Lutron Maestro Occupancy/Vacancy Sensor Switch (MS-OPS6M2N-DV-WH) Instruction Manual

1. Produto rematadoview

The Lutron Maestro MS-OPS6M2N-DV-WH is an advanced occupancy/vacancy sensor switch designed to automatically control lighting in a room. This device utilizes passive infrared (PIR) technology to detect human motion and presence, ensuring lights are only on when needed. It combines the functionality of a standard light switch with an integrated motion sensor, offering convenience and energy savings.

Características principais:

• Passive infrared motion detection with Lutron XCT technology for fine motion sensing.
• 180-degree sensor field-of-view para unha cobertura completa da sala.
• Requires a neutral wire for installation.
• Occupancy version supports both auto-on/auto-off and manual-on/auto-off modes.
• Vacancy version is available to comply with CA Title 24 requirements.

Figura 1: Fronte view of the Lutron Maestro MS-OPS6M2N-DV-WH sensor switch.

2. Configuración e instalación

Información importante de seguridade: Before beginning installation, turn off power at the circuit breaker or fuse box. Incorrect installation can lead to electrical shock or fire. If you are unsure about any part of these instructions, consult a qualified electrician.

Ferramentas necesarias: Screwdriver (Phillips and flathead), wire strippers, electrical tape.

2.1 Instrucións de cableado

1. Apagar a enerxía: Localiza o disxuntor que controla o interruptor que estás a substituír e desconéctao. Verifica que a alimentación estea cortada usando un volímetro.tagprobador.
2. Eliminar o interruptor existente: Retira con coidado a placa de parede e desenrosca o interruptor existente da caixa de parede. Desconecta os cables do interruptor antigo.
3. Identificar os cables:
   • Hot (Line) Wire: Typically black, brings power from the circuit breaker.
   • Cable de carga: Typically black, connects to the light fixture.
   • Fío neutro: Typically white, required for this switch.
   • Fío de terra: Normalmente cobre espido ou verde.

   Note: If you are replacing a 3-way switch, you will also have traveler wires. This model supports 3-way circuits. Refer to the detailed wiring diagram for 3-way installations.

4. Connect Wires to Maestro Switch:
   • Conecta o cable de terra from the wall box to the green ground wire on the Maestro switch.
   • Conecta o cable neutro from the wall box to the white neutral wire on the Maestro switch.
   • Conecta o hot (line) wire e cable de carga from the wall box to the two black wires on the Maestro switch. If the light does not function correctly, swap these two black wires.
   • For 3-way applications, connect the traveler wires as per the specific 3-way wiring diagram provided with the product packaging.
5. Secure Switch: Carefully push the wired switch into the wall box, ensuring wires are not pinched. Screw the switch into place.
6. Instalar placa de parede: Fixe a placa decorativa de parede.
7. Restaurar enerxía: Volva a conectar a corrente no disyuntor.

Figura 2: Example wiring diagram for a single-pole installation. Consult the included manual for 3-way wiring.

3. Instrucións de funcionamento

The Maestro sensor switch offers flexible operation modes to suit various needs.

3.1 Modos de funcionamento

• Occupancy Mode (Auto-On/Auto-Off): In this mode, the lights automatically turn ON when motion is detected and automatically turn OFF after a set time delay when no motion is detected. This is ideal for high-traffic areas where hands-free operation is desired.
• Vacancy Mode (Manual-On/Auto-Off): In this mode, the lights must be manually turned ON by pressing the switch button. They will then automatically turn OFF after a set time delay when no motion is detected. This mode is often used to meet energy codes and provides more control over when lights are initially activated.

3.2 Axustar a configuración

The Maestro sensor switch typically has small buttons or dip switches behind the wall plate for adjusting settings such as:

• Retraso de tempo: How long the lights remain on after the last detected motion (e.g., 1, 5, 15, 30 minutes).
• Sensibilidade: The level of motion required to trigger the sensor.
• Modo de funcionamento: Switching between Occupancy (Auto-On) and Vacancy (Manual-On) modes.

Refer to the detailed instructions included with your product for specific steps on how to access and adjust these settings.

4. Mantemento

The Lutron Maestro sensor switch requires minimal maintenance to ensure optimal performance.

• Limpeza: To clean the surface of the switch, use a soft, damp pano. Non empregue produtos de limpeza abrasivos, solventes nin produtos químicos agresivos, xa que poden danar o acabado ou os compoñentes internos.
• Obstrución do sensor: Ensure the sensor lens is not obstructed by furniture, curtains, or other objects that could block its field of view. A clear path to the sensor is crucial for accurate motion detection.
• Acumulación de po: Periodically wipe the sensor lens to prevent dust accumulation, which can reduce sensitivity.

5 Solución de problemas

If you encounter issues with your Maestro sensor switch, refer to the following common troubleshooting steps:

• Lights do not turn ON automatically (Occupancy Mode):
  • Verify the sensor's field of view non está obstruída.
  • Check the sensitivity setting; it might be too low.
  • Ensure the switch is in Occupancy (Auto-On) mode.
  • Confirm power is supplied to the switch.
• Lights do not turn OFF:
  • Ensure there is no continuous motion within the sensor's range.
  • Check the time delay setting; it might be set too long.
  • Verify the switch is correctly wired, especially the load wire.
• As luces parpadean ou se comportan de xeito errático:
  • Confirm that a neutral wire is properly connected. This switch requires a neutral wire for stable operation.
  • Asegúrese de que todas as conexións dos cables estean seguras.
  • If in a 3-way setup, ensure compatible companion switches are used and wired correctly.
• O interruptor non responde:
  • Turn off power at the circuit breaker for 15 seconds, then restore power. This can reset the switch.
  • Comprobe se todas as conexións do cableado están soltas ou colocadas incorrectamente.

If these steps do not resolve the issue, contact Lutron customer support for further assistance.

6. Especificacións

7. Vídeos de produtos

8. Información da garantía

Lutron products typically come with a limited warranty covering defects in materials and workmanship. For specific warranty terms and conditions applicable to your MS-OPS6M2N-DV-WH sensor switch, please refer to the warranty card included in the product packaging or visit the official Lutron websitio. Garda o comprobante de compra para reclamacións de garantía.

9. Atención ao cliente

For technical assistance, troubleshooting, or product inquiries, please contact Lutron customer support. You can find contact information on the official Lutron websitio web ou dentro da documentación do produto.

Recursos en liña:

• Visita o oficial Tenda Lutron en Amazon para máis produtos e información.
• Refer to the comprehensive FAQs and support documents available on the Lutron corporate websitio.