Horizon Digital Hanging Scale

Introdución

This manual provides essential instructions for the safe and effective operation, setup, and maintenance of your Horizon SF-918 OCS-L Digital Hanging Scale. Please read this manual thoroughly before using the device to ensure proper function and to prevent damage or injury.

Image: The Horizon SF-918 OCS-L Digital Hanging Scale, showcasing its robust design with a top shackle and a lower weighing hook.

Información de seguridade

• Do not exceed the maximum weight capacity of 300 kg (600 lbs). Overloading can damage the scale and pose a safety risk.
• Ensure the scale is securely suspended from a stable and appropriate support structure before attaching any load.
• Always stand clear of the load during weighing.
• Avoid dropping or subjecting the scale to severe impacts.
• Do not immerse the scale in water or expose it to excessive moisture. While durable, it is not waterproof.
• Manter fóra do alcance dos nenos.

Contido do paquete

Verifica que todos os elementos estean presentes no paquete:

• Horizon SF-918 OCS-L Digital Hanging Scale
• Top Shackle (pre-attached)
• Bottom Weighing Hook
• 2 x pilas AAA

Image: The Horizon SF-918 OCS-L Digital Hanging Scale as packaged, showing the scale, hooks, and included AAA batteries.

Configuración

1. Instalación da batería:
   • Localice o compartimento da batería na parte traseira da báscula.
   • Abra a tapa da batería.
   • Insira dúas (2) pilas AAA, asegurándose de manter a polaridade correcta (+/-).
   • Close the battery cover securely. Ensure the batteries are firmly seated to prevent intermittent power loss during use.
   

   Imaxe: Unha detallada view of the battery compartment, showing the correct placement of two AAA batteries.

2. Attaching the Bottom Hook:
   • The top shackle is typically pre-attached.
   • Attach the provided bottom weighing hook to the lower attachment point of the scale. Ensure it is securely fastened.
   

   Image: A close-up of the robust top shackle, indicating the secure attachment mechanism for suspending the scale.

Instrucións de funcionamento

The scale features a 1-inch illuminated LCD display and three control buttons: Power, HOLD/UNIT, and TARE.

Imaxe: Unha detallada view of the scale's digital display and control buttons, showing the current weight reading and unit.

1. Encendido/apagado:
   • Preme o Poder botón () to turn the scale ON. The display will show "88888" then "0.0" with the current unit.
   • Manteña premido o Poder button for 3 seconds to turn the scale OFF.
2. Unit Selection (Kg/Lb/N):
   • With the scale ON and displaying "0.0", press the HOLD/UNIT button to cycle through the available weighing units: Kilograms (kg), Pounds (lb), and Newtons (N).
3. Función de tara:
   • To weigh items in a container, first hang the empty container on the hook.
   • Preme o TAREAR botón. A pantalla restablecerase a "0.0".
   • Engada os artigos que se van pesar no recipiente. A pantalla mostrará o peso neto dos artigos.
4. Función de retención:
   • While weighing a load, press the HOLD/UNIT button to lock the current weight reading on the display. The "HOLD" indicator will appear.
   • Preme o HOLD/UNIT button again to release the hold function and return to live weighing.
   • Note: This function holds the weight displayed at the moment the button is pressed, not necessarily the maximum weight achieved during the lift.
5. Procedemento de pesaxe:
   • Ensure the scale is ON and displaying "0.0" in your desired unit.
   • Carefully attach the item to be weighed to the bottom hook.
   • Allow the load to stabilize. The display will show the weight. The reading stable time is typically less than 10 seconds.
   • Remove the load once the reading is taken.
6. Apagado automático:
   • The scale will automatically turn off after approximately 3 minutes of inactivity to conserve battery life. This feature cannot be adjusted or disabled.

Mantemento

• Limpeza: Limpe a báscula cun suave, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish and electronic components. Avoid getting water inside the unit.
• Almacenamento: Garda a báscula nun lugar seco e fresco, lonxe da luz solar directa e de temperaturas extremas. Se a gardas durante un período prolongado, retira as pilas para evitar fugas.
• Substitución da batería: When the battery indicator appears on the display, replace both AAA batteries promptly to ensure accurate readings and proper operation.

Resolución de problemas

A escala non se activa:

Check battery installation. Ensure batteries are inserted with correct polarity and are fully charged. Replace batteries if necessary. Ensure battery contacts are clean and free from corrosion.

Lecturas inexactas:

Ensure the scale is suspended stably and not swinging. Verify the load is not touching any other surfaces. Check if the scale has been overloaded. Perform a tare operation before weighing.

Scale turns off unexpectedly:

This may be due to the 3-minute auto-off feature if no activity is detected. If it turns off during active weighing, check battery contact and ensure batteries are securely seated and not loose.

Display shows "O-Ld" or similar:

This indicates an overload condition. Remove the load immediately to prevent damage to the scale. Do not exceed the 300 kg / 600 lbs capacity.

Especificacións

Garantía e Soporte

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Horizon websitio. Garde o recibo da compra como xustificante da mesma.