Bromic Heating Smart-Heat Platinum 500 Radiant Infrared Patio Heater User Manual

1. Introdución

This manual provides essential information for the safe and efficient operation of your Bromic Heating Smart-Heat Platinum 500 Radiant Infrared Patio Heater. This natural gas heater delivers 39,800 BTU/hour of direct heat, designed to warm outdoor living spaces effectively. Please read all instructions carefully before installation and use.

Figura 1: Fronte view of the Bromic Heating Smart-Heat Platinum 500 Radiant Infrared Patio Heater.

2. Información importante de seguridade

AVISO: A instalación, axuste, alteración, servizo ou mantemento inadecuados poden causar lesións ou danos materiais. Lea atentamente as instrucións de instalación, funcionamento e mantemento antes de instalar ou reparar este equipo.

• Asegúrese de que haxa unha ventilación axeitada ao usar o quentador.
• Non almacene nin use gasolina ou outros vapores e líquidos inflamables nas proximidades deste ou de calquera outro aparello.
• Manteña os nenos e as mascotas lonxe do quentador durante o funcionamento.
• Maintain clear distances from combustible materials as specified in the installation section.
• Este produto contén substancias químicas que o Estado de California sabe que causan cancro e defectos conxénitos ou outros danos reprodutivos. (Advertencia da Proposición 65)

3. Características do produto

• Sleek Contemporary Styling: Features brushed stainless steel and tinted ceramic glass for an aesthetic design.
• Radiant Infrared Burner: Heats up quickly, providing direct heat to warm individuals in the area.
• Resistencia ao vento: Designed to operate effectively in winds up to 12 miles per hour for consistent heating.
• Soporte de montaxe axustable: The wall bracket houses the control system away from heat and allows the heater head to pivot 25-degrees to the left and right of center for directional heat.
• Aplicación versátil: Apto tanto para instalacións residenciais como comerciais.
• Automatic Reignition: Provides continuous heat and convenience.
• Construción duradeira: Made of stainless steel with a brushed finish.
• Electronic Ignition System: Requires 120V for operation.

Figure 2: The sleek design of the Bromic Platinum 500 heater.

4. Instalación

Installation of the Bromic Smart-Heat Platinum 500 heater should be performed by a qualified and licensed professional in accordance with local codes and regulations.

4.1 Opcións de montaxe

The heater offers flexible mounting options:

• Montado na parede: Utilize the provided mounting bracket. The bracket allows the heater to pivot 25 degrees left or right.
• Ceiling Suspended: Can be hung from the ceiling using an optional Ceiling Post Mount (not included).

The optimum mounting height is 8 feet from the floor to the bottom of the heater. If the distance above the heater is less than 42 inches, or if the heater will be exposed to elements, an accessory Heat Deflector must be used.

Figura 3: Lateral view illustrating the mounting bracket and design.

4.2 Conexións de gas e electricidade

• Connect to a natural gas supply. All gas connections must comply with local codes.
• The electronic ignition system requires a 120V electrical supply. Ensure proper grounding.

5. Instrucións de funcionamento

5.1 Arranque do quentador

1. Asegúrese de que a válvula de subministración de gas estea aberta.
2. Activate the electronic ignition system (requires 120V). The heater features automatic reignition.
3. Allow a few minutes for the radiant elements to reach full operating temperature.

5.2 Adjusting Heat Direction

The mounting bracket allows the heater head to pivot 25 degrees to the left or right. Carefully adjust the heater's angle to direct heat to your desired area. Ensure the heater is cool before making physical adjustments.

5.3 Apagar o quentador

1. Deactivate the electronic ignition system.
2. Close the main gas supply valve if the heater will not be used for an extended period.

6. Mantemento

Regular maintenance ensures optimal performance and longevity of your heater. Always ensure the heater is completely cool and the gas supply is turned off before performing any maintenance.

• Limpeza: Periodically clean the exterior surfaces with a soft, damp pano. Non use produtos de limpeza ou disolventes abrasivos.
• Vidro cerámico: The tinted ceramic glass should be inspected for cracks or damage. Clean gently if necessary.
• Inspección do queimador: Annually, have a qualified technician inspect the burner and gas connections for any blockages or wear.
• Heat Deflector: If an optional heat deflector is installed, ensure it is free from debris.

7 Solución de problemas

If you encounter issues with your heater, refer to the following common troubleshooting steps. For complex problems, contact a qualified service technician.

7.1 Heater Not Igniting

• Check if the natural gas supply valve is fully open.
• Verify that the 120V electrical supply for the electronic ignition is active.
• Ensure there are no obstructions around the burner.

7.2 Insufficient Heat Output

• Confirm the heater is positioned correctly to direct heat to the desired area.
• Check for strong winds exceeding 12 mph, which can reduce heating effectiveness.
• Ensure the area is within the recommended heating coverage of 200 square feet.

8. Especificacións

Figure 4: Dimensional drawing of the heater.

9. Garantía e soporte

For warranty information and customer support, please refer to the documentation included with your product or visit the official Bromic Heating websitio. Conserve o recibo de compra para reclamacións de garantía.