Extron DTP HDMI 230 RX

Manual do usuario do extensor de par trenzado HDMI DTP HDMI 230 Rx de Extron

1. Introdución

The Extron DTP HDMI 230 Rx is a digital twisted pair receiver designed to extend HDMI, audio, and bidirectional RS-232 and IR signals. It operates with Extron DTP-enabled products, transmitting signals up to 230 feet (70 meters) over a shielded CATx cable. This device provides an efficient solution for extending HDMI with embedded multi-channel audio from HDMI-equipped sources. Additionally, the DTP HDMI 230 Rx supports analog stereo audio signals from a DTP-enabled product via the same shielded twisted pair cable. It is compatible with computer video resolutions up to 2560x1600, 1080p/60 Deep Color, and 4K resolutions. Its compact design and remote power capability allow for flexible placement, such as in lecterns or behind flat-panel displays.

Extron DTP HDMI 230 Rx unit showing front and rear ports

Figura 1: The Extron DTP HDMI 230 Rx unit. The top view shows the 'OVER DTP' RS-232 and IR connections. The bottom view displays the 'DTP IN' port, 'POWER' input, 'HDMI' output, and 'AUDIO' output connections.

2. Características clave

  • Receives HDMI plus control and analog audio up to 230 feet (70 meters) over a shielded CATx cable.
  • Supports computer video up to 2560x1600, HDTV 1080p/60 Deep Color, and 4K resolutions.
  • Compatible with CATx shielded twisted pair cable.
  • Recoméndase encarecidamente o cable de par trenzado blindado XTP DTP 24 de Extron para un rendemento óptimo.
  • Accepts additional analog stereo audio signals.

3. Contido do paquete

Please verify that all items are present and in good condition upon opening the package. The standard package for the Extron DTP HDMI 230 Rx typically includes:

  • Extron DTP HDMI 230 Rx unit
  • Setup Guide / Instruction Manual
  • Terminal blocks for RS-232/IR and Audio connections
  • Mounting accessories (e.g., small blue connectors, zip ties)
  • Power supply (not explicitly shown but required for operation)
Extron DTP HDMI 230 Rx unboxed contents including unit, manual, and small parts

Figura 2: Contents of the Extron DTP HDMI 230 Rx package, showing the receiver unit, setup guide, and a bag containing small connectors and zip ties.

4. Instrucións de configuración

Follow these steps to set up your Extron DTP HDMI 230 Rx:

  1. Desembalaxe e inspección: Carefully remove all components from the packaging. Inspect each item for any signs of damage.
  2. Montaxe: Secure the DTP HDMI 230 Rx unit in your desired location. Its compact size allows for discreet placement behind displays or within lecterns.
  3. Conexión de alimentación: Connect the provided power supply to the POTENCIA input on the DTP HDMI 230 Rx unit. Ensure the power adapter is connected to a suitable power outlet.
  4. DTP Input Connection: Connect a shielded CATx cable from a compatible Extron DTP-enabled transmitter to the DTP IN port on the DTP HDMI 230 Rx. For optimal performance, Extron XTP DTP 24 shielded twisted pair cable is recommended.
  5. HDMI Output Connection: Conecte un cable HDMI desde o HDMI output port on the DTP HDMI 230 Rx to the HDMI input of your display device (e.g., TV, projector).
  6. Audio Output Connection (Optional): If using analog stereo audio, connect the audio output from the DTP HDMI 230 Rx to your audio system using the provided terminal blocks.
  7. Control Connections (Optional - RS-232/IR): If bidirectional control is required, connect your RS-232 or IR control cables to the respective ports on the DTP HDMI 230 Rx using the provided terminal blocks.

5. Instrucións de funcionamento

Once all connections are made, operate the DTP HDMI 230 Rx as follows:

  1. Encendido: Ensure all connected devices, including the source, the DTP transmitter, the DTP HDMI 230 Rx, and the display, are powered on.
  2. Transmisión de sinal: The DTP HDMI 230 Rx will automatically detect and process the HDMI, audio, and control signals transmitted from the DTP transmitter.
  3. Indicadores de estado: Observe the LED indicators on the unit:
    • SIG (Signal): Illuminates when a valid HDMI signal is detected.
    • ENLACE: Illuminates when a stable DTP link is established with the transmitter.
  4. Resolution and Deep Color: The unit supports automatic resolution scaling and Deep Color passthrough up to its maximum specified capabilities.

