1. Introdución
This manual provides comprehensive service and repair information for the 2006 and 2007 model year Ford Taurus vehicles. It is designed for automotive technicians and experienced DIY enthusiasts, offering detailed instructions, specifications, and diagnostic procedures to assist in the proper maintenance and repair of the vehicle.
The content is organized into various sections, each covering specific vehicle systems or components. Always refer to the latest safety guidelines and use appropriate tools and equipment when performing any service or repair.
2. Información xeral e seguridade
2.1 Precaucións de seguridade
Always prioritize safety when working on any vehicle. Disconnect the battery ground cable before working on electrical components. Allow the engine and exhaust system to cool before servicing. Use jack stands to support the vehicle when lifting. Wear appropriate personal protective equipment, including safety glasses and gloves.
2.2 Identificación do vehículo
Locate the Vehicle Identification Number (VIN) on the driver's side dashboard, visible through the windshield, or on the driver's side door jamb. The VIN provides crucial information about the vehicle's manufacturing details and specifications.
3. Sistemas de motor
3.1 Desmontaxe e instalación do motor
Detailed steps for safely removing and installing the engine assembly. This section includes procedures for disconnecting all necessary hoses, wiring, and mounts, as well as torque specifications for reassembly.
3.2 Mantemento do sistema de combustible
Instructions for servicing the fuel pump, fuel injectors, fuel lines, and fuel tank. Includes pressure testing procedures and safety warnings for handling fuel.
3.3 Ignition System Diagnostics
Troubleshooting steps for common ignition system issues, including spark plug inspection, coil pack testing, and sensor diagnostics.
4. Transmission and Drivetrain
4.1 Automatic Transaxle Service
Procedures for fluid changes, filter replacement, and removal/installation of the automatic transaxle. Includes torque converter service and shift cable adjustments.
4.2 Drive Axle and CV Joints
Inspection, removal, and installation of drive axles and constant velocity (CV) joints. Includes boot replacement and lubrication guidelines.
5. Chasis e suspensión
5.1 Suspensión dianteira
Service procedures for front struts, control arms, ball joints, and stabilizer bar. Includes alignment specifications.
5.2 Suspensión traseira
Service procedures for rear shocks, springs, and trailing arms. Includes alignment specifications.
5.3 Sistema de dirección
Power steering pump, rack and pinion, and steering column service. Includes fluid flushing and bleeding procedures.
6. Sistema de freado
6.1 Disc Brake Service
Replacement of brake pads, rotors, and caliper overhaul procedures for both front and rear disc brakes. Includes brake fluid bleeding.
6.2 Sistema de freos antibloqueo (ABS)
Diagnostic procedures for ABS components, including wheel speed sensors and the ABS control module.
7. Electrical and Electronic Systems
7.1 Esquemas de cableado
Comprehensive wiring diagrams for all major electrical circuits, including power distribution, lighting, and accessory systems.
7.2 Probas de compoñentes
Procedures for testing various electrical components such as relays, switches, sensors, and motors using a multimeter.
7.3 Códigos de diagnóstico de problemas (DTC)
Explanation of common DTCs and their diagnostic steps using an OBD-II scanner.
8. Body and Interior
8.1 Exterior Body Panels
Removal and installation procedures for fenders, bumpers, doors, and hood. Includes adjustment guidelines.
8.2 Interior Trim and Components
Instructions for removing and installing dashboard components, door panels, seats, and console. Includes airbag system precautions.
9. Maintenance Schedules
Recommended service intervals for routine maintenance tasks, including:
- Cambios de aceite e filtro
- Tire rotation and pressure checks
- Fluid level checks (coolant, brake, power steering, transmission)
- Air filter and cabin filter replacement
- Spark plug inspection/replacement
- Inspección do sistema de freos
10. Troubleshooting and Diagnostics
This section provides diagnostic charts and procedures for common vehicle issues, such as:
- Engine no-start conditions
- Rough idle or poor performance
- Brake noise or pulsation
- Steering system play or noise
- Avarías do sistema eléctrico
Follow the diagnostic flowcharts to systematically identify and resolve problems.
11. Especificacións técnicas
Detailed technical data for the 2006-2007 Ford Taurus, including:
- Engine torque specifications
- Capacidades e tipos de fluídos
- Tire sizes and pressures
- Electrical component resistance values
- Alignment settings
Always refer to these specifications for accurate repairs and adjustments.
12. Información sobre garantía e soporte
This repair manual is an independent publication and does not imply any affiliation with or endorsement by Ford Motor Company. For specific vehicle warranty information, please refer to your original vehicle owner's manual or contact an authorized Ford dealership. Support for this manual is typically provided by the publisher or retailer from whom it was purchased.
