Laica BM2005W

Laica BM2005W Automatic Arm Blood Pressure Monitor

Manual de usuario

1. Introdución

This manual provides essential instructions for the safe and effective use of your Laica BM2005W Automatic Arm Blood Pressure Monitor. Please read this manual thoroughly before using the device and keep it for future reference. This device is designed for non-invasive measurement and monitoring of arterial blood pressure and heart rate in adults.

2. Información importante de seguridade

  • Consulte co seu médico antes de usar este dispositivo se ten algunha condición médica.
  • Non se autodiagnostique nin se automedique baseándose nos resultados das medicións. Consulte sempre cun profesional sanitario.
  • Este dispositivo está pensado só para uso adulto.
  • Manteña o dispositivo fóra do alcance dos nenos e das mascotas.
  • Non empregues o dispositivo nun vehículo en movemento.
  • Avoid strong electromagnetic fields (e.g., mobile phones, microwave ovens) near the device during use.
  • Use só accesorios e pezas de recambio aprobados.

3. Produto rematadoview

The Laica BM2005W is an automatic arm blood pressure monitor utilizing oscillometric technology for accurate and reliable measurements. It features a large LCD display and stores up to 120 measurements.

Laica BM2005W Blood Pressure Monitor with arm cuff and display

Figure 1: Laica BM2005W Automatic Arm Blood Pressure Monitor. This image shows the main unit with its large LCD display, control buttons, and the attached arm cuff.

Compoñentes:

  • Main Unit (with LCD display and control buttons)
  • Brazalete
  • Manual de instrucións
  • Storage Bag (if included)
  • Pilas (se están incluídas)

4. Configuración

4.1. Instalación da batería

  1. Abra a tapa do compartimento das baterías na parte traseira da unidade principal.
  2. Insert four (4) AA alkaline batteries, ensuring the correct polarity (+/-) as indicated inside the compartment.
  3. Pecha a tapa do compartimento da batería de forma segura.

4.2. Conexión do manguito

  1. Connect the air tube from the arm cuff to the air jack on the side of the main unit. Ensure a secure connection.
  2. The cuff should fit comfortably around your upper arm. Refer to the cuff size guide if available.

5. Instrucións de funcionamento

5.1. Preparación para a medición

  • Evite comer, beber alcol, fumar ou facer exercicio durante polo menos 30 minutos antes da medición.
  • Rest for 5-10 minutes in a quiet environment before taking a measurement.
  • Senta-te erguido coas costas apoiadas e os pés apoiados no chan. Non cruces as pernas.
  • Place your arm on a flat surface so the cuff is at heart level.
  • Ensure clothing does not constrict your arm. Roll up sleeves if necessary.
  • Wrap the cuff firmly around your bare upper arm, approximately 2-3 cm above the elbow joint. The air tube should run down the center of your arm.

5.2. Facer unha medida

  1. Press the "START/STOP" button to turn on the device. The display will show all symbols briefly, then "00".
  2. The cuff will automatically inflate. Remain still and silent during inflation and measurement.
  3. Once the measurement is complete, the cuff will deflate, and your systolic pressure, diastolic pressure, and pulse rate will be displayed on the LCD screen.
  4. Press the "START/STOP" button again to turn off the device, or it will automatically shut off after approximately one minute of inactivity.

5.3. Función de memoria

The device stores up to 120 measurements. To view lecturas pasadas:

  1. With the device off, press the "MEM" button.
  2. A medición máis recente mostrarase primeiro.
  3. Press the "MEM" button repeatedly to scroll through older measurements.
  4. To exit memory mode, press the "START/STOP" button or wait for automatic shut-off.

6. Mantemento

6.1. Limpeza

  • Limpar a unidade principal e o manguito cun pano suave e seco.
  • Se é necesario, use un pano lixeiramente humedecidoamplimpa con auga ou un deterxente suave. Non empregue produtos de limpeza abrasivos nin mergulle o dispositivo en auga.

6.2. Almacenamento

  • Garde o dispositivo nun lugar fresco e seco, lonxe da luz solar directa e de temperaturas extremas.
  • Se o dispositivo non se vai usar durante un período prolongado, retire as baterías para evitar fugas.

7 Solución de problemas

ProblemaCausa posibleSolución
O dispositivo non se acende.As pilas están gastadas ou inseridas incorrectamente.Substitúa as pilas ou comprobe a polaridade.
Error message (e.g., "Err").Cuff not properly applied, movement during measurement, or air leakage.Re-apply cuff, remain still, check cuff connection. Try again after a few minutes.
Lecturas inconsistentes.Improper measurement technique, stress, or environmental factors.Ensure proper preparation and technique (refer to Section 5.1). Take multiple readings over time.

8. Especificacións

  • Modelo: Laica BM2005W
  • Método de medición: Oscilométrico
  • Fonte de enerxía: Alimentado por batería
  • Memoria: 120 medidas
  • Característica especial: Pantalla LCD
  • GTIN: 08033224601663
  • Grupo de idade previsto: Adulto
  • Fabricante: Laica

9. Garantía e soporte

For information regarding warranty terms and conditions, please refer to the warranty card included with your product or visit the official Laica website. For technical support or service inquiries, please contact Laica customer service through their official channels.

Note: Specific warranty details may vary by region and retailer. Keep your proof of purchase.

© 2023 Laica. Todos os dereitos reservados.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.