Sioux Chief 555-4

Sioux Chief Tube Talon 555-4 Instruction Manual

Modelo: 555-4 | Marca: Xefe Sioux

1. Introdución

The Sioux Chief Tube Talon 555-4 is a specialized fastener designed to securely attach 1-inch PEX tubing to wood surfaces. This instruction manual provides essential information for proper installation and use, ensuring optimal performance and compliance with plumbing codes.

2. Approved Uses

The Tube Talon is approved for securing various types of tubing and lines to wood surfaces. Approved applications include:

  • Tubo de cobre
  • CPVC tube
  • PEX/PB tube
  • CSST lines
  • Flexible gas tubing
  • Plastic/steel conduit
  • Baixo voltage DataCom cable
Sioux Chief Tube Talon for 1-inch PEX Tubing

Image 1: Sioux Chief Tube Talon 555-4, a black plastic pipe support with an integrated nail, designed for securing 1-inch PEX tubing.

3. Instrucións de instalación

Follow these steps for proper installation of the Tube Talon:

  1. Posicionamento: Place the Tube Talon around the 1-inch PEX tubing at the desired fastening point on a wood surface.
  2. Alternating Direction: For secure installation, it is recommended to install fasteners in alternating directions. This means the integrated nail should be on alternating sides of the tubing being fastened along its run.
  3. Fastening Intervals: Install fasteners at intervals that comply with local plumbing codes for the specific type of pipe or tube being fastened. Consult your local codes for precise requirements.
  4. IPS Tube Sizing: When fastening IPS (Iron Pipe Size) tube, use the next larger size fastener. For example, if you are fastening 1/2-inch IPS tube, use a 3/4-inch fastener. This 1-inch Tube Talon is designed for 1-inch PEX tubing.
  5. Anexo seguro: Drive the integrated nail into the wood surface until the Tube Talon is firmly secured and the tubing is held in place without excessive movement.

4. Especificacións

FabricanteXefe Sioux
Número de peza555-4
Tamaño1 inch (for PEX Tubing)
MaterialPlástico
Cantidade do paquete do artigo1

5. Mantemento

The Sioux Chief Tube Talon is designed for long-term durability and requires minimal maintenance.

  • Inspección periódica: Periodically inspect installed Tube Talons to ensure they remain securely fastened and that the tubing is properly supported.
  • Limpeza: Se é necesario, limpar con adamp cloth. Avoid harsh chemicals that may degrade the plastic material.

6 Solución de problemas

While the Tube Talon is a simple and reliable product, here are some common considerations:

  • Tubing Not Secure: Ensure the nail is fully driven into the wood surface. Verify that the correct size Tube Talon is used for the tubing diameter. For IPS tubing, remember to use the next larger size fastener.
  • Fastener Damage: If a Tube Talon is damaged during installation or inspection, replace it immediately to maintain proper support.
  • Compliance Issues: Always refer to local plumbing codes for specific requirements regarding fastener spacing and approved uses.

7. Garantía e soporte

For specific warranty information or technical support regarding the Sioux Chief Tube Talon 555-4, please contact Sioux Chief directly through their official websitio ou canles de atención ao cliente.

© 2023 Sioux Chief. All rights reserved.

This manual is for informational purposes only. Always consult local codes and professional advice for plumbing installations.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.