Xantrex PROwatt SW 1000 Inverter (Model 806-1210) Instruction Manual

1. Introdución

This manual provides essential information for the safe and efficient operation of your Xantrex PROwatt SW 1000 Inverter (Model 806-1210). This pure sine wave inverter converts 12 VDC battery power to 120 VAC household power, suitable for a wide range of electronic devices and appliances. Please read this manual thoroughly before installation and use.

2. Información de seguridade

AVISO: Vol. altotage. Do not open the inverter enclosure. Refer all servicing to qualified personnel.

Always connect the inverter to a properly grounded electrical system.
Asegúrese de que haxa unha ventilación axeitada arredor do inversor para evitar o sobrequecemento.
Do not expose the inverter to moisture, rain, or extreme temperatures.
Disconnect battery power before performing any maintenance or wiring.
Avoid connecting loads that exceed the inverter's rated output power.
Este produto pode conter produtos químicos que o estado de California sabe que causan cancro e defectos de nacemento ou outros danos reprodutivos.

3. Produto rematadoview

The Xantrex PROwatt SW 1000 Inverter is designed for robust performance and ease of use. Key features include:

Saída de onda sinusoidal pura: Proporciona enerxía limpa e estable axeitada para electrónica sensible.
Pantalla dixital: Shows DC input voltage and AC output power.
Porto USB: Built-in 2.1A USB port for charging mobile devices.
Dual GFCI AC Receptacles: For safe operation and protection against ground faults.
Heavy-Duty Terminals: Ensures secure battery connections.
Características de protección avanzada: Includes low voltage shutdown, over voltage protection, overload shutdown, and over temperature shutdown.
Optional Remote Switch: Allows convenient control from a distance.

Xantrex PROwatt SW 1000 Inverter front view — Figura 1: Fronte view of the Xantrex PROwatt SW 1000 Inverter, showing the digital display, USB port, and AC outlets.

4. Configuración

4.1. Montaxe do inversor

Mount the inverter in a dry, well-ventilated area, away from direct sunlight, heat sources, and flammable materials. Ensure there is sufficient space around the unit for airflow, especially around the cooling fans.

4.2. Conexión da batería

Connect the inverter directly to your 12 VDC battery bank using appropriate heavy-gauge cables. Always connect the negative (-) cable first, then the positive (+) cable. Ensure connections are tight and secure to prevent voltage caída e sobrequecemento.

Video 1: This video demonstrates the connection of battery cables to a Xantrex PROwatt SW inverter. While the video features a 2000W model (806-1220), the connection procedure for the 1000W model (806-1210) is similar. Ensure to use appropriate cable gauges for your specific model and installation.

4.3. Conexión de saída de CA

Plug your 120 VAC appliances directly into the dual GFCI AC receptacles on the front of the inverter. For permanent installations, the inverter may be hardwired into your electrical panel by a qualified electrician, utilizing the appropriate terminals.

4.4. Remote Switch Connection (Optional)

If using the optional remote switch, connect its cable to the 'REMOTE' port on the inverter. This allows for convenient power control from a remote location.

5. Instrucións de funcionamento

5.1. Turning the Inverter On/Off

Operación manual: Press the power button on the front panel of the inverter to turn it on or off.
Operación remota: If an optional remote switch is connected, use the switch to power the inverter on or off.

5.2. Pantalla dixital

The built-in digital display provides real-time information:

Voltios de CC: Shows the current input voltage from your battery bank.
Potencia de saída: Displays the current AC power being drawn by your connected appliances.

5.3. Uso do porto USB

The 2.1A USB port can be used to charge USB-powered devices such as smartphones and tablets. Simply plug your device's USB charging cable into the port.

6. Mantemento

Inspección periódica: Periodically check all cable connections for tightness and corrosion.
Limpeza: Manteña as aberturas de ventilación do inversor libres de po e residuos. Use un pano seco para limpar o exterior. Non empregue produtos de limpeza líquidos.
Saúde da batería: Ensure your battery bank is properly maintained and charged to prolong the life of both the batteries and the inverter.

