Introdución
The Gingko Gravity Cube Click Clock GK18PK is a compact and innovative alarm clock designed to display time, date, and temperature. It features a sound-activated LED display, a touch-sensitive snooze function, and a unique gravity-controlled alarm deactivation method. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your device.
Contido do paquete
- Gingko Gravity Cube Click Clock GK18PK
- Cable de alimentación USB
- Manual de usuario (este documento)
Configuración
Alimentando o dispositivo
The Gravity Cube Click Clock can be powered via the included USB cable. Connect the small end of the USB cable to the DC 5V port on the back of the clock and the larger end to a USB power adapter (not included) or a powered USB port.
The clock also requires 1 Lithium Polymer battery for backup power, which is not included. Ensure the correct battery type is used and installed according to polarity markings.
Imaxe: Traseira view of the Gingko Gravity Cube Click Clock. This image displays the back panel of the clock, highlighting the 'SET', '+', '-', 'Alarm', and 'V/S' buttons, along with the DC 5V power input port at the bottom. The Gingko logo is visible in the center.
Encendido inicial
Once connected to power, the LED display will illuminate. The clock will typically default to a 24-hour time format and Celsius temperature. You can adjust these settings in the operating instructions section.
Instrucións de funcionamento
Display Modes (Time, Date, Temperature)
The clock automatically alternates between displaying the time, date, and temperature. The LED display is sound-activated. To activate the display when it's off, gently tap the surface the clock is on, click your fingers, or clap your hands. The display will automatically switch off after a short period of silence to conserve energy.
Imaxe: Fronte view of the Gingko Gravity Cube Click Clock. The clock, in a pink finish, is shown on a white desk surface, displaying the time '12:43' in bright white LED digits.
Axuste da hora e da data
- Manteña premido o SET button on the back of the clock until the display starts flashing.
- Usa o + e - botóns para axustar a hora. Prema SET para confirmar e pasar á seguinte configuración.
- Repita para minutos, ano, mes e día.
- After setting the date, you may be prompted to select 12-hour or 24-hour format, and Celsius or Fahrenheit for temperature. Use + e - para seleccionar e SET para confirmar.
Configuración da alarma
- Preme o Alarma button on the back of the clock. The alarm time will appear, and the alarm icon will flash.
- Manteña premido o Alarma botón ata que a hora da alarma comece a parpadear.
- Usa o + e - botóns para axustar a hora da alarma. Prema Alarma para confirmar e pasar aos minutos.
- Axusta os minutos usando + e -. Preme Alarma para confirmar.
- The display will then show 'ON' or 'OFF'. Use + or - to toggle the alarm on or off. Press Alarma para gardar e saír.
Función de repetición
When the alarm sounds, gently touch the top surface of the clock to activate the snooze function. The alarm will pause for a set period (typically 5 minutes) and then sound again.
Desactivando a alarma
To completely turn off the alarm when it is sounding (not just snooze), simply turn the clock over onto any of its other sides. This action will deactivate the alarm until the next set alarm time.
Mantemento
Limpeza
To clean the clock, use a soft, dry, or slightly damp cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the rubberized finish and display.
Substitución da batería
If you are using a backup battery, ensure it is replaced with the correct type (1 Lithium Polymer battery) when depleted. Incorrect battery types or improper installation can lead to malfunction or damage. Refer to the battery compartment for specific instructions and polarity.
Resolución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| A pantalla está escura ou ilexible. | Insufficient power; ambient light too bright; display brightness setting. | Ensure the clock is connected to a stable power source. Move the clock to a less brightly lit area. Check if there's a brightness setting (refer to manufacturer's website if not in manual). |
| Clock not turning on. | No power; faulty cable/adapter. | Verify USB cable is securely connected to both the clock and a working power source. Try a different USB cable or power adapter. |
| Alarm not sounding or turning off incorrectly. | Alarm not set; volume too low; clock orientation issue. | Ensure the alarm is set and activated (check for alarm icon on display). Verify the clock is placed on a flat, stable surface for proper gravity detection. |
| Clock beeps or faults unexpectedly. | Low battery (if using backup); internal error. | Replace the Lithium Polymer backup battery if installed. Disconnect and reconnect power to reset the device. |
| Power adapter is incompatible (e.g., UK plug). | Regional power adapter provided. | The clock uses a standard USB power cable. You will need a compatible USB power adapter for your region (e.g., a US USB wall adapter for use in the United States). |
Especificacións
- Número de modelo: GK18PK
- Dimensións do produto: 7.62 cm de ancho x 7.62 cm de alto
- Tipo de visualización: LED dixital
- Fonte de enerxía: Corded Electric (DC 5V via USB)
- Batería de respaldo: 1 batería de polímero de litio (non incluída)
- Características especiais: Alarm, Sound-activated display, Gravity-controlled alarm off, Touch-sensitive snooze, Time/Date/Temperature display
- Fabricante: Gingko
- Uso interior/exterior: Interior