Installer: Contact the authorized Viper dealer or installer who installed your security system for expert assistance.
• Atención ao cliente: Refer to your product packaging or the Viper websitio web para obter información de contacto do servizo de atención ao cliente.