1. Produto rematadoview
The Permatex 81160 High-Temp Red RTV Silicone Gasket Maker is a specialized sealant designed for heavy-duty applications requiring resistance to extreme temperatures. This product forms reliable gaskets that can withstand intermittent temperatures ranging from -65 °F a 650 °F (-54 °C a 343 °C).
It is formulated to create durable, flexible, and waterproof seals for various automotive and industrial repair needs.
Image 1.1: Permatex 81160 High-Temp Red RTV Silicone Gasket tube. This image shows the product packaging, highlighting the brand, product name, and key features.
2. Información de seguridade
Always read and understand all safety precautions before using this product. Use personal protective equipment as required.
2.1. Precautionary Statements - Prevention
- Contains: Calcium carbonate, Iron oxide.
- Obter instrucións especiais antes do uso.
- Non manipular ata que todas as precaucións de seguridade sexan lidas e comprendidas.
- Use equipos de protección individual segundo sexa necesario.
2.2. Precautionary Statements - Response
- SE NOS OLLOS: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists, get medical advice/attention.
- EN CASO DE PEL: Wash with plenty of soap and water. If skin irritation or rash occurs, get medical advice/attention. Wash contaminated clothing before reuse.
2.3. Precautionary Statements - Storage
- Protexer da luz solar.
- Almacenar nun lugar ben ventilado.
- Tenda pechada.
- Manter fóra do alcance dos nenos.
3. Configuración
3.1. Preparación da superficie
For optimal results, ensure that all surfaces where the gasket maker will be applied are limpo e seco. Remove any old gasket material, grease, oil, or other contaminants that could interfere with adhesion.
4. Instrucións de aplicación
- Prepare Nozzle: Cortar a boquilla ao tamaño desexado.
- Apply Gasket Maker: Apply a continuous bead of silicone, approximately 1/16" to 1/4" (2 to 6mm) thick, to one surface. Ensure the bead surrounds all bolt holes.
- Montar pezas: Immediately assemble the parts while the silicone is still wet.
- Aperte inicial: Finger tighten the assembly until the material begins to squeeze out around the flange.
Imaxe 4.1: Ex.ample of Permatex 81160 High-Temp Red RTV Silicone Gasket application. This image illustrates the product being applied as a continuous bead on a surface.
5. Curing and Finishing
- Initial Dry Time: Allow the gasket maker to dry for unha hora.
- Apertura final: After the initial dry time, tighten the assembly to the manufacturer's specified torque.
- Tempo de cura completo: Permitir 24 horas for the gasket maker to fully cure before filling with fluids or returning the component to service.
6. Mantemento
6.1. Almacenamento de produtos
Despois de cada uso, replace the cap securely to prevent the product from drying out. Store the tube in a cool, dry, well-ventilated area, away from direct sunlight and out of reach of children.
7. Troubleshooting and Limitations
Nota importante: Este produto é NOT recommended for use on head gaskets or on parts that will come into direct contact with gasoline. Using the product in these applications may lead to product failure and potential damage.
8. Especificacións do produto
| Característica | Detalle |
|---|---|
| Nome do produto | Permatex High-Temp Red RTV Silicone Gasket Maker |
| Número de modelo | 81160 |
| Marca | Permatex |
| Material | Silicona |
| Cor | Vermello |
| Temperature Range (Intermittent) | -65 °F a 650 °F (-54 °C a 343 °C) |
| Tempo de cura completa | 24 horas |
| Volume do elemento | 3 onzas líquidas |
| Nivel de resistencia á auga | Impermeable |
| UPC | 686226811608 |
9. Información de eliminación
Dispose of contents and container in accordance with local regulations and to an approved waste disposal plant. Do not dispose of in household waste.
10. Contacto e asistencia
For further assistance or inquiries, please contact Permatex:
- Fabricante: Permatex Chemicals, a division of ITW
- Enderezo: Solon, OH 44139, USA
- Peaxe gratuíta: 866-732-9502
- Websitio: www.permatex.com
Permatex and its design are trademarks of Illinois Tool Works Inc. The product is assembled in the U.S.A. with U.S. and global materials.
11. Información da garantía
Specific warranty details for Permatex products are typically available on the manufacturer's official website or by contacting their customer support directly. Please refer to www.permatex.com ou chamar 866-732-9502 for the most current warranty information.