Introdución
Thank you for choosing the Progress Lighting P5604-31 1-Light Traditional Outdoor Wall Lantern. This fixture features a durable black powder-coated finish and a white opal glass diffuser, designed to enhance the exterior of your home. This manual provides essential information for safe installation, proper operation, and effective maintenance of your new lighting fixture.
Características principais:
- One Light Wall Lantern from the Utility Lantern collection
- Altura: 8.50 polgadas, Ancho: 6.00 polgadas
- Style: Traditional Outdoor
- Acabado: Negro
- Safety Rating: UL CUL and Safety Listing: Wet (suitable for outdoor use)
Información de seguridade
WARNING: RISK OF ELECTRIC SHOCK. Turn off power at the circuit breaker or fuse box before installation or servicing. Consult a qualified electrician if you are unsure about electrical wiring.
- Lea atentamente todas as instrucións antes de comezar a instalación.
- Todo o cableado debe estar de acordo cos códigos eléctricos nacionais e locais.
- Asegúrese de que o dispositivo estea correctamente conectado a terra.
- Non exceda a potencia máximatage especificado para a lámpada.
- Use lentes e luvas de seguridade durante a instalación.
Contido do paquete
Comprobe que todos os compoñentes estean presentes antes de comezar a instalación:
- 1 x Light Fixture (P5604-31)
- 1 x White Opal Glass Diffuser
- 1 x Installation Sheet
- Ferraxes de montaxe (parafusos, porcas para cables, etc.)
Nota: Bulb is not included. This fixture uses (1) 100-Watt maximum medium base (E26) incandescent bulb.
Figure 1: Line drawing of the P5604-31 fixture, showing its spherical glass and mounting base.
Guía de instalación
Follow these general steps for installing your outdoor wall lantern. Refer to the included installation sheet for detailed, model-specific instructions and diagrams.
1. Prepárese para a instalación
- Turn off power at the main circuit breaker or fuse box.
- Desembale con coidado o aparello e os compoñentes.
- Review the included installation sheet for specific wiring and mounting details.
2. Wall Lantern Placement and Sizing
Proper sizing and placement are crucial for both aesthetics and effective illumination. For entrances and garages, select fixtures that measure approximately 1/4 to 1/3 of the door's height. Mount them at eye level, about 5.5 to 6 feet from the ground to the center of the fixture.
Figura 2: Example of wall lantern sizing, recommending 1/4 of the door's height for the fixture.
Figura 3: Example of wall lantern placement for a garage, suggesting fixtures on either side of the doors.
3. Cableado e montaxe
- Fixe o soporte de montaxe á caixa de unión usando os parafusos proporcionados.
- Connect the fixture's wires to the house wires according to the color codes (usually black to black, white to white, and ground to ground). Secure connections with wire nuts.
- Meter coidadosamente todos os cables na caixa de conexión.
- Mount the fixture to the mounting bracket, securing it with the provided screws.
- Install the glass diffuser and bulb.
4. Video Guide: Sizing and Selection
For additional guidance on selecting and sizing outdoor lighting, watch the official Progress Lighting video below:
Video 1: Progress Lighting's guide on sizing and selecting outdoor lighting fixtures for various home exteriors.
Operación
Once installed, your Progress Lighting P5604-31 fixture operates like any standard outdoor light. Simply use your existing wall switch to turn the light on or off. Ensure the correct type and wattage of bulb (100-Watt maximum, medium base E26 incandescent) is installed for optimal performance and safety.
Mantemento
Limpeza
To maintain the appearance of your fixture, clean it regularly with a soft, damp pano. Non empregue produtos de limpeza abrasivos nin disolventes, xa que poden danar o acabado ou o vidro. Asegúrese de que a alimentación estea desconectada antes de limpar.
Substitución da lámpada
Before replacing the bulb, turn off the power to the fixture at the circuit breaker. Allow the bulb to cool completely. Carefully remove the glass diffuser, unscrew the old bulb, and screw in a new 100-Watt maximum medium base (E26) incandescent bulb. Reattach the glass diffuser securely.
Resolución de problemas
If your fixture is not operating correctly, refer to the following common issues and solutions:
| Problema | Causa posible | Solución |
|---|---|---|
| A luz non se acende | 1. A enerxía está apagada 2. Bulb is faulty 3. Cableado incorrecto | 1. Comprobar o disxuntor/fusible 2. Substitúe a lámpada 3. Verify wiring connections (consult electrician if needed) |
| Luz parpadea | 1. Bombilla solta 2. Conexión de cableado solta 3. Regulador de intensidade incompatible | 1. Aperte a lámpada 2. Check wiring connections (power off first) 3. Ensure dimmer is compatible with incandescent bulbs |
Especificacións
- Marca: Iluminación de progreso
- Número de modelo: P5604-31
- UPC: 785247560448
- Material: Vidro, Metal
- Remate: Negro
- Estilo: Tradicional
- Tipo de habitación: Ao aire libre
- Forma de iluminación: Muro
- Fonte de luz: Incandescente
- Número de fontes de luz: 1
- Wattage: 100 vatios (máx.)
- Base da lámpada: E26 (medio)
- Voltage: 120 voltios
- Dimensións do artigo (L x W x H): 8.5 cm de longo x 8.5 cm de ancho x 6 cm de alto
- Peso do artigo: 1.5 libras
- Nivel de resistencia á auga: Resistente á auga
- Tipo de instalación: Soporte de parede
Garantía e Soporte
Información da garantía
This Progress Lighting fixture is covered by a Garantía limitada do fabricante de 1 anosEsta garantía cobre defectos de materiais e fabricación en condicións normais de uso. Conserve o comprobante de compra para reclamacións de garantía.
Atención ao cliente
For technical assistance, missing parts, or warranty inquiries, please contact Progress Lighting customer service. Refer to the contact information provided on the original packaging or visit the official Progress Lighting websitio para obter detalles de asistencia.
Recursos en liña: Progress Lighting Store on Amazon