Introdución
The Strymon El Capistan dTape Echo pedal is designed to emulate the natural warmth and unique sonic characteristics of classic tape delay units. Utilizing advanced SHARC DSP technology, it offers three distinct tape machine styles and a wide range of adjustable parameters, along with bonus features like onboard spring reverb and a sound-on-sound looper. This manual provides detailed instructions for setting up and operating your El Capistan pedal.
Características clave
- Five tape adjustment and tone shaping knobs: Time, Mix, Tape Age, Repeats, Wow & Flutter.
- Ultra low noise, high performance 24-bit 96kHz A/D and D/A converters.
- 115dB typical signal to noise ratio.
- Super high performance DSP in a compact form factor.
- True Bypass (electromechanical relay switching).
Configuración
To set up your Strymon El Capistan pedal, follow these steps:
- Conexión de alimentación: Connect a 9V DC power supply (center-negative, 100mA minimum) to the 9VDC input jack on the rear of the pedal. Ensure the power supply meets the specified requirements to prevent damage.
- Conexión de entrada: Connect your instrument (e.g., guitar) to the INPUT jack on the rear of the pedal using a standard 1/4-inch instrument cable.
- Conexión de saída: Connect the LEFT OUT and/or RIGHT OUT jacks to your amplifier or audio interface using 1/4-inch instrument cables. For mono operation, use the LEFT OUT jack. For stereo operation, use both LEFT OUT and RIGHT OUT.
- Expression Pedal (Optional): An optional expression pedal can be connected to the EXP jack for real-time control over various parameters.
Instrucións de funcionamento
The El Capistan offers a comprehensive set of controls to shape your tape echo sound. Familiarize yourself with the primary and secondary functions of each control.
Controis primarios
- HORA: Controls the delay time of the echo repeats.
- MESTURA: Adjusts the wet/dry ratio of the effect. Turn clockwise for more effect, counter-clockwise for less.
- TAPE AGE: Controls the bandwidth of the tape, simulating the degradation of older tape.
- REPETICIÓNS: Controls the feedback of the delay, determining the number of repeats.
- WOW & FLUTTER: Controls the amount of mechanically related tape speed fluctuations, adding vintage personaxe.
- TAPE HEAD Switch: Selects between three tape head configurations: Fixed, Multi, and Single.
- Interruptor de MODO: Selects between three different tape machine modes (A, B, C), each with unique characteristics.
- Pedal TAP: Tap twice to set the delay time. Hold to engage the Sound-on-Sound Looper.
- Pedal de derivación: Activa ou evita o efecto.
Secondary Controls (Hidden Parameters)
The El Capistan features secondary functions accessible by holding both footswitches while powering on, or by holding the TAP footswitch and turning a knob. Refer to the full user manual for detailed instructions on accessing and adjusting these parameters.
- TIME (Secondary): Controls the spring reverb mix.
- MIX (Secondary): Controls a +/- 3dB boost/cut.
- REPEATS (Secondary): Controls the tape bias.
- TAPE AGE (Secondary): Controls the low-end contour.
- WOW & FLUTTER (Secondary): Controls the amount and severity of tape irregularities.
Mantemento
To ensure the longevity and optimal performance of your El Capistan pedal:
- Keep the pedal clean and free from dust. Use a soft, dry cloth for cleaning.
- Evite expoñer o pedal a temperaturas extremas, humidade ou luz solar directa.
- Do not attempt to open the enclosure or modify the internal components, as this will void the warranty.
- Always use the correct power supply (9V DC, center-negative, 100mA minimum) to prevent electrical damage.
Resolución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| Sen son ou sinal débil | Incorrect cable connections, faulty cables, incorrect power supply, pedal not engaged. | Check all cable connections (input/output). Ensure cables are not damaged. Verify power supply specifications. Press the BYPASS footswitch to engage the effect. |
| Ruído ou zumbido non desexado | Ground loop, faulty power supply, interference from other electronics. | Use an isolated power supply. Try a different power outlet. Move the pedal away from other electronic devices. |
| Effect not working as expected | Incorrect knob settings, secondary functions engaged unintentionally. | Review the operating instructions for knob functions and switch settings. Reset the pedal to factory defaults if necessary (refer to the full user manual for this procedure). |
| Footswitch unresponsive | Internal issue, debris under footswitch. | Ensure the pedal is powered correctly. If the issue persists, contact Strymon support. |
Especificacións
- Marca: Strymon
- Nome do modelo: El Capitán
- Número de modelo: Elcapistan
- Estilo: Delay, Looper, Reverb
- Cor: Black, Gray, Silver
- Voltage: 9 voltios
- Ampera: 100 millónsamps
- Efectos de saída de audio: Atraso
- Tipo de controis: Pomo
- Fonte de enerxía: Eléctrico con cable
- Interface de hardware: Audio de 1/4 de polgada
- Formato do sinal: Analóxico
- Dimensións do artigo: 8 x 8 x 5 polgadas
- Tipo de conector: Conector de audio de 1/4 de polgada (6.35 mm)
- UPC: 852636007232
- Compoñentes incluídos: Sound-on-Sound Looper, Onboard Spring Reverb
Garantía e Soporte
Strymon products are designed for reliability and performance. For warranty information, product registration, or technical support, please visit the official Strymon websitio web ou póñase en contacto co seu departamento de atención ao cliente. Garde o comprobante de compra para reclamacións de garantía.
