Audio-Technica AT-LP60 Fully Automatic Belt-Drive Stereo Turntable

Introdución

The Audio-Technica AT-LP60 is a fully automatic belt-drive stereo turntable designed for playing 33-1/3 and 45 RPM records. It features a built-in switchable phono pre-amplifier, allowing direct connection to various audio systems and powered speakers. The turntable is equipped with an integral Audio-Technica Dual Magnet phono cartridge with a replaceable stylus.

Características principais:

• Fully automatic operation for 33-1/3 and 45 RPM records.
• Built-in switchable phono pre-amplifier with RCA output cables.
• Integral Audio-Technica Dual Magnet phono cartridge with replaceable diamond stylus.
• Anti-resonance die-cast aluminum platter to minimize vibration.
• Damped lift/cueing mechanism with front-panel control.
• Removable dust cover for protection.

Contido do paquete

• AT-LP60 Turntable Unit
• Funda antipolvo
• Bandexa con correa de transmisión
• Mat antideslizante
• Adaptador de 45 rpm
• Cable de audio RCA
• Adaptador de alimentación

Instrucións de configuración

1. Desembalaxe: Retire con coidado todos os compoñentes da embalaxe. Garde a embalaxe para futuros transportes ou almacenamentos.
2. Instalación do prato: Place the platter onto the turntable spindle. Ensure it sits correctly.
3. Instalación de correa: Locate the drive belt around the inner rim of the platter and stretch it over the motor pulley. Ensure the belt is flat and not twisted.
4. Slip Mat Placement: Place the felt slip mat on top of the platter.
5. Accesorio da cuberta antipo: Attach the hinged dust cover to the back of the turntable.
6. Conexión de audio: Connect the RCA audio cables from the turntable to your audio system (receiver, amplifier, or powered speakers). If your audio system has a dedicated "PHONO" input, connect directly to it. If not, ensure the turntable's built-in pre-amplifier is switched ON (located on the rear panel) and connect to a standard "LINE" input.
7. Conexión de alimentación: Connect the power adapter to the turntable and then to a wall outlet.

Image: Audio-Technica AT-LP60BK Turntable with dust cover open, showing a record on the platter. This image illustrates the turntable ready for use, with the dust cover raised and a record placed on the platter.

Instrucións de funcionamento

1. Encendido: Ensure the turntable is connected to power and your audio system is on.
2. Rexistro do lugar: Carefully place a vinyl record on the platter, centering it on the spindle. For 7-inch records, use the included 45 RPM adapter if needed.
3. Select Record Size: Use the "SIZE" selector switch (usually 12" or 7") to match the size of your record.
4. Seleccionar velocidade: Use the "SPEED" selector switch (33 or 45 RPM) to match the playback speed of your record.
5. Iniciar reprodución (automática): Preme o INICIO button. The tonearm will automatically move to the beginning of the record and lower the stylus.
6. Stop Playback (Automatic): Preme o PARA button. The tonearm will automatically lift, return to its rest, and the platter will stop spinning.
7. Manual Cueing: To manually place the stylus, use the ELEVADOR DE BRAZO TONE lever to raise the tonearm. Position the tonearm over the desired track, then lower the lever to gently drop the stylus onto the record.

Mantemento

• Funda antipolvo: Clean the dust cover gently with a soft, dry cloth. Avoid abrasive cleaners.
• Coidados do stylus: Regularly clean the stylus using a soft brush designed for stylus cleaning, brushing from back to front. Replace the stylus when sound quality degrades or after approximately 300-500 hours of use.
• Turntable Body: Wipe the turntable body with a soft, dry cloth. Do not use harsh chemicals or solvents.
• Substitución da correa: The drive belt may need replacement after extended use. Refer to the full manual for specific instructions on belt replacement.

Resolución de problemas

• Sen enerxía: Ensure the power adapter is securely connected to both the turntable and a working electrical outlet.
• Sen son ou son baixo:
  • Check all audio cable connections between the turntable and your audio system.
  • Verify the PHONO/LINE switch on the turntable's rear panel is set correctly for your audio system's input.
  • Ensure your audio system's input selector is set to the correct input.
  • Comprobe o nivel de volume do seu sistema de son.
• Saltos ou son distorsionado:
  • Clean the record thoroughly.
  • Check the stylus for dirt or damage; clean or replace if necessary.
  • Ensure the turntable is placed on a stable, level surface.
• O prato non xira:
  • Check if the drive belt is properly seated around the platter and motor pulley.
  • Ensure the power is connected and the turntable is switched on.

Especificacións

Garantía e Soporte

The Audio-Technica AT-LP60 turntable comes with a 1 ano de garantía desde a data de compra. Conserve o comprobante de compra para reclamacións de garantía.

For technical support, troubleshooting assistance, or warranty service, please contact Audio-Technica customer support through their official websitio web ou a información de contacto que se inclúe na embalaxe do produto.

You can also visit the official Audio-Technica website for FAQs, additional resources, and product registration.