Nitecore Digicharger D2 Universal Dual-Slot Battery Charger

1. Produto rematadoview

The Nitecore Digicharger D2 is an intelligent, universal charger compatible with almost all cylindrical rechargeable batteries. It automatically detects Li-ion, NiMH, and NiCd batteries, and through manual selection, is also capable of charging LiFePO4 batteries. Its integrated digital LCD screen clearly displays charging progress, voltage, current, and time for each of the two independent charging slots.

Imaxe 1.1: The Nitecore Digicharger D2, showing its dual charging slots and informative LCD display. This image illustrates the charger in operation with two batteries.

Características principais:

• Capable of charging 2 batteries simultaneously.
• Each of the two battery slots monitors and charges independently.
• Automatically identifies Li-ion, NiMH, and NiCd rechargeable batteries.
• Features three charging modes (CC, CV, and Trickle Charge).
• Detecta automaticamente o estado da batería e selecciona o volume adecuadotage e modo de carga.
• Integrated LCD panel displays charging parameters and progress.
• Automatically stops charging when complete.
• Features over-charge prevention to protect batteries.
• Monitoriza a temperatura para evitar o sobrequecemento.
• Made from durable ABS (fire retardant/flame resistant) material.
• Dispón de protección contra polaridade inversa.
• Designed for optimal heat dissipation.
• Certified by RoHS, CE, FCC, and CEC.

2. Instrucións de seguridade importantes

Please read all instructions and warnings carefully before using this product. Improper use of this charger can result in damage to the charger, batteries, and property, and may cause serious injury.

• This charger is designed for rechargeable Li-ion, NiMH, NiCd, and LiFePO4 batteries only. Do not use with other battery types.
• Non intente cargar baterías non recargables.
• Keep the charger away from water, high humidity, and extreme temperatures.
• Non desmontes, modifiques nin provoques curtocircuítos no cargador.
• Desconecte sempre o cargador da toma de corrente cando non o use ou antes de limpalo.
• Asegúrese de respectar a polaridade correcta das baterías ao inserilas.
• Do not leave charging batteries unattended for extended periods.
• Manter fóra do alcance dos nenos.
• If the charger shows any signs of damage or malfunction, discontinue use immediately.

3. Configuración e funcionamento

3.1. Configuración inicial

1. Desempaquetar: Carefully remove the Nitecore Digicharger D2 and its accessories from the packaging.
2. Conectar enerxía: Connect the power cord to the charger and then plug it into a standard AC power outlet (100-240V). The LCD screen will illuminate, indicating the charger is ready.
3. Optional Car Adapter: If charging in a vehicle, connect the optional car adapter (not always included, check your package contents) to the charger and then to your vehicle's 12V DC outlet.

3.2. Inserción das pilas

The D2 features two independent charging slots. Each slot can accommodate one battery.

1. Identificar a polaridade: Observe the positive (+) and negative (-) markings on the charger and the battery.
2. Inserir batería: Gently slide the battery into the charging slot, ensuring the correct polarity. The spring-loaded mechanism will secure the battery in place.
3. Detección automática: Upon insertion, the D2 will automatically detect the battery type (Li-ion, NiMH, or NiCd) and begin the charging process. For LiFePO4 batteries, manual selection is required (see section 3.3).

3.3. Charging Process and Display

Once a battery is inserted, the LCD screen will display real-time charging information:

• Tipo de batería: Automatically detected (e.g., Li-ion, NiMH).
• Voltage: Vol. actualtage da batería.
• Corrente de carga: The rate at which the battery is being charged (e.g., 0.5A).
• Progreso da carga: Indicated by a battery icon with increasing bars.
• Tempo de carga: Elapsed time since charging began.

Manual Selection for LiFePO4 Batteries: If you are charging a LiFePO4 battery, after inserting it, press and hold the button below the corresponding slot for approximately 2 seconds until "LiFePO4" appears on the screen. The charger will then begin charging in the appropriate mode.

Modo de carga de baixa corrente: For smaller capacity batteries (e.g., below 750mAh), the D2 can be set to a low current charging mode. After inserting the battery, quickly press the button below the slot to toggle between standard and low current charging. This helps prevent overstressing smaller batteries.

Botón de visualización: A dedicated button allows you to cycle through the display information for each slot or turn off the LCD backlight for undisturbed sleep.

Finalización da carga: The charger will automatically stop charging when the battery is full. The display will show "FULL" or a similar indication.

4. Mantemento e coidados

• Limpeza: Desconecte o cargador da corrente antes de limpalo. Use un pano suave e seco para limpar a superficie. Non empregue produtos de limpeza abrasivos nin disolventes.
• Almacenamento: Garde o cargador nun lugar fresco e seco, lonxe da luz solar directa e da humidade cando non o estea a usar.
• Evitar danos: Do not drop the charger or expose it to strong impacts. Avoid placing heavy objects on it.
• Ventilación: Ensure the charger has adequate ventilation during operation. Do not cover it.

5 Solución de problemas

• O cargador non se acende:
  • Ensure the power cord is securely connected to both the charger and the power outlet.
  • Comproba se a toma de corrente funciona.
• Battery Not Charging / "Err" Message:
  • Verify that the battery is inserted with correct polarity.
  • Ensure the battery is a supported rechargeable type.
  • The battery might be severely over-discharged. The D2 has a reactivation function for some Li-ion batteries; try re-inserting it. If it still doesn't charge, the battery might be damaged.
  • Clean the battery contacts and charger contacts.
• Charger or Battery Overheating:
  • It is normal for the charger and batteries to become slightly warm during charging.
  • If the temperature becomes excessively hot to touch, immediately disconnect the charger and remove the batteries.
  • Garantir unha ventilación adecuada ao redor do cargador.
  • Do not charge damaged or faulty batteries.
• Lecturas de visualización incorrectas:
  • This is rare. Try unplugging the charger and plugging it back in.
  • Ensure the battery is fully seated in the slot.

6. Especificacións técnicas

7. Garantía e soporte

For detailed warranty information, terms, and conditions, please refer to the official Nitecore website or contact your local Nitecore distributor. Keep your purchase receipt as proof of purchase for warranty claims.

For technical support or inquiries, please visit the Nitecore official websección de soporte do sitio web ou póñase en contacto directamente co servizo de atención ao cliente.

Official Nitecore Websitio: www.nitecore.com