NVX VUBT2 Universal Waterproof Bluetooth Audio Receiver Instruction Manual

1. Produto rematadoview

The NVX VUBT2 is a universal waterproof Bluetooth 4.0 audio receiver designed to add wireless audio streaming capabilities to various vehicles and vessels, including marine, boats, cars, and ATVs. It features a robust, water-resistant design and provides high-quality stereo audio output.

Características principais:

• Bluetooth Profile: A2DP (audio estéreo de alta calidade)
• Bluetooth Core Specification: Version 4.0 with aptX
• Saídas: One Stereo Pair, Low-Level RCA Plugs
• Vol. De saídatage: 2 V RMS
• Relación sinal a ruído: 93 dB (20 Hz - 20 kHz)
• Resistencia á auga: IPX67 rated for protection against dust and water immersion.
• Conectividade: Entrada/saída de audio de 3.5 mm.
• Encendido remoto: Amplifier remote turn-on feature.

2. Información de seguridade

Lea atentamente todas as instrucións antes da instalación e o uso. O incumprimento destas instrucións pode provocar danos no produto, danos materiais ou lesións persoais.

• Ensure the vehicle's power is disconnected before installation to prevent electrical shorts.
• Use appropriate wiring gauges and fuses as recommended.
• Mount the device securely to prevent movement during operation.
• Do not expose the device to extreme temperatures or direct flame.
• While the device is waterproof (IPX67), ensure all connections are properly sealed and protected from direct water exposure to maintain integrity.

3. Contido do paquete

Verifica que todos os elementos estean presentes no teu paquete:

• NVX VUBT2 Bluetooth Audio Receiver
• Power/Ground/Remote Wiring Harness with In-line Fuse
• Cable de audio de 3.5 mm a RCA
• Mounting Hardware (screws or adhesive pads)

Image: The NVX VUBT2 Bluetooth Audio Receiver shown with its power/ground/remote wiring harness, in-line fuse, and 3.5mm to RCA audio cable.

4. Configuración e instalación

4.1 Conexións de cableado

The VUBT2 requires power, ground, and a remote turn-on connection. It outputs audio via RCA connections.

1. Alimentación (cable vermello): Connect the red wire to a switched 12V power source. This can be the accessory wire from your vehicle's ignition or a dedicated switch. The in-line fuse should be installed close to the power source.
2. Terra (fío negro): Connect the black wire to a solid chassis ground point. Ensure a clean, secure connection for optimal performance.
3. Acendido remoto (cable azul): Connect the blue wire to the remote turn-on input of your amplifier or other audio components. This will power on the VUBT2 when your system is activated.
4. Audio Output (3.5mm to RCA): Connect the 3.5mm jack from the VUBT2 to the included 3.5mm to RCA cable. Then, connect the RCA plugs (red for right, white for left) to the audio input of your amplifier ou unidade principal.

Image: The NVX VUBT2 Bluetooth receiver wired to an amplifier, demonstrating the remote turn-on and RCA audio connections.

Image: Close-up of the 3.5mm audio output connected to RCA cables, ready for connection to an audio system.

4.2 Montaxe

The compact design of the VUBT2 allows for flexible mounting options. It can be mounted using screws through its integrated tabs or with adhesive pads (if included).

• Choose a location that is dry, secure, and allows for proper cable routing.
• Ensure the mounting surface is clean and flat if using adhesive.
• The device is IPX67 rated, making it suitable for exposed locations, but protecting connections is still recommended.

Image: The underside of the NVX VUBT2 unit, displaying the 3M adhesive backing for secure mounting in various applications.

5. Instrucións de funcionamento

5.1 Emparejamento Bluetooth

1. Ensure the VUBT2 is powered on (your audio system is active).
2. No teu dispositivo móbil (teléfono intelixente, tableta, etc.), navega ata a configuración de Bluetooth.
3. Scan for available Bluetooth devices. The VUBT2 will appear as "NVX VUBT2" or similar.
4. Select the VUBT2 to pair. A confirmation tone or LED indicator may signal a successful connection.
5. Once paired, your device will typically reconnect automatically when in range and the VUBT2 is powered on.

5.2 Reprodución de audio

After successful pairing, you can stream audio from your mobile device to your connected audio system. Control playback (play/pause, skip tracks, volume) directly from your paired device.

Image: A smartphone screen displaying music controls, illustrating how users can manage audio playback through the NVX VUBT2.

6. Mantemento

The NVX VUBT2 is designed for durability and minimal maintenance. Follow these guidelines to ensure longevity:

• Limpeza: Use un suave, damp cloth to wipe the exterior of the unit. Avoid harsh chemicals or abrasive cleaners.
• Resistencia á auga: While IPX67 rated, avoid prolonged submersion or high-pressure water jets directly on the unit or its connections. Regularly inspect wiring and connections for any signs of wear or damage that could compromise water resistance.
• Conexións: Comprobe periodicamente todas as conexións do cableado para asegurarse de que estean seguras e libres de corrosión.

Image: The NVX VUBT2 unit covered in water droplets, illustrating its IPX67 water-resistance rating for use in challenging environments.

7 Solución de problemas

8. Especificacións

9. Información da garantía

NVX products are designed and manufactured to the highest quality standards. For specific warranty details, including coverage period and terms, please refer to the warranty card included with your product or visit the official NVX websitio. Garda o comprobante de compra para reclamacións de garantía.

10. Atención ao cliente

If you encounter any issues or have questions regarding your NVX VUBT2 Bluetooth Audio Receiver that are not covered in this manual, please contact NVX customer support for assistance.

• Soporte en liña: Visit the official NVX websitio web con preguntas frecuentes, recursos de asistencia e información de contacto.
• Atención ao vendedor: For purchase-related inquiries, contact the seller directly.