Conair BE87MB

Conair Reflections BE87MB 3-Way Touch Control Lighted Makeup Mirror User Manual

Introdución

This manual provides comprehensive instructions for the safe and effective use of your Conair Reflections BE87MB 3-Way Touch Control Lighted Makeup Mirror. This double-sided mirror features 1x and 7x magnification, incandescent lighting with three brightness settings, and a matte black finish. Please read all instructions carefully before use.

Información importante de seguridade

For your safety, always unplug the mirror from the electrical outlet before performing any maintenance, cleaning, or when replacing parts. To prevent distorted reflections and potential eye strain, maintain a distance of at least 6 inches from the magnified side of the mirror during use.

Contido do paquete

  • Conair Reflections BE87MB Lighted Makeup Mirror
  • Integrated 5-foot line cord
  • One 30-watt clear incandescent bulb (pre-installed)

Configuración

  1. Unpack the mirror and all components carefully.
  2. Place the mirror on a stable, flat surface, such as a vanity or tabletop.
  3. Ensure the mirror is positioned in a location where the 5-foot line cord can reach a standard electrical outlet without tension.
  4. Plug the mirror's line cord into a 120V AC household outlet.
Conair Reflections mirror with 5-foot power cord plugged into an outlet, showing the matte black finish.

Image: The Conair Reflections mirror in matte black, illustrating the 5-foot power cord connected to an electrical outlet. This image also highlights the mirror's aesthetic design suitable for various decors.

Instrucións de funcionamento

Axustar a configuración da luz

  1. To activate the light, gently touch the base of the mirror.
  2. Each subsequent touch to the base will cycle through the three brightness settings: low, medium, and high.
  3. To turn off the light, continue touching the base until the light extinguishes.
A hand touching the base of the Conair Reflections mirror to activate the 3-way touch control light settings.

Image: A hand demonstrates the 3-way touch control by touching the base of the mirror. This action cycles the incandescent light through low, medium, and high brightness levels.

Close-up of the Conair Reflections mirror showing the incandescent lighting around the mirror face.

Imaxe: Unha detallada view of the mirror's incandescent lighting, which provides a soft, even illumination for makeup application and grooming.

Using Magnification

The mirror features a double-sided design with two magnification options:

  • Aumento 1x: Provides a standard, true-to-life reflection.
  • Aumento 7x: Offers a magnified view for detailed tasks such as tweezing or precise makeup application.

To switch between magnifications, grasp the mirror frame and gently rotate the mirror head 360 degrees. The mirror will pivot smoothly to display either the 1x or 7x side.

Dous views of the Conair Reflections mirror, one showing 1x magnification and the other showing 7x magnification for detailed tasks.

Image: This illustration compares the 1x and 7x magnification sides of the mirror, demonstrating the clarity and detail provided by the 7x magnification for precise grooming.

Diagram showing the Conair Reflections mirror rotating 360 degrees to switch between its double-sided views.

Image: A visual representation of the mirror's 360-degree rotation capability, allowing users to easily switch between the standard and magnified sides.

Mantemento

Limpeza do espello

  • Desenchufe sempre o espello antes de limpalo.
  • Wipe the mirror surfaces with a soft, damp cloth. A mild glass cleaner can be used if necessary.
  • Do not use abrasive cleaners or harsh chemicals, as these may damage the finish or mirror surface.
  • Asegúrate de que o espello estea completamente seco antes de volvelo conectar.

Substitución da lámpada

The mirror uses a 30-watt clear incandescent bulb. If the bulb needs replacement:

  1. Unplug the mirror from the electrical outlet.
  2. Retire con coidado a lámpada antiga.
  3. Insert a new 30-watt clear incandescent bulb.
  4. Plug the mirror back into the outlet.

Resolución de problemas

ProblemaCausa posibleSolución
A luz non se acende ou é tenue.
  • O espello non está conectado.
  • O bulbo está solto ou queimado.
  • Electrical outlet is not functioning.
  • Asegúrese de que o cable de alimentación estea ben conectado a unha toma de corrente que funcione.
  • Check the bulb; tighten if loose or replace if burned out (refer to "Bulb Replacement" in Maintenance section).
  • Proba a toma con outro aparello.
O control táctil non responde.
  • Temporary electrical interference.
  • Interrupción da alimentación.
  • Unplug the mirror for 30 seconds, then plug it back in to reset the touch sensor.
  • Ensure the base is clean and dry.
Reflection appears distorted.
  • Too far from the magnified mirror.
  • Ensure your face is within 6 inches of the magnified mirror for a clear, undistorted image.

Especificacións

CaracterísticaDetalle
Número de modeloBE87MB
Ampliación1x/7x
Tipo de iluminaciónIncandescente
Configuración de luzLow, Medium, High (3-way touch control)
Diámetro do espello8.5 polgadas (aprox.)
Overall Dimensions (L x W)17.38" de longo x 7.5" de ancho
CorAcabado negro mate
Fonte de enerxíaCorded Electric (5-foot line cord)
MaterialMarco metálico
Tipo de montaxeSoporte de mesa
Diagram showing the dimensions of the Conair Reflections mirror: 11.25 inches wide and 17.38 inches high, with a 7.5 inch mirror face.

Image: A diagram illustrating the key dimensions of the Conair Reflections mirror, including its overall width, height, and the diameter of the mirror face.

Garantía e Soporte

For detailed warranty information and customer support, please refer to the warranty card included with your product or visit the official Conair website. You may also contact Conair customer service directly for assistance with product inquiries, troubleshooting, or parts replacement.

Conair Websitio: www.conair.com

© 2024 Conair Corporation. Todos os dereitos reservados.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.