T.I.P. 30172

T.I.P. GPS 3200 Plus Garden Pump Instruction Manual

1. Produto rematadoview

The T.I.P. GPS 3200 Plus is a lightweight, mobile, and versatile garden pump designed for efficient water transfer. It features a durable plastic body and an integrated on/off switch. This pump is ideal for handling clear water, suitable for tasks such as filling and emptying water reservoirs, and powering garden sprinkler systems. Its high efficiency makes it an excellent choice for various irrigation needs. The pump is equipped with a maintenance-free capacitor motor that includes thermal overload protection for enhanced safety and longevity. The robust pump body is constructed from impact-resistant plastic.

T.I.P. GPS 3200 Plus Garden Pump on grass
The T.I.P. GPS 3200 Plus garden pump, showcasing its compact design and plastic housing, ready for use in a garden setting.

2. Instrucións de seguridade importantes

Please read and understand all safety instructions before operating the pump to prevent injury or damage.

  • Seguridade eléctrica: Always connect the pump to a properly grounded outlet. Do not operate the pump with damaged cables or plugs. Keep electrical connections dry.
  • Seguridade na auga: Never operate the pump without water. Ensure the suction hose is fully submerged. Do not pump flammable, corrosive, or explosive liquids.
  • Seguridade persoal: Keep children and pets away from the operating pump. Wear appropriate personal protective equipment if necessary.
  • Colocación estable: Place the pump on a stable, level surface to prevent tipping. Protect the pump from direct sunlight, rain, and frost.
  • Mantemento: Disconnect the power supply before performing any maintenance, cleaning, or troubleshooting.

3. Contido do paquete

Verifica que todos os compoñentes estean presentes no paquete:

  • 1x T.I.P. GPS 3200 Plus Garden Pump
  • 1x 4-meter Suction Hose
  • 1x 20-meter Garden Hose
  • 1x 4-piece Connection Kit
T.I.P. GPS 3200 Plus Garden Pump with connected hoses
The T.I.P. GPS 3200 Plus garden pump shown with the suction and garden hoses connected, illustrating a typical setup.
4-meter suction hose for garden pump
The included 4-meter suction hose, designed for drawing water from a source.
20-meter garden hose for irrigation
The included 20-meter garden hose, suitable for various irrigation tasks.
4-piece connection kit for garden pump
The included 4-piece connection kit, featuring various adapters and nozzles for hose attachment.

4. Guía de configuración

Follow these steps to set up your T.I.P. GPS 3200 Plus garden pump:

4.1 Colocación

  • Choose a stable, level, and dry location for the pump.
  • Ensure the pump is protected from direct weather conditions (rain, frost, intense sunlight).
  • Coloque a bomba o máis preto posible da fonte de auga para minimizar a altura de succión.

4.2. Suction Hose Connection

  • Securely attach the 4-meter suction hose to the pump's inlet port. Ensure an airtight seal to prevent air from entering the system.
  • Place the other end of the suction hose, equipped with a foot valve and filter, into the water source. Ensure the foot valve is fully submerged and clear of debris.

4.3. Conexión da mangueira de presión

  • Connect the 20-meter garden hose to the pump's outlet port.
  • Attach any desired accessories, such as sprinklers or nozzles, to the end of the garden hose using the provided 4-piece connection kit.

4.4. Cebado da bomba

  • Before initial use, the pump housing must be filled with water. Locate the filling opening (usually a screw cap on top of the pump housing).
  • Pour water into the filling opening until the pump housing is completely full.
  • Replace the filling cap securely. This step is crucial for the pump to create suction.

5. Funcionamento da bomba

Once the pump is set up and primed, follow these steps for operation:

5.1. Arranque da bomba

  • Ensure all hose connections are secure and airtight.
  • Verify that the suction hose is fully submerged in the water source.
  • Connect the power cable to a suitable, grounded electrical outlet.
  • Switch the pump on using the integrated on/off switch. The pump should start drawing water.

5.2. During Operation

  • Monitor the pump for any unusual noises or vibrations.
  • Ensure a continuous supply of water to prevent the pump from running dry, which can cause damage.
  • If the water flow stops or becomes intermittent, switch off the pump immediately and check for issues.

5.3. Parada da bomba

  • Switch the pump off using the on/off switch.
  • Desconecte o cable de alimentación da toma de corrente.
  • If the pump will not be used for an extended period, follow the winter storage instructions in the maintenance section.

6. Mantemento e coidados

Un mantemento regular garante un rendemento óptimo e prolonga a vida útil da súa bomba.

6.1. Limpeza regular

  • Limpar periodicamente o exterior da bomba con anunciosamp pano. Non use produtos químicos agresivos.
  • Check the suction filter (at the end of the suction hose) for blockages and clean it as needed.

6.2. Almacenamento de inverno

  • Before the first frost, completely drain all water from the pump and hoses. This prevents damage from freezing.
  • Garde a bomba nun lugar seco e libre de xeadas.
  • Desconecte todas as mangueiras e almacénaas correctamente.

6.3. Inspección

  • Regularly inspect all hoses and connections for signs of wear, cracks, or leaks. Replace damaged components immediately.
  • Comprobe o cable de alimentación por se hai danos.

7. Solución de problemas comúns

Refer to the table below for solutions to common operational problems:

ProblemaCausa posibleSolución
A bomba non arrancaNo power supply; Thermal overload protection activated; Faulty switchCheck power connection and circuit breaker; Allow pump to cool down; Contact customer support
Pump runs but no water is deliveredPump not primed; Air in suction line; Suction hose not submerged; Suction filter clogged; Water source emptyRe-prime the pump; Check all suction connections for airtightness; Ensure suction hose is fully submerged; Clean suction filter; Replenish water source
Baixa presión da augaPartial blockage in hoses or accessories; Leaks in suction line; Insufficient primingCheck and clean hoses/accessories; Inspect suction line for leaks and tighten connections; Re-prime the pump thoroughly
A bomba é ruidosaAir in the system; Pump running dry; Debris in pump housingCheck for air leaks in suction line and re-prime; Ensure continuous water supply; Disconnect power and inspect pump for debris (if safe to do so)

8. Especificacións técnicas

EspecificaciónValor
Número de modelo30172
Poder650 W
Caudal máximo3200 Liters per hour (54 l/min)
Maximum Head (Pressure)42 Meters (4.2 bar)
Material do corpo da bombaPlástico
Peso9.8 quilogramos
Dimensións do produto (L x W x H)36 x 40 x 31.5 cm
Fonte de enerxíaEléctrico con cable
Compoñentes incluídos1x Garden Pump, 1x 4m Suction Hose, 1x 20m Garden Hose, 1x 4-piece Connection Kit
Usos específicosGardening activities, Outdoor water management

9. Garantía e atención ao cliente

T.I.P. is committed to providing high-quality and durable products. For your peace of mind, T.I.P. offers a 10-year guarantee on the availability of spare parts for this product. This ensures that you can maintain and repair your pump for an extended period.

T.I.P. 10-year spare parts availability guarantee
An image indicating T.I.P.'s commitment to 10 years of spare parts availability for their products, ensuring long-term usability.

For technical assistance, warranty claims, or to order spare parts, please contact T.I.P. customer support through their official website or the retailer where the product was purchased. Please have your model number (30172) and purchase date available when contacting support.

Recursos en liña: For additional information and support, visit the official T.I.P. websitio: www.tip-pumpen.de

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.