1. Introdución
The Televes 5363 Minikom FI 2150 MHz Multiband Amplifier is designed for SMATV systems. This broadband amplifier, housed in a Zamak casing, features switched-mode power supplies and allows for independent mixing of MATV signals.
Características principais:
- Banda ancha amplificación.
- Incorporates switched-mode power supplies.
- Allows mixing of MATV signals via an independent input.
- Dimensións compactas: 180 x 110 x 55 mm.
- High-shielding chassis, manufactured from Zamak.
- Separar amplification with very low noise figure, preserving signal quality.
- Ultra-reduced ergonomic design.
Figura 1: Traseira view of the Televes 5363 Multiband Amplifier, highlighting the F-connectors for signal inputs and outputs.
2. Información de seguridade
Please read all safety instructions before installing or operating this device. Failure to follow these instructions may result in electric shock, fire, or damage to the product.
- Fonte de alimentación: Ensure the device is connected to a power outlet with the correct voltage and frequency as specified in the technical specifications.
- Ventilación: Do not block any ventilation openings. Install the device in a location with adequate airflow to prevent overheating.
- Humidade: Do not expose the device to rain, moisture, or excessive humidity. Avoid installing in damp ambientes.
- Limpeza: Disconnect the device from the power supply before cleaning. Use a dry, soft cloth. Do not use liquid cleaners or aerosol sprays.
- Servizo: Non intente atender este produto vostede mesmo. Remita todo o servizo a persoal de servizo cualificado.
- Montaxe: Ensure the device is securely mounted on a stable surface to prevent it from falling.
3. Contido do paquete
Verifica que todos os elementos estean presentes no paquete:
- Televes 5363 Multiband Ampmáis vivo
- Power cable (integrated or separate, depending on model variant)
- Manual de instrucións (este documento)
- Accesorios de montaxe (parafusos, tacos)
4. Configuración e instalación
O Televés 5363 amplifier is designed for surface mounting. Follow these steps for proper installation:
4.1. Montaxe do Ampmáis vivo
- Choose a suitable location for mounting, ensuring it is dry, well-ventilated, and easily accessible for connections.
- Mark the positions for the mounting screws on the wall or surface.
- Drill pilot holes if necessary and insert wall plugs.
- Asegure o amplificador usando os parafusos axeitados.
4.2. Connecting Signals
O amplifier features two inputs for different signal bands and an output for the mixed signal. It utilizes an EasyF connection system for reliable connections.
Figure 2: Detail of the input connections and configuration switches on the Televes 5363 ampmáis vivo.
- VHF/UHF Input: Connect your terrestrial antenna (VHF/UHF) signal cable to the designated input.
- SAT Input: Connect your satellite dish signal cable to the designated SAT input.
- Saída: Conecte a saída do amplifier to your SMATV distribution network or directly to your television/receiver.
4.3. Conexión de alimentación
Conecte o cable de alimentación ao amplifier and then to a suitable electrical outlet. The amplifier incorporates switched-mode power supplies for efficient operation.
Figura 3: Fronte view of the Televes 5363 Multiband Amplifier, showing the power input.
5. Funcionamento
O Televés 5363 amplifier is designed for straightforward operation. Once installed and powered, it will amplify and mix the incoming signals.
5.1. Signal Mixing
O amplifier automatically mixes the VHF/UHF terrestrial signals with the satellite (SAT) signals into a single output. This allows for a combined distribution of both signal types through a single cable.
5.2. Axuste da ganancia
O amplifier provides a gain of 45 dB for the satellite band and an output level of 124 dBuV. Specific gain adjustments for VHF/UHF may be available via internal potentiometers or switches, depending on the exact model variant. Refer to the markings on the device for any adjustable settings.
6. Mantemento
To ensure optimal performance and longevity of your Televes 5363 Multiband Amplifer, siga estas sinxelas pautas de mantemento:
- Limpeza: Limpar periodicamente o exterior do ampLimpe o limpador cun pano suave e seco. Non empregue produtos de limpeza abrasivos nin disolventes.
- Ventilación: Asegúrate de que as ranuras de ventilación estean libres de po e obstrucións para evitar o sobrequecemento.
- Conexións: Comprobe ocasionalmente todas as conexións dos cables para asegurarse de que estean ben fixadas e libres de corrosión.
- Ambiente: Manteña o amplifer nun ambiente seco e fresco, lonxe da luz solar directa e de temperaturas extremas.
7 Solución de problemas
If you encounter issues with your Televes 5363 Multiband Amplifier, consulte os seguintes problemas e solucións comúns:
- Sen sinal:
- Check all cable connections to ensure they are properly seated.
- Verifique que o amplifier is receiving power (check power indicator light if available).
- Ensure the input signals from the terrestrial antenna and satellite dish are present and strong enough.
- Weak or Poor Quality Signal:
- Check the quality of the input signals before they reach the ampmáis vivo.
- Ensure all connections are tight and free from damage or corrosion.
- Verifique que o amplifier's gain settings (if adjustable) are appropriate for your installation.
- Sen enerxía:
- Check the power cable connection to both the amplificador e a toma de corrente.
- Test the electrical outlet with another device to ensure it is functional.
If the problem persists after attempting these solutions, contact qualified technical support.
8. Especificacións técnicas
| Característica | Especificación |
|---|---|
| Número de modelo | 5363 |
| Fabricante | Televes |
| Material | zamak |
| Número de entradas | 2 (VHF/UHF, SAT) |
| Output Level (Vs) | 124 dBuV |
| Gain (SAT) | 45 dB |
| Rango de frecuencias | Up to 2150 MHz (FI) |
| Tipo de montaxe | Montaxe en superficie |
| Dimensións (L x W x H) | 180 x 110 x 55 mm |
| Peso do produto | 950 g |
| Fonte de alimentación | Switched-mode power supply (internal) |
| Pilas necesarias | Non |
9. Garantía e soporte
This Televes product is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Televes websitio.
For technical support, service, or inquiries regarding your Televes 5363 Multiband Amplifier, please contact your local dealer or the Televes customer service department. Contact information can typically be found on the product packaging or the official Televes websitio.
