Geberit PushControl Bathtub Drain and Overflow Unit Model 151.603 Instruction Manual

1. Introdución

This manual provides detailed instructions for the installation, operation, and maintenance of your Geberit PushControl Bathtub Drain and Overflow Unit, Model 151.603. This unit is designed for bathtubs with depths ranging from 17 to 24 inches and features a 27-inch stainless steel cable for reliable operation. Please read this manual thoroughly before installation and use to ensure proper function and safety.

The Geberit PushControl system offers a convenient push-button mechanism for opening and closing the bathtub drain, providing a clean and modern aesthetic for your bathroom.

2. Información de seguridade

AVISO: O incumprimento destas instrucións de seguridade podería provocar danos materiais, lesións persoais ou a morte.

• Always turn off the water supply before beginning any plumbing work.
• Use equipos de protección individual axeitados, como lentes e luvas de seguridade, durante a instalación.
• Asegúrate de que todas as conexións estean seguras e estancas para evitar fugas.
• Se tes algunha dúbida sobre calquera parte do proceso de instalación, consulta cun fontaneiro cualificado.
• Manteña as pezas pequenas fóra do alcance dos nenos para evitar riscos de asfixia.

3. Contido do paquete

Comprobe que todos os compoñentes estean presentes antes de comezar a instalación:

• Geberit PushControl Bathtub Drain and Overflow Unit (Model 151.603)
• Brass trim (Polished Chrome)
• Colador de aceiro inoxidable
• 27" stainless steel cable (Teflon coated)
• Ferramenta de instalación
• Gaskets and fasteners

4. Especificacións

5. Instalación

Before you begin, ensure you have all necessary tools and that the water supply to the bathtub is turned off. Refer to local plumbing codes for specific requirements.

5.1 Ferramentas necesarias

• Masilla de fontaneiro ou selante de silicona
• Chave inglesa axustable ou peches de canle
• Desaparafusador (Phillips e cabeza plana)
• Cinta métrica
• Luvas e lentes de seguridade

5.2 Instalación paso a paso

1. Preparar a bañeira: Ensure the bathtub drain and overflow holes are clean and free of debris. The overflow hole should be between 2" and 2-1/2" in diameter.
2. Install the Drain Shoe: Apply plumber's putty or silicone sealant around the underside of the drain flange. Insert the drain flange into the bathtub drain hole from the inside of the tub. From underneath the tub, attach the drain shoe assembly, ensuring the gasket is properly seated. Tighten securely with an adjustable wrench.
3. Install the Overflow Assembly: Position the overflow gasket on the back of the overflow plate. Insert the overflow pipe assembly into the overflow hole from the outside of the tub. Align the overflow plate with the overflow hole from the inside of the tub and secure it with the provided screw. Ensure the cable is routed correctly and not kinked.
4. Conecte o cable: Connect the 27" stainless steel cable to both the drain stopper mechanism and the PushControl overflow trim. Follow the specific instructions provided with the unit for proper cable attachment and adjustment. The installation tool included will assist with this step.
5. Connect to Waste Pipe: Connect the 1-1/2" tubular piping of the drain and overflow unit to your existing waste pipe system. Ensure all connections are tight and sealed to prevent leaks.
6. Proba de fugas: Fill the bathtub with water and check all connections for any signs of leakage. Operate the PushControl mechanism several times to ensure the drain stopper opens and closes smoothly.

Image 1: Geberit PushControl Bathtub Drain and Overflow Unit (Model 151.603) showing the polished chrome trim and cable assembly. This image illustrates the main components of the unit.

6. Funcionamento

The Geberit PushControl system is designed for simple and intuitive operation.

• Para pechar o sumidoiro: Firmly press the center of the overflow trim plate. The drain stopper will move into the closed position, allowing the tub to fill with water.
• Para abrir o sumidoiro: Firmly press the center of the overflow trim plate again. The drain stopper will release, allowing water to drain from the tub.

Ensure the mechanism operates smoothly. If you experience resistance, refer to the Troubleshooting section.

7. Mantemento

Regular cleaning and maintenance will ensure the longevity and proper function of your Geberit PushControl unit.

• Limpeza dos remates: Clean the polished chrome trim with a soft cloth and mild, non-abrasive cleaner. Avoid harsh chemicals, abrasive pads, or acidic cleaners, as these can damage the finish.
• Cleaning the Drain: Periodically remove the drain stopper and clean any hair or debris that may have accumulated in the drain opening.
• Inspección de cables: Annually inspect the stainless steel cable for any signs of wear or damage. While the cable is Teflon coated for durability, extreme conditions or improper use can cause wear.

8 Solución de problemas

If problems persist after attempting these solutions, please contact Geberit customer support or a qualified plumber.

9. Garantía e soporte

Geberit products are manufactured to the highest quality standards and come with a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Geberit websitio.

For technical assistance, replacement parts, or further support, please contact Geberit customer service:

• Websitio: www.geberit.com
• Atención ao cliente: Refer to the Geberit websitio web para obter información de contacto rexional.

Ao contactar co servizo de asistencia, teña á man o número de modelo do produto (151.603) e a data de compra.