Leland 1400 Single Lever Tub and Shower Faucet

1. Introdución

This manual provides detailed instructions for the installation, operation, and maintenance of your DELTA FAUCET Leland 1400 Single Lever Tub and Shower Faucet. Please read all instructions carefully before beginning installation or use to ensure proper function and safety.

The Leland 1400 series features a single lever design for temperature and flow control, a Monitor Scald-Guard valve to maintain water temperature, and a Touch-Clean showerhead for easy maintenance. This product is constructed from solid brass for durability and reliability.

2. Información de seguridade

• Peche sempre a subministración principal de auga antes de instalar ou facer o mantemento da billa.
• Use equipo de protección individual axeitado, como lentes de seguridade, durante a instalación.
• Se tes algunha dúbida sobre calquera parte do proceso de instalación, consulta cun fontaneiro cualificado.
• Asegúrate de que todas as conexións estean seguras para evitar fugas.
• Do not use harsh chemicals or abrasive cleaners on the faucet finish, as this may damage the product and void the warranty.

3. Contido do paquete

Verifique que estean presentes todos os compoñentes antes de comezar a instalación. O paquete debe conter:

• Single lever tub and shower faucet trim
• Showerhead with Touch-Clean nozzles
• Tub spout with pull-up diverter
• Mounting hardware and seals
• Instrucións de instalación

Note: The rough-in valve (Monitor Scald-Guard) is typically sold separately and must be installed according to its specific instructions.

4. Configuración e instalación

This section outlines the general steps for installing the Leland 1400 tub and shower faucet trim. Refer to the rough-in valve's specific instructions for valve body installation.

1. Prepare a zona de instalación: Ensure the rough-in valve is securely installed in the wall and the water supply is turned off. Clear any debris from the pipes.
2. Install the Showerhead: Apply plumber's tape to the threaded end of the shower arm extending from the wall. Thread the showerhead onto the shower arm and hand-tighten. Use a wrench to tighten an additional 1/4 to 1/2 turn. Do not overtighten.
3. Install the Tub Spout: The tub spout is a pull-up diverter type. Depending on your rough-in plumbing, it will either thread directly onto a pipe extending from the wall or secure with a set screw onto a smooth copper pipe. Ensure the spout is flush against the wall and sealed properly.
4. Install the Faucet Handle Trim: Follow the instructions provided with your specific rough-in valve for installing the escutcheon (wall plate) and the single lever handle. This typically involves securing the escutcheon to the valve body and then attaching the handle.
5. Proba de fugas: Once all components are installed, slowly turn on the main water supply. Check all connections for leaks. If leaks are present, turn off the water, tighten the connections, and retest.

Image 1: The Leland 1400 Single Lever Tub and Shower Faucet, showcasing its design and components. This image illustrates the installed faucet, including the showerhead, single lever handle, and tub spout.

5. Instrucións de funcionamento

The Leland 1400 faucet features a single lever for controlling both water temperature and flow.

• Turning On/Off and Adjusting Flow: Lift the single lever handle to turn on the water and increase flow. Push the lever down to decrease flow and turn off the water.
• Axuste da temperatura: Rotate the single lever handle left (counter-clockwise) for hotter water and right (clockwise) for colder water. The Monitor Scald-Guard valve will help maintain a consistent temperature within +/-3 degrees Fahrenheit, preventing sudden temperature changes.
• Desvío de auga á ducha: To divert water from the tub spout to the showerhead, pull up the knob on the top of the tub spout. Push the knob down to return water flow to the tub spout.

6. Mantemento

Unha limpeza e un mantemento regulares garantirán a lonxevidade e o rendemento óptimo da súa billa.

• Limpeza do acabado da billa: Limpar a billa cun suave, damp cloth. For stubborn spots, use a mild soap and water solution. Rinse thoroughly and dry with a soft cloth. Avoid abrasive cleaners, harsh chemicals, or polishes, as these can damage the finish.
• Cleaning the Touch-Clean Showerhead: The showerhead features Touch-Clean nozzles. To remove mineral buildup, simply rub the rubber nozzles with your finger or a soft brush. This helps maintain spray performance.
• Mantemento do cartucho: If you experience consistent drips or significant changes in water flow/temperature control, the pressure balance cartridge may need servicing or replacement. Refer to the rough-in valve's manual or contact customer support for guidance.

7 Solución de problemas

If you encounter issues with your Leland 1400 faucet, refer to the following common solutions:

If these solutions do not resolve the issue, contact DELTA FAUCET customer support or a qualified plumber.

8. Especificacións

9. Garantía e soporte

This DELTA FAUCET product is backed by a Lifetime Limited Warranty on the faucet and finish. This warranty covers defects in material and manufacturing for as long as the original consumer purchaser owns the home in which the faucet was first installed.

For warranty claims, technical assistance, or to purchase replacement parts, please contact DELTA FAUCET customer support. Keep your proof of purchase for warranty validation.

For more information, visit the official DELTA FAUCET websitio web ou consulte a documentación da garantía incluída co produto.