ASUS P8H67-V Motherboard User Manual

1. Introdución

The ASUS P8H67-V is an ATX motherboard designed to support 2nd Generation Intel Core i7/Core i5/Core i3 Processors, utilizing the Intel H67 chipset. This motherboard offers a range of features including SATA 6 Gb/s, USB 3.0, and support for DDR3 1333MHz memory. This manual provides essential information for the proper installation, configuration, and maintenance of your motherboard.

2. Características clave

• 2 x SATA 6 Gb/s ports with RAID 0/1/5/10 Support
• 2 x PCIe 2.0 x16 slots (Blue@x16, Black@x4) with AMD Quad-GPU CrossFireX support
• Dual-channel DDR3 1333/1066MHz memory support (up to 32GB across 4 slots)
• 1 x UltraDMA 133/100/66 (IDE) port
• 2 x USB 3.0 ports (on back panel) and 12 x USB 2.0 ports (4 on back panel, 8 via mid-board headers)
• Integrated HDMI, DVI, and D-Sub (VGA) display outputs
• 1 x COM port connector
• Gigabit LAN featuring Realtek Chipset

3. Configuración e instalación

3.1 Instalación física

Before installing the motherboard, ensure your computer case is compatible with the ATX form factor. Handle the motherboard by its edges to avoid static discharge.

1. Preparar o caso: Instala a protección de E/S na abertura traseira da caixa do teu ordenador.
2. Instalar a CPU: Carefully open the LGA 1155 socket lever, align the CPU with the socket (matching the golden triangle on the CPU to the triangle on the socket), gently place the CPU into the socket, and close the lever to secure it.
3. Instalar o refrigerador da CPU: Mount the compatible CPU cooler according to its manufacturer's instructions.
4. Instalar módulos de memoria: Open the clips of the DDR3 DIMM slots. Align the memory modules with the slots, ensuring the notch on the module matches the key in the slot. Press down firmly on both ends until the clips snap into place. For dual-channel operation, refer to the motherboard manual for recommended slot configurations.
5. Montar a placa base: Carefully place the motherboard into the case, aligning the screw holes with the stand-offs. Secure the motherboard with screws. Note: The P8H67-V has 6 stand-off mounts. For areas lacking support, such as near the RAM slots and SATA connectors, consider using a non-conductive wedge underneath when plugging in components to prevent flexing.

3.2 Conexión de compoñentes

Connect all necessary power cables, data cables, and front panel connectors to the motherboard.

• Conectores de alimentación: Conecta o conector de alimentación principal ATX de 24 pines e o conector de alimentación da CPU de 8 pines da fonte de alimentación á placa base.
• Dispositivos SATA: Connect your storage drives (HDDs, SSDs, optical drives) to the SATA 6 Gb/s (SATA3_0, SATA3_1) or SATA 3 Gb/s (SATA2_0 to SATA2_3) ports.
• IDE Devices: If using an older IDE optical drive or HDD, connect it to the UltraDMA 133/100/66 (IDE) port.
• Conectores do panel frontal: Connect the power button, reset button, HDD LED, power LED, and front panel USB/audio headers to their respective pins on the motherboard. Refer to the motherboard diagram for correct pin assignments.
• Conexións do panel traseiro: Connect peripherals such as keyboard/mouse (PS/2), USB devices (USB 2.0/3.0), Ethernet cable (RJ-45), and display cables (HDMI, DVI, VGA) to the rear I/O panel.

Figura 1: Máisview of the ASUS P8H67-V Motherboard. This image displays the full layout of the motherboard, highlighting key components such as the CPU socket, RAM slots, PCIe slots, SATA ports, and various headers.

Figure 2: Rear I/O Panel of the ASUS P8H67-V Motherboard. This image shows the various external ports available, including PS/2, USB 2.0, USB 3.0, HDMI, DVI, VGA, Ethernet, and audio jacks.

3.3 Encendido inicial

After all components are connected, ensure your power supply is switched on. You can initiate power by pressing the case's power button or by briefly shorting the power pins on the front panel header with a screwdriver (the 'screwdriver method').

4. Instrucións de funcionamento

4.1 Configuración da BIOS/UEFI

The P8H67-V features a user-friendly UEFI BIOS. To enter the BIOS setup, press the DEL key during system startup. The BIOS can be navigated using either a mouse or keyboard. You can save all CMOS screen settings to a USB flash drive for future reference or backup.

4.2 Instalación do controlador

After installing your operating system, it is crucial to install the necessary drivers. Always download the latest drivers directly from the official ASUS support website for your specific motherboard model (P8H67-V). Pay particular attention to the chipset, graphics (VGA), audio, and LAN drivers.

Important Note for HDMI Users:

If you plan to use the integrated HDMI output, it is highly recommended to install the specific