beyerdynamic DT 1770 Pro

Auriculares Beyerdynamic DT 1770 Pro Studio

Manual de usuario

Introdución

The beyerdynamic DT 1770 Pro is a professional studio reference headphone designed for mixing, mastering, monitoring, and recording applications. Featuring Tesla 2.0 technology, these closed-back headphones deliver precise and powerful sound reproduction. This manual provides essential information for the proper setup, operation, and maintenance of your DT 1770 Pro headphones.

Auriculares Beyerdynamic DT 1770 Pro Studio

Image: beyerdynamic DT 1770 Pro Studio Headphones, front view.

Configuración

Follow these steps to set up your beyerdynamic DT 1770 Pro headphones:

  1. Desembalaxe: Carefully remove all components from the premium carrying case. The package includes the headphones, two sets of ear pads (velour and leatherette), two detachable cables (one coiled, one straight 3m), and a 1/4" adapter.
  2. Attaching Ear Pads: Select your preferred ear pads. The velour pads offer a breathable feel, while the leatherette pads provide enhanced sound isolation. Align the ear pad with the earcup and gently stretch it around the rim until it is securely seated.
  3. Conexión do cable: The DT 1770 Pro features a single-sided, detachable cable with a mini-XLR connector. Insert the mini-XLR end of your chosen cable (coiled or straight) into the port on the left earcup until it clicks securely into place.
  4. Conexión á fonte de audio: Connect the other end of the cable (3.5 mm jack) to your audio device. If your device requires a 1/4" connection, use the included adapter. Ensure the connection is firm.
  5. Axuste de axuste: Adjust the headband to ensure a comfortable and secure fit. The earcups should fully enclose your ears without excessive pressure.
Close-up of beyerdynamic DT 1770 Pro earcup with detachable cable port

Imaxe: Primeiro plano view of the DT 1770 Pro earcup, highlighting the detachable cable connection point.

En funcionamento

The DT 1770 Pro headphones are designed for optimal performance with professional audio equipment. Due to their 250 Ohm impedance, a dedicated headphone amplifier or an audio interface with sufficient output power is recommended for optimal sound quality and volume levels.

  • Control de volume: Adjust the volume directly from your audio source or amplifier. Start with a low volume and gradually increase it to a comfortable listening level.
  • Illamento acústico: These closed-back headphones provide passive sound isolation, reducing external noise and preventing sound leakage.
  • Uso estendido: The ergonomic design and soft, replaceable ear pads are engineered for comfort during long studio sessions. Take regular breaks to prevent listening fatigue.
Person wearing beyerdynamic DT 1770 Pro headphones while working on a computer

Image: A person wearing beyerdynamic DT 1770 Pro headphones, demonstrating typical usage in a studio environment.

Mantemento

Proper care ensures the longevity and performance of your headphones:

  • Limpeza: Use a soft, dry cloth to clean the exterior of the headphones. For ear pads, follow specific cleaning instructions provided by beyerdynamic or use a mild, damp pano e déixaos secar completamente ao aire antes de volvelos colocar.
  • Ear Pad Replacement: Ear pads are replaceable. If they become worn or damaged, new ones can be purchased from authorized retailers. Refer to the setup section for removal and attachment.
  • Coidado do cable: The detachable cables are designed for durability. Avoid sharp bends or excessive pulling. If a cable becomes damaged, it can be replaced.
  • Almacenamento: When not in use, store the headphones in the provided premium carrying case to protect them from dust, moisture, and physical damage.

Resolución de problemas

If you encounter issues with your headphones, consider the following:

  • Sen son:
    • Ensure the cable is securely connected to both the headphone and the audio source.
    • Check the volume level on your audio source and any connected ampmáis vivo.
    • Test the headphones with a different audio source or cable to isolate the problem.
  • Son distorsionado:
    • Reduce the volume level on your audio source.
    • Asegúrate de que a fonte de son ofreza un sinal limpo.
    • Verify that the ear pads are correctly attached and not obstructing the drivers.
  • Ajuste incómodo:
    • Adjust the headband for a looser or tighter fit.
    • Try switching between the velour and leatherette ear pads to find the most comfortable option for extended wear.

Especificacións

CaracterísticaEspecificación
Nome do modeloDT 1770 PRO
Marcabeyerdynamic
Colocación do oídoSobre orella
Factor de formaPechado
Tecnoloxía de conectividadeCon cable
Impedancia250 ohmios
Resposta en frecuencia5 - 40,000 Hz
Tipo de controlador de audioDynamic Tesla Neodymium Drivers
Tamaño do controlador de audio45 milímetros
Control de ruídoIllamento acústico
Función de cableDetachable, Single-sided
Peso do elemento1.5 libras (aprox. 680 g)
Dimensións do produto7 x 8.5 x 4 polgadas
Compoñentes incluídosHeadphones, Premium Carrying Case, Coiled Cable, Straight Cable (3m), Leatherette Earpads, 1/4" Adapter

Vídeo oficial do produto

Video: An official beyerdynamic video showcasing the features and design of the DT 1770 Pro Studio Headphones.

Garantía e Soporte

For warranty information, technical support, or to purchase replacement parts and accessories, please visit the official beyerdynamic websitio web ou póñase en contacto co seu servizo de atención ao cliente. Tamén pode atopar máis información sobre beyerdynamic Store on Amazon.

© 2023 beyerdynamic. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.