Puig 6789W

Puig 6789W Traffic Windscreen Instruction Manual for Honda Wave 12-13

Modelo: 6789W

1. Introdución

This manual provides detailed instructions for the proper installation, operation, and maintenance of your Puig 6789W Traffic Windscreen. This windscreen is specifically designed for Honda Wave models manufactured between 2012 and 2013. Please read this manual thoroughly before beginning installation to ensure correct assembly and safe use of the product.

2. Información de seguridade

Always prioritize safety when working on your motorcycle. Failure to follow these safety guidelines may result in injury or damage to the product or motorcycle.

  • Ensure the motorcycle is stable and on a level surface before starting installation.
  • Usar equipos de protección individual axeitados, como luvas e protección ocular.
  • Do not overtighten fasteners, as this can strip threads or crack components. Refer to torque specifications if available.
  • Regularly inspect the windscreen and mounting hardware for any signs of wear, damage, or looseness.
  • Se tes algunha dúbida sobre algún paso do proceso de instalación, consulta cun mecánico de motocicletas cualificado.

3. Contido do paquete

Verifique que todos os compoñentes estean presentes e estean intactos antes de continuar coa instalación. Se falta algunha peza ou está danada, póñase en contacto co seu vendedor.

  • 1x Puig 6789W Traffic Windscreen (Transparent)
  • 1x Mounting Hardware Kit (brackets, bolts, washers, nuts)
  • 1x Manual de instrucións (este documento)
Image showing the Puig 6789W Traffic Windscreen and its associated mounting hardware.

Figure 1: The Puig 6789W Traffic Windscreen and its components.

4. Configuración e instalación

This section details the step-by-step process for installing the Puig 6789W Traffic Windscreen on your Honda Wave (2012-2013).

4.1. Ferramentas necesarias

  • Conxunto de chaves hexagonales
  • Set de chaves inglesas
  • Screwdriver (Phillips or flathead, as required)
  • Pano suave para limpeza

4.2. Pasos da instalación

  1. Preparar a motocicleta: Park the Honda Wave on a stable, level surface. Turn off the engine and remove the key.
  2. Identificar os puntos de montaxe: Locate the designated mounting points on your Honda Wave's handlebars or front fairing. These are typically existing bolt holes.
  3. Montar os soportes: Attach the provided mounting brackets to the windscreen using the smaller bolts and washers. Do not fully tighten yet.
  4. Fixar á motocicleta: Carefully position the windscreen assembly onto the motorcycle's mounting points. Use the larger bolts, washers, and nuts to secure the brackets to the motorcycle. Hand-tighten all fasteners initially.
  5. Axustar posición: Adjust the windscreen's angle and height to your preferred riding position. Ensure it does not obstruct your view or interfere with steering.
  6. Apertura final: Once the desired position is achieved, progressively tighten all bolts and nuts. Ensure they are secure but do not overtighten. Double-check all connections.

5. En funcionamento

Once installed, the Puig 6789W Traffic Windscreen operates passively by deflecting wind and debris. No active operation is required. Before each ride, perform a quick visual inspection to ensure the windscreen is securely attached and free from damage.

6. Mantemento

Proper maintenance will extend the life and clarity of your windscreen.

  • Limpeza: Clean the windscreen regularly with a soft cloth and mild soap and water. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the plastic material. Rinse thoroughly and dry with a clean, soft cloth.
  • Inspección: Periodically check all mounting bolts and nuts for tightness. Vibrations from riding can cause fasteners to loosen over time. Inspect the windscreen for cracks, scratches, or other damage.
  • Almacenamento: If storing the motorcycle for an extended period, consider covering the windscreen to protect it from dust and UV exposure.

7 Solución de problemas

Esta sección aborda problemas comúns cos que podes atoparte.

ProblemaCausa posibleSolución
Windscreen vibrates excessivelyLoose mounting bolts; incorrect installation.Check and tighten all mounting bolts. Re-evaluate installation steps.
Reduced visibility through windscreenDirt, scratches, or improper cleaning.Clean the windscreen with mild soap and water. Avoid abrasive materials. If scratched, consider replacement.
Windscreen feels loose after ridingFasteners have loosened due to vibration.Regularly inspect and tighten all mounting hardware.

8. Especificacións

CaracterísticaDetalle
Número de modelo6789 W
Marcapuig
CompatibilidadeHonda Wave (2012-2013)
CorTransparent / Klar
MaterialPlástico
Tipo de instalaciónVehicle-specific fit, Self-adhesive
Dimensións do paquete36 x 31 x 16 cm
Peso do elemento500 gramos

9. Garantía e soporte

Puig products are manufactured to high standards. For information regarding warranty coverage, claims, or technical support, please refer to the official Puig website or contact your authorized Puig dealer. Keep your proof of purchase for warranty purposes.

Fabricante: puig

Websitio: www.puig.tv

© 2023 Puig. Todos os dereitos reservados. Este manual é só para fins informativos.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.