Introdución
The Philips AJ5000/12 is a digital tuning clock radio designed to provide timekeeping, alarm functions, and FM radio reception. It features a clear digital display, dual alarm settings, and mood-lighting capabilities to enhance your waking experience. This manual provides detailed instructions for setting up and operating your device.
Produto rematadoview
Figura 1: Fronte view of the Philips AJ5000/12 Digital Tuning Clock Radio, displaying the time and alarm indicators.
The Philips AJ5000/12 combines a clock, alarm, and FM radio into a compact unit. Key features include:
- Digital FM radio tuner for clear reception.
- Dual alarm function for separate wake-up times.
- Snooze feature for additional sleep time.
- Brillo da pantalla axustable.
Configuración
1. Conexión de alimentación
Connect the power adapter to the DC input jack on the back of the clock radio and then plug the adapter into a wall outlet. The unit will power on and the display will illuminate.
2. Battery Installation (Backup)
Para enerxía de reserva durante a saídatages, install 2 Lithium Ion batteries (not included) into the battery compartment located on the bottom of the unit. Ensure correct polarity (+/-) as indicated inside the compartment. These batteries maintain time and alarm settings during a power interruption but do not power the main functions of the device.
3. Configuración da antena
Extend the FM antenna wire fully for optimal radio reception. Adjust its position to improve signal clarity if needed.
Instrucións de funcionamento
1. Axustar a hora
- Press and hold the 'TIME SET' button until the hour digits flash.
- Use the 'HOUR' and 'MINUTE' buttons to adjust the time.
- Press 'TIME SET' again to confirm the setting.
2. Configuración de alarmas (alarma 1 e alarma 2)
The clock radio features two independent alarms.
- Press and hold the 'ALARM 1' or 'ALARM 2' button until the alarm time digits flash.
- Use the 'HOUR' and 'MINUTE' buttons to set the desired alarm time.
- Press the 'ALARM 1' or 'ALARM 2' button again to select the alarm source (Buzzer or FM Radio). The corresponding alarm icon will appear on the display.
- To deactivate an alarm, press the 'ALARM 1' or 'ALARM 2' button repeatedly until the alarm icon disappears.
3. Función de repetición da alarma
When an alarm sounds, press the 'SNOOZE' button (located on top) to temporarily silence the alarm. The alarm will sound again after approximately 9 minutes.
4. Funcionamento da radio FM
- Press the 'RADIO ON/OFF' button to turn on the FM radio.
- Press the 'TUNE +' or 'TUNE -' buttons to manually tune to a desired frequency.
- To auto-scan for stations, press and hold 'TUNE +' or 'TUNE -' until the frequency starts scanning.
- To preset a station, tune to the desired station, then press and hold a 'PRESET' button (e.g., P1, P2) until the preset number flashes. Release the button to save.
5. Control do brillo da pantalla
Use the 'BRIGHTNESS CONTROL' button (located on top) to adjust the intensity of the digital display. Press repeatedly to cycle through different brightness levels.
Mantemento
Limpeza
Wipe the unit with a soft, dry cloth. Do not use abrasive cleaners, solvents, or strong detergents, as these may damage the plastic enclosure. Ensure the unit is unplugged before cleaning.
Substitución da batería
If the backup batteries are depleted, replace them with new Lithium Ion batteries to ensure time and alarm settings are retained during power outagDesfágase das baterías vellas de forma responsable.
Resolución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| Sen alimentación / Pantalla apagada | O adaptador de corrente non está conectado ou a toma de corrente está defectuosa. | Comprobe a conexión de corrente e probe cunha toma de corrente diferente. |
| Recepción de radio FM deficiente | Antena non estendida ou con interferencias. | Estenda e recoloque a antena FM. Afaste a unidade doutros dispositivos electrónicos. |
| A alarma non soa | A alarma non está activada ou o volume é demasiado baixo. | Ensure alarm icon is displayed. Increase radio volume if alarm source is radio. |
| Perdeuse a configuración da hora/alarma despois dun apagadotage | As baterías de reserva están gastadas ou non están instaladas. | Install or replace backup batteries. |
Especificacións
- Marca: Philips
- Número de modelo: AJ5000/12
- Fonte de enerxía: AC Power (with 2 Lithium Ion batteries for backup)
- Peso do artigo: 0.6 quilogramos
- Tipo de visualización: Dixital
- Material do recinto: Plástico
- Características especiais: Alarma, radio
Garantía e Soporte
For warranty information and customer support, please refer to the warranty card included with your product or visit the official Philips support websitio. Garde o recibo da compra como proba de compra para calquera reclamación de garantía.