Soundbot SB210 HD Stereo Bluetooth Beanie User Manual

Introdución

Grazas pola compraasing the Soundbot SB210 HD Stereo Bluetooth Beanie. This manual provides essential information for the proper setup, operation, and maintenance of your device. Please read it thoroughly before use to ensure optimal performance and longevity of the product.

Información de seguridade

• Non expoña o dispositivo a temperaturas ou humidades extremas.
• Keep the device away from water and liquids, except when the electronic components are removed for washing.
• Non intente desmontar nin modificar o dispositivo. Isto anulará a garantía.
• Emprega só o cable de carga incluído ou un equivalente certificado.
• Evite escoitar a volumes altos durante períodos prolongados para evitar danos auditivos.

Contido do paquete

• Soundbot SB210 HD Stereo Bluetooth Beanie
• Cable de carga micro USB
• Manual de usuario

Produto rematadoview

The Soundbot SB210 integrates Bluetooth audio technology into a comfortable beanie, allowing for wireless music playback and hands-free calling.

Image: The Soundbot SB210 Beanie featuring its integrated control panel on the side.

Funcións do panel de control

• Botón Reproducir/Pausa: Acender/apagar, reproducir/pausar música, responder/finalizar chamadas.
• Botón para subir o volume (+): Increase volume (short press), next track (long press).
• Botón para baixar o volume (-): Decrease volume (short press), previous track (long press).
• Micrófono: Para chamadas mans libres.
• Porto micro USB: Para cargar a batería interna.

Configuración

1. Charging the Beanie

Before initial use, fully charge the beanie. Locate the Micro USB charging port on the control panel. Connect the provided Micro USB cable to the port and the other end to a USB power source (e.g., wall adapter, computer USB port). The LED indicator will show charging status. A full charge typically takes approximately one hour and provides a full day of playback.

Image: The Micro USB charging port integrated into the beanie's control panel.

2. Emparejamento cun dispositivo Bluetooth

1. Ensure the beanie is charged and turned off.
2. Press and hold the Play/Pause button on the control panel until the LED indicator flashes red and blue alternately. This indicates the beanie is in pairing mode.
3. No teu dispositivo con Bluetooth (teléfono intelixente, tableta, etc.), vai á configuración de Bluetooth e activa Bluetooth.
4. Busca available devices. You should see "SB210" or "Soundbot Beanie" in the list.
5. Select "SB210" to connect. Once successfully paired, the LED indicator will typically show a solid blue light or flash blue slowly.

3. Wearing the Beanie

Place the beanie on your head, ensuring the integrated speakers are positioned comfortably over your ears. The beanie is designed to stay securely in place during various activities.

Instrucións de funcionamento

1. Acendido/apagado

• Encendido: Press and hold the Play/Pause button for approximately 3 seconds until the LED indicator lights up.
• Apagado: Press and hold the Play/Pause button for approximately 3 seconds until the LED indicator turns off.

2. Reprodución de música

• Reproducir/Pausa: Prema brevemente o botón Reproducir/Pausa.
• Próxima pista: Mantén premido o botón para subir o volume (+).
• Pista anterior: Mantén premido o botón para baixar o volume (-).

3. Control de volume

• Aumentar o volume: Prema brevemente o botón para subir volume (+).
• Diminuír o volume: Prema brevemente o botón para baixar o volume (-).

4. Chamadas mans libres

The integrated microphone allows for hands-free communication when paired with your smartphone.

• Responder/Finalizar chamada: Prema brevemente o botón Reproducir/Pausa.
• Rexeitar a chamada: Prema e manteña premido o botón Reproducir/Pausa.
• Volver a marcar o último número: Prema dúas veces o botón Reproducir/Pausa.

Mantemento

1. Washing Instructions

The beanie is washable, but the electronic components must be removed first.

1. Locate the zipper on the inside lining of the beanie.
2. Unzip the lining and gently pull out the internal speakers and control module, which are typically held in place by Velcro. Be careful not to pull too hard on the connecting wires.
3. Once the electronic components are removed, the beanie can be machine washed according to the fabric care instructions (100% Acrylic, Machine Wash).
4. Allow the beanie to dry completely before reinserting the electronic components.
5. Carefully reinsert the speakers and control module, ensuring they are properly positioned over the ears, and secure them with the Velcro. Zip up the lining.

Image: The internal speaker component that needs to be removed before washing.

2. Almacenamento

Store the beanie in a cool, dry place away from direct sunlight and extreme temperatures when not in use.

Resolución de problemas

• O dispositivo non se acende: Ensure the beanie is fully charged. Connect it to a power source using the Micro USB cable.
• Non se pode emparellar co dispositivo Bluetooth:
  • Ensure the beanie is in pairing mode (LED flashing red and blue).
  • Make sure Bluetooth is enabled on your device and it is within range (up to 33 feet).
  • Try turning off and on both the beanie and your Bluetooth device.
  • Clear previous Bluetooth connections on your device and attempt to pair again.
• Sen son ou volume baixo:
  • Check the volume levels on both the beanie and your connected device.
  • Ensure the beanie is properly paired and connected.
  • Verify that the speakers are correctly positioned over your ears.
• Blue LED flashes during use: This is normal behavior indicating the Bluetooth connection is active.

Especificacións

Garantía e Soporte

Soundbot products are designed and manufactured to the highest quality standards. For specific warranty details and support, please refer to the warranty card included with your purchase or visit the official Soundbot websitio.

Oficial Websitio: www.SoundBot.com