BST ACTIV218 DJ Mixer Instruction Manual

1. Introdución

Grazas pola compraasing the BST ACTIV218 DJ Mixer. This 6-channel mixer is designed for professional and enthusiast DJs, offering a versatile range of inputs including line, phono, USB, and microphone, along with an integrated SD card reader. To ensure optimal performance and longevity of your device, please read this manual thoroughly before operation and retain it for future reference.

2. Instrucións de seguridade

Fonte de alimentación: Ensure the mixer is connected to a power source with the correct voltage as indicated on the unit. Always use the provided power cable.
Ventilación: Non bloquee as aberturas de ventilación. Asegúrese de que haxa un fluxo de aire axeitado arredor da unidade para evitar o sobrequecemento.
Humidade: Keep the mixer away from water, rain, and excessive humidity. Do not operate with wet hands.
Limpeza: Disconnect the power before cleaning. Use a dry, soft cloth. Do not use liquid cleaners or aerosols.
Servizo: Non intente realizar o mantemento desta unidade vostede mesmo. Encomende calquera mantemento a persoal de servizo cualificado.
Colocación: Coloque a unidade sobre unha superficie estable e plana. Evite colocala preto de fontes de calor ou baixo a luz solar directa.
Substitución de fusibles: Refer to the rear panel for fuse specifications. Replace fuses only with the same type and rating to reduce the risk of fire.

3. Produto rematadoview

3.1 Controis do panel frontal

Imaxe: Fronte view of the BST ACTIV218 DJ Mixer, showing all controls and inputs.

The front panel provides access to all primary mixing controls:

MIC 1-4 Inputs: XLR inputs for microphones.
Channel Strips (CH1-CH5): Each channel features GAIN, HIGH, MID, BASS (EQ), CUE, and Volume Faders.
USB/SD Player: Controls for playback from USB drives and SD cards, including display, play/pause, track navigation, and mode selection.
Crossfader: A/B crossfader for smooth transitions between assigned channels.
Saída principal: Controla o volume de saída global.
Saída do teléfono: Headphone output with volume control and CUE/Master blend.
Discutir: Función de prioridade do micrófono.
Equalizer: Global equalizer for the main output.

3.2 Conexións do panel traseiro

Imaxe: Traseira view of the BST ACTIV218 DJ Mixer, showing all input and output connections.

O panel traseiro alberga todas as conexións de entrada e saída:

Entrada de enerxía: AC power connection with voltage selector (115V/230V) and fuse holder.
AMP Saída: Saída de audio principal a un amplifier ou altofalantes alimentados.
ZONE Output: Secondary audio output for a separate listening zone.
Saída REC: Output for connecting to a recording device.
EFFECT Send/Receive: Connections for external effects units.
LINE Inputs (7x): RCA inputs for CD players, media players, or other line-level devices.
PHONO Inputs (2x): RCA inputs for turntables.

4. Configuración

Desembalaxe: Carefully remove the mixer from its packaging. Inspect for any signs of damage.
Colocación: Coloque a batedora sobre unha superficie estable e plana, garantindo unha ventilación axeitada arredor da unidade.
Conexión de alimentación: Antes de conectar o cable de alimentación, asegúrese do volumetage selector on the rear panel matches your local power supply (115V or 230V). Connect the power cable to the mixer and then to a suitable power outlet.
Conexións de entrada de audio:
- Connect turntables to the PHONO inputs (LINE 1, LINE 2).
- Connect CD players, media players, or other line-level devices to the LINE inputs (LINE 3-7).
- Insert microphones into the MIC 1-4 XLR inputs on the front panel.
- For USB playback, insert a USB drive into the front panel USB port.
- For SD card playback, insert an SD card into the front panel SD slot.
Conexións de saída de audio:
- Conecta o AMP output to your main amplifier ou altofalantes alimentados.
- If using a separate zone, connect the ZONE output to the respective amplifier/altofalantes.
- Connect a recording device to the REC output if desired.
Auriculares: Plug your headphones into the PHONE jack on the front panel.

