Manual de usuario

Introdución

This manual provides instructions for the proper setup, operation, and maintenance of your Bunker Hill Security Battery Operated LED Motion Sensor Light, Model 95276. This device is designed to provide illumination in areas without electrical outlets, such as sheds, closets, and stairwells, offering both convenience and security.

The light features a super bright LED lamp and a three-way switch for continuous, automatic (motion-activated), or off operation, allowing for energy saving in auto mode.

Figura 1: Fronte view of the Bunker Hill Security Battery Operated LED Motion Sensor Light, showing the light panel and motion sensor lens.

Información de seguridade

• Le todas as instrucións antes de usar.
• Non mesture pilas vellas e novas. Non mesture pilas alcalinas, estándar (carbón-zinc) ou recargables (níquel-cadmio).
• Despeje as pilas usadas correctamente segundo a normativa local.
• Non expoña a unidade a temperaturas ou humidade extremas.
• This product is intended for indoor use or sheltered outdoor locations where it will not be directly exposed to weather elements.

Contido do paquete

• 1 x Bunker Hill Security Battery Operated LED Motion Sensor Light (Model 95276)
• Manual de usuario
• Note: Four AA batteries are required for operation and are not included.

Configuración

1. Instalación da batería

1. Localice a tapa do compartimento da batería na parte traseira da unidade.
2. Deslice ou solte a tapa para abrir o compartimento.
3. Insira catro (4) pilas AA, asegurándose de manter a polaridade correcta (+/-) como se indica no interior do compartimento.
4. Coloque a tapa do compartimento da batería de forma segura.

2. Montaxe e colocación

The light can be placed on a flat surface or mounted to a wall. Consider the following for optimal performance:

• Choose a location where the motion sensor will have an unobstructed view da zona que desexa controlar.
• Avoid placing the light near heat sources or in direct sunlight, as this may affect sensor performance.
• For wall mounting, use appropriate screws (not included) to secure the unit through the designated mounting holes on the back.

Instrucións de funcionamento

The Bunker Hill Security LED Motion Sensor Light features a three-way switch located on the unit. This switch controls the operating mode:

• OFF: In this position, the light is completely off and will not activate.
• ON (Continuous): In this position, the light will remain continuously illuminated, regardless of motion or ambient light conditions.
• AUTOMÁTICO: In this position, the light will activate automatically when motion is detected within its range, provided the ambient light is low enough. The light will turn off automatically after a period of no motion. This mode is designed to save energy.

Select the desired mode by sliding the switch to the corresponding position.

Mantemento

Substitución da batería

When the light begins to dim or stops functioning, it is time to replace the batteries. Follow the battery installation steps outlined in the Setup section.

Limpeza

To clean the unit, wipe it with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or internal components.

Resolución de problemas

Especificacións

• Marca: Bunker Hill Security
• Modelo: 95276
• Fonte de enerxía: 4 pilas AA (non incluídas)
• Tipo de lámpada: LED
• Wattage: 5 vatios
• Características especiais: Motion-Sensor, Three-way switch (OFF/ON/AUTO)
• Material: Plástico duro
• Cor: Branco
• Peso do artigo: 3.2 onzas
• Dimensións xerais: 1-5/8" de longo x 3-1/4" de ancho x 4-5/8" de alto

Garantía e Soporte

Specific warranty information and customer support contact details are not provided in the product description. Please refer to the product packaging or the retailer where the item was purchased for warranty terms and support options.