Datalogic Barcodescanner Touch TD1100 90 Light (TD1120-BK-90K1) User Manual

Introdución

This manual provides instructions for the Datalogic Barcodescanner Touch TD1100 90 Light, model TD1120-BK-90K1. It covers essential information for setting up, operating, maintaining, and troubleshooting your device to ensure optimal performance. Please read this manual thoroughly before using the scanner.

Image: The Datalogic Touch TD1100 90 Light barcode scanner, showing its ergonomic design and integrated cable.

Configuración

1. Desembalaxe

Retire con coidado todos os compoñentes da embalaxe. Comprobe que estean presentes todos os elementos:

Datalogic Touch TD1100 90 Light Barcode Scanner
Cable USB (integrado)
Guía de inicio rápido (se se inclúe)

2. Conexión do escáner

The TD1120-BK-90K1 model connects via a USB interface. Follow these steps:

Localiza un porto USB dispoñible no teu ordenador (de sobremesa ou portátil).
Insert the USB connector of the scanner's cable firmly into the USB port.
The operating system should automatically detect the new hardware and install the necessary drivers. This process may take a few moments.
Once drivers are installed, the scanner will typically emit a short beep or an indicator light will illuminate, signifying it is ready for use.

Datalogic Touch TD1100 90 Light Barcode Scanner with cable

Imaxe: Lateral view of the Datalogic Touch TD1100 90 Light barcode scanner, highlighting the integrated cable for connection.

Instrucións de funcionamento

1. Procedemento básico de dixitalización

Para escanear un código de barras:

Asegúrate de que o escáner estea conectado e acendido.
Open an application on your computer where you want the scanned data to appear (e.g., a text editor, spreadsheet, or POS software).
Sujete o escáner coa xanela de dixitalización orientada cara ao código de barras.
Press and hold the trigger button. A red aiming line or light will project from the scanning window.
Position the aiming line across the entire barcode.
Once the barcode is successfully read, the scanner will emit a beep and/or the indicator light will flash green. The data will then appear in your active application.
Release the trigger button.

2. Scanning Techniques

Distancia óptima: Hold the scanner at an appropriate distance from the barcode, typically between 2-10 cm (1-4 inches), depending on the barcode size and density.
Ángulo: Scan barcodes at a slight angle to avoid direct reflection, which can interfere with reading.
Damaged Barcodes: For poorly printed or damaged barcodes, try scanning from different angles or distances.

Mantemento

1. Limpeza do escáner

Regular cleaning helps maintain optimal scanning performance.

Xanela de dixitalización: Use un pano suave e sen pelusa dampened with a mild, non-abrasive cleaner (e.g., isopropyl alcohol or glass cleaner) to gently wipe the scanning window. Avoid harsh chemicals or abrasive materials.
Exterior: Limpar o exterior casing cun suave, damp cloth. Do not allow liquids to enter the scanner.
Ensure the scanner is disconnected from the power source before cleaning.

2. Almacenamento

When not in use, store the scanner in a clean, dry environment, away from direct sunlight, extreme temperatures, and corrosive materials.

Resolución de problemas

If you encounter issues with your Datalogic TD1100 scanner, refer to the following common problems and solutions:

Problema	Causa posible	Solución
O escáner non se acende nin responde.	Loose cable connection, faulty USB port, power issue.	Asegúrese de que o cable USB estea conectado correctamente tanto ao escáner como ao ordenador. Proba cun porto USB diferente no teu ordenador. Test the scanner on another computer if possible.
O escáner non le códigos de barras.	Incorrect scanning technique, damaged barcode, dirty scanning window, incompatible barcode type, application not ready.	Adjust scanning distance and angle. Limpe a xanela de dixitalización como se describe na sección Mantemento. Ensure the barcode is not severely damaged or smudged. Verify that the active application is ready to receive input. Consult the full product manual for supported barcode symbologies.
Os datos dixitalizados aparecen incorrectamente.	Keyboard wedge settings, incorrect language settings.	Check your computer's keyboard layout settings. Refer to the full product manual for programming barcodes to adjust scanner settings (e.g., keyboard wedge mode, suffix/prefix).

Especificacións

Key technical specifications for the Datalogic Touch TD1100 90 Light (TD1120-BK-90K1):

Número de modelo: TD1120-BK-90K1
Marca: Datalogic
Taxa de dixitalización: 90 fotogramas por segundo (fps)
Tecnoloxía de conectividade: Bluetooth
Dispositivos compatibles: Escritorio, portátil
Fonte de enerxía: Alimentado por batería
Peso do artigo: 153 gramos
Ángulo real de View: 3.5 graos
Fabricante: Datalogic

Note: Some specifications like "Battery Powered" and "Bluetooth" might be generic for the TD1100 series. The TD1120-BK-90K1 is primarily a wired USB scanner.

Garantía e Soporte

Información da garantía

Datalogic products are covered by a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Datalogic websitio. Garda o comprobante de compra para reclamacións de garantía.

Soporte técnico

For technical assistance, troubleshooting beyond this manual, or to inquire about repairs, please contact Datalogic customer support. You can typically find contact information on the Datalogic websitio web ou na documentación que se inclúe co escáner.

Datalogic Official Websitio: www.datalogic.com
Recursos de apoio: Check the support section of the website for FAQs, drivers, and additional documentation.

Datalogic TD1120-BK-90K1