Philips 17W 24in T8 Bright White Fluorescent Tube User Manual

Introdución

This manual provides essential information for the safe and effective use of your Philips 17W 24in T8 Bright White Fluorescent Tube, Model 280909. Please read these instructions carefully before installation and retain them for future reference.

Información de seguridade

Risco eléctrico: Always disconnect power to the fixture before installing, removing, or servicing the fluorescent tube. Failure to do so may result in electric shock or injury.
Fragile Item: Fluorescent tubes are made of glass and can break. Handle with care to prevent injury.
Contido de mercurio: This product contains mercury. Dispose of in accordance with local, state, and federal laws. Visit www.epa.gov/mercury para máis información.
Compatibilidade: Ensure the fluorescent tube is compatible with your fixture's ballast and socket type (G13 Medium Bi-Pin).
Só para uso en interiores: Esta lámpada está deseñada para aplicacións en interiores.

Produto rematadoview

The Philips 17W 24in T8 Bright White Fluorescent Tube is designed to provide efficient and bright illumination. It features a T8 bulb shape and a G13 (Medium Bi-Pin) base for standard fluorescent fixtures.

Figure 1: Philips 17W 24in T8 Bright White Fluorescent Tube. This image shows the cylindrical glass tube with bi-pin connectors at each end.

Especificacións

Característica	Detalle
Marca	Philips
Número de modelo	280909
Wattage	17 vatios
Tamaño da forma do bulbo	T8
Base de bulbo	G13 (Medium Bi-Pin)
Cor clara	Branco brillante
Temperatura da cor	5000 Kelvin
Brillo	1300 lúmenes
Índice de reproducción da cor (CRI)	82
Voltage	240 voltios (CA)
Lonxitude	24 polgadas
Diámetro	1 polgadas
Vida estimada	24,000 horas (aprox. 22.2 anos baseados en 3 horas/día)
Uso interior/exterior	Interior

Configuración e instalación

Desconexión de alimentación: Before beginning installation, ensure the power supply to the fluorescent light fixture is completely turned off at the circuit breaker or fuse box.
Retirar o tubo antigo (se corresponde): If replacing an existing tube, carefully twist the old tube approximately 90 degrees and gently pull it out of the sockets. Dispose of the old tube properly according to local regulations.
Inspeccionar o dispositivo de fixación: Check the fixture's sockets and wiring for any damage. Ensure the ballast is compatible with T8 fluorescent tubes.
Instalar tubo novo: Align the two pins at each end of the Philips T8 fluorescent tube with the slots in the fixture's sockets. Gently push the tube into the sockets until it is fully seated, then twist it approximately 90 degrees until it locks into place. Do not force the tube.
Restaurar enerxía: Once the tube is securely installed, restore power to the fixture from the circuit breaker.
Proba: Acenda o interruptor da luz para confirmar o funcionamento correcto.

If the tube does not light, ensure it is properly seated and twisted into the sockets. If issues persist, refer to the Troubleshooting section.

Instrucións de funcionamento

Operating the Philips T8 fluorescent tube is straightforward. Once installed in a compatible fixture with power restored, simply use the fixture's wall switch or integrated switch to turn the light on and off.

Activación instantánea: This fluorescent tube is designed for quick illumination.
Rendemento óptimo: For optimal performance and lifespan, avoid frequent on/off cycling.

Mantemento

Limpeza: To clean the fluorescent tube, ensure the power is off and the tube is cool. Gently wipe the tube with a soft, dry, lint-free cloth. Do not use liquid cleaners or abrasive materials, as these can damage the tube.
Substitución: Replace the tube when it reaches the end of its life (indicated by flickering, dimming, or failure to light). Follow the installation instructions in reverse to remove the old tube and install a new one.
Mantemento de accesorios: Periodically inspect the light fixture for dust accumulation, loose wiring, or damaged sockets. Clean the fixture as needed.

Resolución de problemas

Problema	Causa posible	Solución
Tube does not light	Sen enerxía para fixar Tube not properly seated Faulty tube Faulty ballast or starter (if applicable)	Comprobar o interruptor/fusible. Ensure tube is twisted and locked into sockets. Replace tube with a new one. Consult a qualified electrician to inspect/replace ballast/starter.
Tube flickers	Tubo preto do final da súa vida útil Conexión solta Incorrect ballast	Replace tube. Ensure tube is securely seated. Verify ballast compatibility.
Diminución de saída de luz	Tubo preto do final da súa vida útil Dust/dirt on tube or fixture	Replace tube. Clean tube and fixture.

Información de eliminación

This fluorescent tube contains a small amount of mercury. It is important to dispose of it responsibly to protect the environment. Do not dispose of fluorescent tubes in regular household trash.

Reciclaxe: Many communities offer recycling programs for fluorescent bulbs. Check with your local waste management authority for recycling options in your area.
Hazardous Waste Facilities: Some areas require fluorescent bulbs to be taken to special household hazardous waste collection sites.
For more information on mercury-containing products and disposal, please visit the U.S. Environmental Protection Agency (EPA) websitio: www.epa.gov/mercury.

Garantía e Soporte

For warranty information and customer support regarding your Philips fluorescent tube, please refer to the documentation provided with your purchase or visit the official Philips lighting website. Philips products are designed for quality and reliability.

Contact Philips: For technical assistance or product inquiries, please visit www.lighting.philips.com or refer to the contact information provided on the product packaging.

Philips 280909