ENDEAVOUR FIRES Castleton 39-inch Electric Fireplace User Manual

1. Introdución

Benvido

Grazas pola compraasing the ENDEAVOUR FIRES Castleton Electric Fireplace. This manual provides essential information for the safe and efficient operation of your new appliance. Please read these instructions thoroughly before installation and use, and retain them for future reference.

Información importante de seguridade

• Lea todas as instrucións antes de usar este aparello.
• Non fagas funcionar ningunha lareira cun cable ou enchufe danados, ou se o quentador funcionou de forma avariada, se deixou caer ou sufriu danos de calquera xeito.
• Non a empregue no exterior. Esta lareira está pensada só para uso en interiores.
• Manteña os materiais combustibles, como mobles, almofadas, roupa de cama, papeis, roupa e cortinas a polo menos 3 pés (0.9 m) da parte frontal da lareira.
• Desenchufe sempre a lareira cando non estea en uso.
• Non pase o cable debaixo da alfombra. Non cubra o cable con alfombras, corredores ou revestimentos similares. Coloque o cable lonxe da zona de tráfico e onde non se tropece.
• Para desconectar a lareira, apague os controis e, a seguir, retire o enchufe da toma de corrente.
• Esta lareira está quente cando está en uso. Para evitar queimaduras, non deixe que a pel espida toque superficies quentes.
• Always use a grounded, fused electrical outlet.
• Asegúrese de que a fonte de alimentación voltage coincide coa etiqueta de clasificación do electrodoméstico.
• The heater outlet is located at the front. Do not obstruct the heater outlet.
• This appliance is equipped with a safety cut-off device to prevent overheating. If the heater stops working, unplug the unit, wait 10-15 minutes, and then plug it back in.

2. Contido do paquete

Carefully unpack all components and check against the list below. Ensure all items are present and undamaged before proceeding with assembly.

• Castleton Fireplace Surround (Off-White MDF)
• Electric Fire Unit with Log Effect Fuel Bed
• Mando a distancia multifunción
• Pilas AAA (2) para o control remoto
• Ferraxes de montaxe (parafusos, tarugos, etc.)
• Manual de instrucións

3. Montaxe e Instalación

Antes de Comezar

Ensure you have sufficient space for assembly and that the chosen location for the fireplace meets the safety requirements outlined in Section 1.

Ferramentas necesarias

• Destornillador Phillips

Pasos de montaxe

1. Assemble the Fireplace Surround: The surround is supplied flat-packed. Follow the detailed diagrams provided in the separate assembly guide (if included) or the general instructions to connect the MDF panels using the provided hardware. Ensure all connections are secure.
2. Insert the Electric Fire Unit: Once the surround is assembled, carefully slide the electric fire unit into the designated opening from the front. Ensure it sits flush and is properly aligned within the surround.
3. Secure the Fire Unit: Use the provided screws to secure the electric fire unit to the fireplace surround from the inside or designated attachment points.

Figura 1: Traseira view of the electric fire unit, illustrating its compact design for easy insertion into the surround.

Consideracións de colocación

• Place the assembled fireplace on a flat, stable surface.
• Ensure the power cable (1.7m length, right side) can reach a suitable grounded electrical outlet without being stretched or obstructed.
• Maintain adequate clearance from walls and other objects as specified in the safety information.
• The design allows for a television to be placed on top of the mantelpiece.

Figure 2: Dimensions of the Castleton fireplace surround (1000mm W x 830mm H x 275mm D).

Figure 3: The Castleton electric fireplace integrated into a modern living space.

4. Funcionamento

The fireplace is operated using the supplied multi-function remote control.

Funcións de control remoto

Figure 4: Multi-function remote control with LCD display.

• Botón de acendido/apagado (activado/desactivado): Acende ou apaga a unidade da cheminea.
• Flame Effect Button: Activates or deactivates the flame effect. The intensity and brightness can be adjusted.
• Mood Lighting Select: Cycles through the 13 available ambient light colors or sets it to automatically transition between colors. Includes a dimming function.
• Heating/Advance (M): Activates the heater. Press to cycle between 1kW and 2kW heat settings.
• Thermostatic Sensor: The remote control includes a thermostatic sensor for accurate room temperature detection.
• Temporizador: Sets the operational timer from 30 minutes up to 9 hours.
• Scroll Left/Right Arrows: Used to navigate through flame and lighting options on the LCD display.
• Frechas cara arriba/abaixo: Adjusts flame intensity, heat levels, or light brightness.
• Botón Atrás: Returns to the previous menu or setting.

Using the Thermostat and Programmer

The remote control allows for thermostatic control and 7-day programmable heating. Refer to the remote control's specific instructions for detailed programming steps to set desired temperatures and operating times.

5. Características clave

• Efecto de chama realista: Features an incredibly vivid flame effect with a molded log fuel bed, enhancing the ambiance of any room.
• 13 Colour Mood Lighting: Offers 13 ambient light color options, which can be set to a fixed color or cycle automatically. Includes a dimming function for customizable atmosphere.

Figura 5: Examples of the 13 available mood lighting colors.

• Operación independente: The flame effect and ambient lighting can be operated independently of the heating function, allowing for year-round use.
• Quiet Heater: Features a quiet heating operation with forward-facing output, providing warmth without significant noise.
• Eco-Design Compliant: Designed and manufactured to meet Eco-design 2018 (Lot 20) requirements for optimal energy efficiency.
• Corte de seguridade: Equipped with an automatic safety cut-off to prevent overheating.

6. Mantemento

Limpeza

• Desconecte sempre a lareira da toma de corrente antes de limpala.
• Wipe the exterior surfaces of the fireplace surround with a soft, damp pano. Non use produtos de limpeza ou disolventes abrasivos.
• Gently dust the electric fire unit's glass panel and log bed with a soft, dry cloth.
• Asegúrate de que non entre humidade nos compoñentes eléctricos.

Almacenamento

If storing the fireplace for an extended period, ensure it is clean, dry, and unplugged. Store in a cool, dry place, protected from dust and extreme temperatures.

7 Solución de problemas

Antes de contactar co servizo de atención ao cliente, consulta a seguinte guía de resolución de problemas para coñecer os problemas máis habituais.

8. Especificacións técnicas

9. Garantía e soporte

Información da garantía

Please refer to the warranty card included with your purchase or contact your retailer for specific warranty terms and conditions. Keep your proof of purchase for any warranty claims.

Atención ao cliente

If you encounter any issues not covered in the troubleshooting section or require further assistance, please contact the retailer or manufacturer's customer support. Contact details can typically be found on the product packaging or the retailer's websitio.