Manual de usuario do quentador rápido Steba BS-1800

Introdución

Thank you for choosing the Steba BS-1800 Quick Heater. This manual provides essential information for the safe and efficient operation of your new appliance. Please read all instructions carefully before installation and use, and retain this manual for future reference.

The Steba BS-1800 is an energy-saving quick heater designed for bathroom use, featuring a programmable timer, motion sensor, and touch controls for enhanced comfort and efficiency.

Imaxe: Fronte view of the Steba BS-1800 Quick Heater, showcasing its sleek white design and integrated digital display with touch controls.

Instrucións de seguridade importantes

Observe sempre as precaucións básicas de seguridade ao usar electrodomésticos para reducir o risco de incendio, descarga eléctrica e lesións ás persoas.

• Le todas as instrucións antes de usar este aquecedor.
• Este aquecedor está quente cando está en uso. Para evitar queimaduras, non deixe que a pel espida toque superficies quentes.
• É necesario ter extrema precaución cando calquera aquecedor é usado por nenos ou persoas inválidas ou preto de eles e sempre que o aquecedor se deixa en funcionamento e sen vixilancia.
• Non opere ningún calefactor cun cable ou enchufe danado ou despois de que o calefactor funcione mal, caese ou danouse de calquera xeito.
• Do not use outdoors. This heater is intended for indoor, bathroom use only.
• Para desconectar o aquecedor, apague os controis e, a continuación, retire o enchufe da toma de corrente.
• Non insira nin permita que entren obxectos estraños en ningunha abertura de ventilación ou escape, xa que isto pode provocar unha descarga eléctrica ou incendio, ou danar o quentador.
• Para evitar un posible incendio, non bloquee de ningún xeito as entradas ou escapes de aire.
• Este aquecedor ten partes quentes e con arcos ou chispas no seu interior. Non o use en áreas onde se use ou se almacene gasolina, pintura ou líquidos inflamables.
• Use este aquecedor só como se describe neste manual. Calquera outro uso non recomendado polo fabricante pode provocar incendios, descargas eléctricas ou lesións ás persoas.
• This appliance is splash-proof (IP24 rated) and suitable for bathroom installation, but must not be installed directly above a bath or shower.

Configuración e instalación

The Steba BS-1800 Quick Heater is designed for wall-mounted installation. Ensure the mounting location is suitable and adheres to local electrical and safety regulations.

Lugar de montaxe

• Choose a wall location that is clear of obstructions and allows for proper air circulation.
• Ensure the wall material can support the weight of the heater (approximately 4.84 pounds).
• Maintain a safe distance from water sources, as per IP24 rating guidelines for bathroom appliances.

Pasos de instalación

1. Carefully unpack the heater and all accessories. Inspect for any damage.
2. Using the provided mounting template (if included) or by measuring the heater's dimensions, mark the drilling points on the wall. Refer to the dimensions diagram below.
3. Fai buratos e coloca os tacos de parede axeitados (non sempre están incluídos, dependendo do tipo de parede).
4. Fixe o soporte de montaxe á parede.
5. Carefully hang the heater onto the mounting bracket, ensuring it is securely seated.
6. Connect the power plug to a suitable electrical outlet. Ensure the outlet is properly grounded and rated for the heater's power requirements.

Image: Dimensional diagram of the Steba BS-1800 heater, indicating a height of 49 cm, width of 30 cm, and depth of 10 cm for precise installation planning.

Imaxe: Traseira view of the Steba BS-1800 Quick Heater, illustrating the design for wall mounting and the location of the air intake vent.

Instrucións de funcionamento

The Steba BS-1800 features intuitive touch controls and various modes for optimal heating.

Panel de control rematadoview

The front panel features a digital display and touch-sensitive buttons for power, mode selection, temperature adjustment, and timer settings.

Operación básica

1. Encendido/apagado: Press the power button (usually indicated by a circle with a vertical line) to turn the heater on or off.
2. Axuste de temperatura: Use the up/down arrows to set your desired room temperature. The heater features a stepless adjustable room thermostat.
3. Selección de modo: Press the 'mode' button to cycle through available operating modes.

Funcións avanzadas

• Temporizador programable: Set the timer for a daily hot bath or specific heating periods. Consult the display for timer programming options.
• Sensor de movemento: The integrated motion sensor detects presence and can activate an ECO mode, reducing energy consumption when no movement is detected.
• Modo ECO: This energy-saving mode automatically adjusts heating output based on motion detection, optimizing power usage.
• Detección de ventá aberta: The heater can detect open windows and temporarily suspend heating to prevent energy waste.
• Modo de protección contra xeadas: This mode maintains a minimum temperature to prevent freezing in the room.

Image: A graphic highlighting key features of the Steba BS-1800, including motion detection, open window detection, frost protection mode, and a programmable timer for individual weekday scheduling.

Image: The Steba BS-1800 Quick Heater installed in a modern bathroom, demonstrating its function as a towel warmer, providing practical comfort.

Mantemento

Regular maintenance ensures the longevity and efficient operation of your Steba BS-1800 Quick Heater.

Limpeza

• Desconecte sempre o quentador e déixeo arrefriar completamente antes de limpalo.
• Limpe as superficies exteriores cun suave, damp pano. Non use produtos de limpeza ou disolventes abrasivos.
• Asegúrate de que non entre auga nos compoñentes internos.

Mantemento de filtros

The heater may contain a washable, removable filter. Regularly check and clean the filter to maintain optimal airflow and heating efficiency.

• Locate the filter access point (typically on the side or rear of the unit).
• Remove the filter and gently clean it with a soft brush or rinse under lukewarm water.
• Allow the filter to dry completely before reinserting it into the heater.

Resolución de problemas

If you encounter issues with your Steba BS-1800 Quick Heater, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact Steba customer support for assistance.

Especificacións

Garantía e Soporte

Specific warranty details are not provided in the product information. For warranty claims, technical support, or service inquiries, please contact Steba customer service directly or refer to the warranty card included with your purchase.

Keep your purchase receipt as proof of purchase for any warranty-related matters.