7 Solución de problemas

The Xantrex PROwatt SW 1000 Inverter includes several protection features that may cause the unit to shut down or alarm. Refer to the digital display for specific status indicators.

Problema	Causa posible	Solución
Baixo Voltage Shutdown (10.5 Vdc)	Batería voltage moi baixo.	Recharge or replace battery. Reduce load.
Baixo Voltage Alarm (11.0 Vdc)	Batería voltage approaching critical level.	Reduce load. Recharge battery soon.
Máis de Voltage Protection (15.5 Vdc)	Vol. De entradatage moi alto.	Check charging system. Disconnect inverter if voltage remains high.
Apagado por sobrecarga	A carga conectada supera a capacidade do inversor.	Reduce load. Restart inverter.
Apagado por sobretemperatura	Inverter is overheating.	Ensure adequate ventilation. Reduce load. Allow to cool.

8. Especificacións

Característica	Detalle
Nome do modelo	806-1210
Wat continuotage	1000 vatios
Surge Wattage	2000 vatios
Vol. De entradatage	12 VDC
Vol. De saídatage	120 VCA
Frecuencia de saída	60 Hz
Forma de onda de saída	Pura Sine Wave
Saída USB	2.1A
Dimensións do produto	8.7 x 13.4 x 3.5 polgadas
Peso do elemento	7.2 libras
Temperatura de funcionamento	32 °F - 104 °F (0 °C - 40 °C)

9. Garantía e soporte

For warranty information and technical support, please refer to the documentation included with your product or visit the official Xantrex website. Extended protection plans may be available for purchase.

Exención de responsabilidade legal: Used Item. Tested upon removal from vehicle. If unhappy with purchase simply return for refund.

	Guía de selección de inversores e cargadores de baterías Xantrex \| Atopa a túa solución de enerxía Guía completa para escoller o inversor, inversor/cargador e cargador de batería Xantrex axeitados para as túas necesidades. Compara modelos, características e aplicacións para sistemas de 110 V CA e 230 V CA.
	Manual do propietario do inversor de onda sinusoidal Xantrex 1000/1800 Manual completo do propietario para os modelos 1000, 1000i, 1800 e 1800i do inversor de onda sinusoidal Xantrex, que detalla a instalación, o funcionamento, a seguridade, a resolución de problemas e as especificacións para unha alimentación de CA fiable.
	Freedom X 1200 PRO 120VAC 12VDC Sine Wave Inverter Owner's Guide This owner's guide provides detailed instructions for installing, operating, configuring, maintaining, and troubleshooting the Xantrex Freedom X 1200 PRO 120VAC 12VDC Sine Wave Inverter for recreational, commercial, and fleet vehicle applications.
	Guía de instalación do inversor Xantrex Freedom Xi para uso en autocaravanas, frotas e mariñas Esta guía de instalación proporciona instrucións detalladas e información de seguridade para instalar e configurar o inversor de onda sinusoidal Xantrex Freedom Xi en vehículos recreativos, vehículos de frotas e aplicacións mariñas.
	Manual do propietario do inversor de onda sinusoidal Xantrex Prosine 1000/1800 Manual completo do propietario para os inversores de onda sinusoidal Prosine Xantrex modelos 1000, 1000i, 1800 e 1800i. Abarca a instalación, o funcionamento, a seguridade, a resolución de problemas e as especificacións.
	Manual do propietario do inversor de onda sinusoidal Xantrex 1000/1800 Manual do propietario para os modelos 1000, 1000i, 1800 e 1800i do inversor de onda sinusoidal Xantrex. Abarca a instalación, o funcionamento, a seguridade, a resolución de problemas e as especificacións para unha conversión de enerxía fiable.

Xantrex 806-1210