1. Introdución
This manual provides essential information for the safe and effective use of your TONE RH2H 1/4-inch drive ratchet handle. The TONE RH2H is engineered for precision and durability, featuring a compact design and a 72-tooth gear mechanism for a fine 5-degree feed angle. Its integrated socket hold mechanism ensures secure attachment of sockets during operation.
2. Información de seguridade
- Usar sempre o equipo de protección individual axeitado, como lentes de seguridade, cando se utilicen ferramentas manuais.
- Ensure the correct size socket is used for the fastener to prevent damage to the fastener or tool.
- Non empregue o mango da chave de trinquete se está danado ou parece que non funciona correctamente.
- Avoid applying excessive force beyond the tool's intended capacity, as this can lead to breakage or injury.
- Manteña as mans e os dedos lonxe das pezas móbiles durante o funcionamento.
- Store the tool in a clean, dry place away from children.
3. Características do produto
- Tamaño da unidade: 1/4 inch (6.35 mm) square drive.
- Mecanismo de engrenaxes: 72 teeth for a fine 5-degree feed angle, allowing for precise adjustments in confined spaces.
- Socket Hold Type: Features a secure socket retention mechanism to prevent accidental detachment.
- Deseño compacto: Optimized for maneuverability and functionality, with a sleek and streamlined form.
- Construción duradeira: Made from metal with a brushed finish for longevity and comfortable grip.
4. Especificacións
| Especificación | Valor |
|---|---|
| Marca | TONO |
| Número de modelo | RH2H |
| Tamaño da unidade | 1/4 de polgada (6.35 mm) |
| Lonxitude total | 145 mm (5.7 polgadas) |
| Anchura | 19.3 mm (0.7 polgadas) |
| Espesor | 20 mm (0.8 polgadas) |
| Peso | 80 g (2.82 onzas) |
| Número de dentes | 72 |
| Feed Angle | 5 graos |
| Material | Metal |
| Tipo de acabado | Cepillado |
| Estilo de cabeza | Redondo |
| Modo de operación | Mecánica |
Note: All dimensions are approximate and subject to manufacturing tolerances.
5. Configuración
Attaching a Socket
- Select the appropriate 1/4-inch drive socket for your application.
- Align the square drive opening of the socket with the square drive on the ratchet head.
- Press the socket firmly onto the ratchet drive. The socket hold mechanism will engage, securing the socket in place.
Removing a Socket
- To release the socket, press the button on the center of the ratchet head.
- While holding the button, pull the socket straight off the drive.
6. Instrucións de funcionamento
Selección de dirección
The ratchet handle features a lever on the head to select the direction of rotation (clockwise or counter-clockwise). Move the lever to the desired position for tightening or loosening fasteners.
Aplicando Torque
Once the socket is securely attached and the direction is set, place the socket onto the fastener. Apply steady, controlled force to the handle to turn the fastener. The 72-tooth mechanism allows for small, precise turns with a 5-degree feed angle, which is beneficial in tight spaces.
7. Mantemento
- Limpeza: After each use, wipe the ratchet handle clean with a dry cloth to remove dirt, grease, and debris. For stubborn grime, use a mild degreaser and ensure the tool is thoroughly dried afterward.
- Lubricación: Periodically apply a small amount of light machine oil to the ratchet head mechanism to ensure smooth operation and prevent corrosion. Avoid over-lubricating, as this can attract dirt.
- Inspección: Regularly inspect the ratchet for any signs of wear, damage, or loose components. Pay close attention to the drive square, gear mechanism, and direction lever.
- Almacenamento: Store the ratchet handle in a clean, dry environment to prevent rust and damage.
8 Solución de problemas
- Stiff Ratchet Mechanism: If the ratchet mechanism feels stiff or rough, it may require cleaning and lubrication. Refer to the Maintenance section.
- Socket Not Holding: Ensure the socket is fully seated and the release button is not stuck. If the mechanism is worn, the tool may need professional servicing or replacement.
- Direction Lever Stiff: Clean any debris around the lever and apply a small amount of lubricant.
For issues not resolved by these steps, contact TONE customer support or a qualified tool technician.
9. Información da garantía
TONE products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty documentation included with your purchase or visit the official TONE websitio. A cobertura da garantía adoita cubrir defectos de fabricación en condicións de uso normal.
10. Apoio
For further assistance, technical support, or inquiries regarding your TONE RH2H ratchet handle, please contact TONE customer service through their official websitio web ou o vendedor ao que se lle comprou o produto.