5. Instrucións de funcionamento

Encendido: Ensure all connections are secure, then press the POWER button on the front panel.
Selección de entrada: For each channel, use the input selector switch to choose between the connected sources (e.g., PHONO, LINE, USB).
Axuste de ganancia: Adjust the GAIN knob for each active channel to achieve an optimal input level. The level meters can assist in preventing clipping (distortion).
Ecualización (EQ): Use the HIGH, MID, and BASS knobs on each channel to adjust the frequency response of the individual audio source.
Volume da canle: Use the channel faders to control the volume of each input.
Crossfader: Assign channels to the A or B side of the crossfader using the A/B assign switches. Move the crossfader to blend between the assigned channels.
Headphone Monitoring (CUE): Press the CUE button on any channel to send its audio to your headphones. Adjust the PHONE volume and CUE/Master blend to monitor your mix.
USB/SD Player: Insert a USB drive or SD card. Use the MODE button to select the source. Use the play/pause, stop, and track navigation buttons to control playback.
Uso do micrófono: Connect a microphone to one of the MIC inputs. Adjust the MIC GAIN and EQ (HIGH, MID, BASS) for the microphone channel. Use the TALKOVER switch to automatically lower music volume when speaking into the microphone.
Saída principal: Adjust the MASTER volume knob to control the overall output level to your amplifier/speakers. Monitor the master level meters to avoid distortion.
Global Equalizer: Use the EQUALIZER knobs to fine-tune the overall sound of your mix.

6. Mantemento

Limpeza: Limpa regularmente a superficie da batedora cun pano suave, seco e sen pelusa. Evita o uso de produtos de limpeza abrasivos ou solventes.
Faders e botóns: Keep faders and knobs free from dust and debris. Do not force controls.
Almacenamento: When not in use for extended periods, store the mixer in a dry, dust-free environment. Consider using a dust cover.
Substitución de fusibles: If the unit does not power on, check the fuse located in the power input section on the rear panel. Replace only with a fuse of the exact same type and rating (e.g., FUSE 5x20mm 250V). Refer to the markings on the unit for specific fuse values.

7 Solución de problemas

Sen enerxía:
- Check if the power cable is securely connected to both the mixer and the power outlet.
- Verifique que a toma de corrente funcione.
- Check the fuse on the rear panel and replace if blown (see Maintenance section).
Sen saída de son:
- Ensure the MASTER volume knob is turned up.
- Comproba que o teu amplifier/powered speakers are turned on and connected correctly.
- Verify that individual channel faders are up and GAIN knobs are adjusted.
- Confirm the correct input source is selected for each channel.
Son distorsionado:
- Reduce the GAIN for the input channel.
- Baixa o volume PRINCIPAL.
- Check input cables for damage or improper connection.
USB/SD Player Not Working:
- Ensure the USB drive or SD card is properly inserted.
- Verifica o file format is supported (typically MP3, WAV).
- Proba cunha unidade USB ou tarxeta SD diferente.

8. Especificacións

Modelo: ACTIVIDADE 218
Marca: BST
Número de canles: 6
Entradas: 7x Line (RCA), 2x Phono (RCA), 4x Microphone (XLR), 1x USB, 1x SD
Saídas: AMP (RCA), ZONE (RCA), REC (RCA), Effect Send/Receive (RCA), Headphone (6.35mm Jack)
Interface de hardware: Bluetooth (as per specification, though primary connectivity is USB/RCA)
Tecnoloxía de conectividade: USB
Tipo de fonte de alimentación: Alimentado por rede
Dimensións do produto: 43.8 x 17.8 x 10.4 cm
Peso do artigo: 5.2 kg (11.46 libras)
Cor: Negro

9. Garantía e soporte

Warranty information for the BST ACTIV218 DJ Mixer is typically provided by the retailer at the time of purchase or can be found on the manufacturer's official website. Please retain your proof of purchase for any warranty claims. For technical support or service inquiries, contact your authorized BST dealer or the manufacturer's customer service department.

BST ACTIV218