Directed Electronics 474T 4-Button Transmitter User Manual

Introdución

This manual provides essential information for the Directed Electronics 474T 4-Button Transmitter. This device is a replacement remote designed for use with compatible Directed Electronics car security and remote start systems. It features a 4-button layout and utilizes stealth code technology for secure operation.

The 474T transmitter is compatible with specific Valet systems, including the Valet 562T, 536T, and 554R.

Figure 1: Directed Electronics 474T 4-Button Transmitter. This image displays the front of the remote, highlighting its four primary function buttons and the 'VALET' branding.

Configuración e programación

The Directed Electronics 474T transmitter requires programming to your vehicle's compatible security or remote start system. Programming instructions are typically specific to the main control unit (e.g., Valet 562T, 536T, 554R) and are not included with the transmitter itself. Please refer to the user manual of your specific Directed Electronics system for detailed programming steps.

General Programming Guidance:

• Locate the programming button or switch on your vehicle's alarm or remote start control module. This is often referred to as the 'Valet' button.
• Follow the sequence of ignition cycles and button presses as outlined in your system's manual to enter programming mode.
• Once in programming mode, press the desired button on the 474T transmitter to link it with the system.
• Exit programming mode according to your system's instructions.

The 474T transmitter requires one CR2 battery for operation. Ensure the battery is correctly installed before attempting to program or use the remote.

Instrucións de funcionamento

The 474T transmitter features four distinct buttons for controlling your vehicle's security system:

• Botón de bloqueo (🔒): Press this button to arm your vehicle's security system and lock the doors.
• Botón de desbloqueo (🔓): Press this button to disarm your vehicle's security system and unlock the doors.
• Botón con asterisco (*): This button typically controls auxiliary functions such as remote start, trunk release, or panic mode, depending on how your system is configured. Consult your system's manual for specific functionality.
• Botón AUX: This button is designated for additional auxiliary functions, which can be programmed to control various features of your vehicle's security or convenience system. Refer to your system's manual for details on its assigned function.

Ensure you are within range of your vehicle for the transmitter to function correctly. Signal range may vary based on environmental factors and vehicle obstructions.

Mantemento

To ensure optimal performance and longevity of your Directed Electronics 474T transmitter, follow these maintenance guidelines:

• Substitución da batería: The transmitter is powered by one CR2 battery. When the remote's range decreases or it becomes unresponsive, it is likely time to replace the battery. To replace, carefully open the remote casing, remove the old battery, and insert a new CR2 battery, observing correct polarity.
• Limpeza: Clean the exterior of the transmitter with a soft, dry cloth. Avoid using abrasive cleaners or solvents, which can damage the casing or buttons.
• Almacenamento: Store the transmitter in a dry place, away from extreme temperatures and direct sunlight. Avoid exposing it to water or excessive moisture.
• Manexo: Avoid dropping the transmitter or subjecting it to strong impacts, as this can damage internal components.

Resolución de problemas

If you experience issues with your Directed Electronics 474T transmitter, consider the following common solutions:

• O control remoto non responde:
  • Comprobe a batería. Substitúa a batería CR2 se está baixa ou esgotada.
  • Ensure you are within the effective operating range of your vehicle's system.
  • Verify that the remote is properly programmed to your system. If unsure, attempt to re-program the remote following your system's manual.
• Funcionamento intermitente:
  • This could indicate a weak battery. Replace the CR2 battery.
  • Environmental interference (e.g., strong radio signals, large metal structures) can affect performance. Try operating the remote in a different location.
• Botóns que non funcionan correctamente:
  • Asegúrate de que non haxa residuos aloxados debaixo dos botóns.
  • If a specific button is consistently unresponsive, the remote may require professional inspection or replacement.

For persistent issues, consult the comprehensive troubleshooting section of your vehicle's Directed Electronics system manual or contact Directed Electronics customer support.

Especificacións

Garantía e Soporte

For information regarding the product warranty, please refer to the documentation provided with your original Directed Electronics system or visit the official Directed Electronics websitio. Os termos e condicións da garantía poden variar.

For technical support, programming assistance, or service inquiries, please contact Directed Electronics customer support directly. Contact information can typically be found on the manufacturer's website or in your system's main user manual.

Información importante de seguridade

AVISO: Este produto contén produtos químicos coñecidos polo estado de California por causar cancro e defectos de nacemento ou outros danos á reprodución.