SAMSON SWA3LM5

Samson LM5 Lavalier Microphone User Manual

Model: SWA3LM5

1. Introdución

The Samson LM5 Lavalier Microphone is a compact, omnidirectional condenser microphone designed for clear and articulate vocal reproduction. It features a P3 (TA3F) locking connector, making it compatible with various Samson wireless bodypack transmitters, such as the UT1L. Its small size and clip-on design make it ideal for presentations, broadcasts, and other applications requiring discreet microphone placement.

Samson LM5 Lavalier Microphone with P3 connector and cable

Image: The Samson LM5 Lavalier Microphone, showing its compact design, foam windscreen, clip, and the P3 (TA3F) locking connector at the end of its cable.

2. Información de seguridade

  • Do not expose the microphone to extreme temperatures, humidity, or direct sunlight.
  • Avoid dropping or subjecting the microphone to strong impacts.
  • Manteña o micrófono lonxe de campos magnéticos fortes.
  • Do not attempt to disassemble or modify the microphone. This will void the warranty.
  • Clean the microphone with a soft, dry cloth only. Do not use liquid cleaners.
  • Ensure proper connection to compatible equipment to prevent damage.

3. Contido do paquete

Upon opening the package, verify that all listed items are present and in good condition:

  • Samson LM5 Lavalier Microphone with P3 Connection for Bodypack Transmitters
  • Samson 1 Year Limited Warranty Information

4. Configuración

  1. Conexión do micrófono: Locate the P3 (TA3F) locking connector on the LM5 microphone cable. Align the connector with the corresponding input on your compatible Samson bodypack transmitter (e.g., UT1L). Push the connector firmly into the input until it clicks into place, indicating a secure lock.
  2. Colocación do micrófono: Use the integrated clip to attach the LM5 microphone to clothing, such as a lapel, tie, or collar. Position the microphone approximately 6-12 inches (15-30 cm) from the speaker's mouth for optimal sound capture.
  3. Windscreen Placement: Ensure the foam windscreen is securely placed over the microphone capsule. This helps to reduce plosive sounds and wind noise.

5. Instrucións de funcionamento

The Samson LM5 is an omnidirectional microphone, meaning it picks up sound equally from all directions. This characteristic makes it forgiving in terms of placement but also susceptible to ambient noise.

  1. Acendido: Once connected to a compatible bodypack transmitter, power on the transmitter according to its specific instructions. The microphone draws power from the transmitter.
  2. Level Setting: Adjust the input gain or level on your bodypack transmitter or mixing console to achieve an optimal signal level without distortion. Monitor the audio output to ensure clear sound.
  3. Seguimento: Always monitor the audio output through headphones or speakers to ensure the microphone is picking up sound correctly and at the desired volume.

6. Mantemento

  • Limpeza: Use a soft, dry, lint-free cloth to wipe down the microphone body and cable. Do not use abrasive cleaners, solvents, or chemical sprays.
  • Coidado do parabrisas: The foam windscreen can be gently removed and cleaned with mild soap and water if necessary. Ensure it is completely dry before reattaching.
  • Xestión de cables Avoid sharp bends or kinks in the microphone cable. Store the cable loosely coiled to prevent damage to the internal wiring.
  • Inspección de clips: Periodically inspect the microphone clip for any signs of wear or damage. While the clip is designed for durability, excessive force or improper handling can cause breakage.

7 Solución de problemas

ProblemaCausa posibleSolución
Non se emite son polo micrófono.
  • Micrófono non conectado correctamente.
  • Transmitter not powered on or battery low.
  • Input gain too low on transmitter/mixer.
  • Faulty cable or microphone.
  • Ensure P3 connector is fully seated and locked.
  • Check transmitter power and replace batteries if needed.
  • Aumenta gradualmente a ganancia de entrada.
  • Test with another microphone or cable if available.
O son está distorsionado ou pouco claro.
  • Ganancia de entrada demasiado alta (recorte).
  • O micrófono está moi preto da fonte de son.
  • Interferencias doutros dispositivos electrónicos.
  • Decrease input gain.
  • Adjust microphone distance from source.
  • Move microphone/transmitter away from potential interference sources.
Microphone clip detaches easily.
  • Clip worn or damaged.
  • Apego inadecuado.
  • Ensure the microphone is securely snapped into the clip.
  • Consider replacing the clip if it is visibly damaged or no longer holds securely.
Windscreen falls off frequently.
  • Windscreen is loose or worn.
  • Ensure the windscreen is fully pushed onto the microphone capsule.
  • Replace the windscreen if it no longer fits snugly.

8. Especificacións

CaracterísticaDetalle
Factor de forma do micrófonoLavalier (microphone only)
Patrón polarOmnidireccional
Tipo de conectorP3 (TA3F)
Tecnoloxía de conectividadeCon cable
Relación sinal-ruído78 dB
MaterialPlástico, Metal
CorNegro
Peso do elemento27.67 g (0.977 onzas)
Dimensións do produto (L x W x H)51.57 x 0.39 x 0.39 polgadas
Número de modeloSWA3LM5
UPC809164206415
FabricanteSansón

9. Garantía e soporte

The Samson LM5 Lavalier Microphone is covered by a Samson 1 Year Limited Warranty from the date of original purchase. This warranty covers defects in materials and workmanship under normal use.

For warranty service, technical support, or product inquiries, please contact Samson customer support through their official websitio web ou centros de servizo autorizados. Garde o comprobante de compra para reclamacións de garantía.

Recursos en liña: For additional information, FAQs, and product registration, visit the official Samson websitio: www.samsontech.com

© 2024 Samson Technologies. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.