Introdución
The AKG WMS420 Presenter Set is a professional multi-channel wireless microphone system designed for clear audio transmission. It features pilot tone technology to prevent unwanted noise and offers a flexible solution for various applications, from stage performances to installations. This system includes a stationary receiver, a body-pack transmitter, and a lavalier microphone, supporting rechargeable batteries for cost-effective operation.
Contido do paquete
Verify that all components are present in your AKG WMS420 Presenter Set package:
- SR 420 Stationary Receiver
- PT 420 Body-Pack Transmitter
- C417 L Lavalier Microphone
- Fuente de alimentación para receptor
- AA Battery (for transmitter)
- Detachable Receiver Antennas
Características clave
- Detachable Receiver Antennas: Allows for the use of professional RF accessories such as antenna splitters and remote-mounted directional antennas.
- Professional C417 L Lavalier Microphone: Included for high-quality vocal capture.
- Transmitters with Charging Contacts: Designed to support rechargeable batteries, reducing operational costs and environmental impact.
- Compatibilidade: Works with all AKG Micromics for broad application use.
- Low Battery Warning Indicator: Provides visual notification for secure and uninterrupted operation.
- Pilot Tone Transmission: Prevents unwanted noise and ensures stable signal quality.
Configuración
1. SR 420 Stationary Receiver Setup
- Posicionamento: Place the receiver on a stable, flat surface, away from large metal objects or other wireless devices that may cause interference.
- Conectar antenas: Screw the two detachable antennas onto the ANTENNA A and ANTENNA B connectors on the rear of the SR 420 receiver. Ensure they are securely tightened and positioned for optimal reception.
- Conectar a saída de audio: Connect the AUDIO OUT (XLR balanced or 1/4" unbalanced) of the receiver to the input of your mixer or PA system using an appropriate audio cable.
- Conectar enerxía: Plug the provided power supply into the DC IN 12V 500mA jack on the receiver and then into a suitable power outlet. Do not power on yet.
Imaxe: Fronte view of the AKG SR 420 Stationary Receiver, showing the ON/OFF button, VOLUME knob, channel display, RF OK indicator, and CLIP indicator.
Imaxe: Traseira view of the AKG SR 420 Stationary Receiver, showing ANTENNA A and B connectors, SQUELCH control, BALANCED XLR output, UNBALANCED 1/4" output, and DC IN power jack.
2. PT 420 Body-Pack Transmitter Setup
- Instalar batería: Open the battery compartment of the PT 420 body-pack transmitter. Insert the supplied AA battery, observing the correct polarity (+/-). Close the compartment securely.
- Connect Lavalier Microphone: Plug the C417 L lavalier microphone into the mini-XLR input on the top of the PT 420 body-pack transmitter. Ensure it clicks into place.
- Secure Transmitter: Attach the body-pack transmitter to your belt or clothing using the integrated clip. Position the lavalier microphone approximately 6-12 inches from your mouth for optimal sound capture.
Imaxe: Fronte view of the AKG PT 420 Body-Pack Transmitter, showing the channel display and battery status indicator.
Imaxe: Arriba view of the AKG PT 420 Body-Pack Transmitter, showing the mini-XLR input for the microphone and the antenna.
Image: Close-up of the AKG C417 L Lavalier Microphone.
Instrucións de funcionamento
- Encender o receptor: Press the ON/OFF button on the SR 420 receiver. The display should illuminate.
- Transmisor de acendido: Press and hold the ON/OFF button on the PT 420 body-pack transmitter until the indicator light illuminates.
- Seleccione o canal: On the SR 420 receiver, use the CHANNEL buttons to select a clear operating frequency. The RF OK indicator should light up green, indicating a stable connection with the transmitter. On the PT 420 transmitter, ensure its channel matches the receiver's channel. Refer to the frequency band information (Band U2: 614.100 - 629.300 MHz) for available frequencies.
- Axustar o volume: Speak into the lavalier microphone at your normal speaking volume. Adjust the VOLUME knob on the SR 420 receiver to achieve the desired audio level without distortion. The CLIP indicator should only flash briefly on peaks, not stay lit.