6. Mantemento

To ensure the longevity and optimal performance of your Extron DTP HDMI 230 Rx, follow these maintenance guidelines:

  • Keep the unit clean and free from dust accumulation. Use a soft, dry cloth for cleaning.
  • Asegúrese de que haxa unha ventilación axeitada arredor da unidade para evitar o sobrequecemento.
  • Avoid exposing the unit to moisture, liquids, or extreme temperatures.
  • Comprobe regularmente todas as conexións dos cables para asegurarse de que estean seguras e sen danos.
  • Do not attempt to open or service the unit yourself. Refer all servicing to qualified Extron personnel.

7 Solución de problemas

If you encounter issues with your DTP HDMI 230 Rx, refer to the following troubleshooting steps:

  • Sen saída de vídeo/audio:
    • Verify that all power connections are secure and the unit is receiving power.
    • Check the integrity and connection of the DTP shielded CATx cable between the transmitter and receiver.
    • Ensure all HDMI cables are securely connected at both the source, receiver, and display ends.
    • Confirm that the source device is powered on and outputting a signal.
    • Check the input selection on your display device to ensure it is set to the correct HDMI input.
  • Mala calidade de vídeo ou sinal intermitente:
    • Ensure that a blindado CATx cable is being used. Unshielded cables can lead to signal degradation.
    • Verify that the cable length is within the specified maximum of 230 feet (70 meters).
    • For optimal performance, consider using Extron XTP DTP 24 shielded twisted pair cable.
    • Check for potential sources of electromagnetic interference (EMI) near the cable run.
  • Control Signals (RS-232/IR) Not Working:
    • Verify all RS-232/IR cable connections and ensure they are correctly wired using the terminal blocks.
    • Confirm that the DTP transmitter is correctly configured for control signal passthrough.

8. Especificacións

Número de modeloDTP HDMI 230 RX
FabricanteExtron
Dimensións do produto0.39 x 0.39 x 0.39 polgadas
Peso do elemento12.8 onzas
Dispositivos compatiblesTelevisión
Usos específicos do produtoTV
Tipo de conectorHDMI
Data de primeira dispoñibilidade5 de decembro de 2014

9. Garantía e soporte

For warranty information, technical support, or service inquiries regarding your Extron DTP HDMI 230 Rx, please refer to the official Extron website or contact Extron customer support directly. Keep your purchase receipt for warranty validation.

Documentos relacionados - DTP HDMI 230 RX

Preview Extron DTP HDMI 4K 330 User Guide: HDMI Twisted Pair Extender
User guide for the Extron DTP HDMI 4K 330, a Long Distance High Definition Multimedia Interface (HDMI) Twisted Pair Extender. This document provides comprehensive instructions on installation, operation, features, and technical specifications for extending HDMI, DVI, analog audio, and control signals up to 330 feet (100 meters) over twisted pair cable.
Preview Extron DTP T DSW 4K Series Setup Guide: Installation and Configuration
A concise setup guide for experienced installers on setting up and operating the Extron DTP T DSW 4K series of twisted pair (TP) switchers, covering front and rear panel connections, installation steps, and control device integration.
Preview Extron PVT HDMI Installation Guide
Installation guide for the Extron PVT HDMI AV wallplate, detailing its features, compatibility, and step-by-step installation process for AV systems.
Preview Distribución HDMI da serie DTP HD DA 4K de Extron AmpGuía de usuario de lifier
Guía completa do usuario para a distribución HDMI da serie DTP HD DA 4K de Extron Amplifiadores. Abarca a instalación, a configuración e o funcionamento, detallando as características para distribuír sinais HDMI, de audio e de control a través de cableado de par trenzado de ata 330 metros, con soporte para resolucións 4K e compatibilidade con HDBaseT.
Preview Extron DTP3 T 202/DTP3 R 201 User Guide: HDMI Twisted Pair Extenders
Comprehensive user guide for Extron's DTP3 T 202 Transmitter and DTP3 R 201 Receiver, detailing installation, operation, and configuration of these 4K HDMI twisted pair extenders for long-distance AV signal transmission.
Preview Extron DTP2 T/R 211: User Guide for HDMI Twisted Pair Extenders
This user guide details the Extron DTP2 T/R 211 system, comprising HDMI Twisted Pair Extenders for transmitting HDMI digital video, analog audio, and control signals up to 330 feet (100 meters). It covers installation, operation, features, and technical specifications, supporting resolutions up to 4K/60 @ 4:4:4.