- Ton piloto: The WMS420 system utilizes a pilot tone to ensure reliable operation and prevent interference. This feature automatically mutes the receiver's audio output if the transmitter is turned off or goes out of range, preventing unwanted noise.
- Apagado: To power off, press the ON/OFF button on both the transmitter and receiver.
Mantemento
Coidado da batería
- The PT 420 transmitter is compatible with rechargeable AA batteries. If using rechargeable batteries, ensure they are fully charged before each use.
- Replace non-rechargeable AA batteries when the low battery warning indicator on the transmitter illuminates.
- Retire as pilas do transmisor se non o vai usar durante un período prolongado para evitar fugas.
Limpeza
- Wipe the surfaces of the receiver and transmitter with a soft, dry cloth.
- Non empregues produtos de limpeza abrasivos, solventes nin produtos químicos agresivos, xa que poden danar o acabado ou os compoñentes internos.
- Keep the microphone clean and free of debris.
Resolución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| Sen son do receptor | Transmitter or receiver not powered on; incorrect channel selection; low battery; audio cable disconnected. | Ensure both units are powered on. Verify transmitter and receiver are on the same channel. Check battery level. Confirm audio cables are securely connected to mixer/PA. |
| Interferencia ou estática | Other wireless devices on the same frequency; receiver too far from transmitter; obstacles blocking signal. | Select a different channel on the receiver and transmitter. Reduce distance between units. Ensure line of sight between transmitter and receiver antennas. Avoid placing near Wi-Fi routers or other RF sources. |
| Low audio level | Receiver volume too low; microphone positioned too far from source. | Increase receiver volume. Reposition lavalier microphone closer to the speaker's mouth. |
| CLIP indicator constantly lit | Input signal too strong, causing distortion. | Reduce the input gain on your mixer/PA system or speak further from the microphone. |
| Transmitter battery drains quickly | Old or low-quality batteries; frequent use. | Use fresh, high-quality alkaline batteries or fully charged rechargeable batteries. Consider having spare batteries on hand. |
Especificacións
| Característica | Detalle |
|---|---|
| Nome do modelo | WMS420 |
| Tecnoloxía de conectividade | Wireless (XLR output on receiver) |
| Banda de frecuencia | Band U2 (614.100 - 629.300 MHz) |
| Sensibilidade Audio | 105 decibeis |
| Relación sinal-ruído | 80 dB |
| Factor de forma do micrófono | Wireless Instrument Set (Presenter Set includes Lavalier) |
| Fonte de enerxía | Battery Powered (1 AA battery for transmitter) |
| Dispositivos compatibles | Sistema PA |
| Peso do elemento | 0.71 quilogramos (aprox. 1.56 libras) |
| Item Dimensions (Receiver) | 16.4 x 12.9 x 3.1 polgadas (aprox.) |
| Model Number (Mfr Part) | 3414H00090 (WMS420P-A) |
| UPC | 885038036500 |
Información da garantía
AKG Acoustics warrants AKG products against defects in material or workmanship for a period of dous anos from the date of original purchase. Select studio and boundary layer microphones may carry a three-year warranty. This warranty is valid for products purchased and delivered within the United States and Canada for the original purchaser only. Your bill of sale serves as proof of purchase and warranty validity.
Exclusións importantes: This warranty does not cover damage resulting from accident, misuse, abuse, lack of reasonable care, the affixing of any attachment not provided with the product, loss of parts, or connecting the product to any receptacle other than specified. The warranty is void unless an authorized AKG service center performs the repair. No responsibility is assumed for any special, incidental, or consequential damages caused by the consumer.
For warranty service, shipment of defective items to AKG for repair will be at the customer's own risk and expense. AKG will assume the return shipping cost for all items repaired under warranty.
Apoio
For further assistance, technical support, or service inquiries regarding your AKG WMS420 Presenter Set, please refer to the official AKG Pro Audio website or contact their customer support. Ensure you have your product model number and purchase details available when seeking support.