HyperX Savage DDR4 Memory Module User Manual

Introdución

This manual provides essential information for the installation, operation, and maintenance of your HyperX Savage DDR4 memory modules. The HyperX Savage DDR4 memory is designed to complement Intel's 2, 4, 6, or 8 core processors, offering enhanced performance for tasks such as video editing, 3D rendering, gaming, and AI processing. These modules feature speeds up to 3000MHz and latencies of CL15, optimized for Intel's 100 series chipset and X99 chipset motherboards, supporting easy overclocking via XMP profiles.

Imaxe: Fronte view of the HyperX Savage DDR4 memory module, showcasing its black heat spreader with the HyperX logo and Savage DDR4 branding.

Contido do paquete

Verifique que o seu paquete conteña os seguintes elementos:

• 2 x HyperX Savage DDR4 Memory Modules (8GB each, 16GB Kit)

Configuración e instalación

Before installing the memory modules, ensure your system is powered off and unplugged from the wall outlet. It is recommended to wear an anti-static wrist strap to prevent electrostatic discharge (ESD) damage to components.

1. Preparación

1. Verificación de compatibilidade: Confirm that your motherboard supports DDR4 DIMM memory modules and the specified speed (3000MHz). Refer to your motherboard's manual for details.
2. Apagado: Apaga o ordenador completamente e desconecta o cable de alimentación.
3. Caso aberto: Open your computer's side panel to access the motherboard.

2. Instalación de módulos

1. Localizar as ranuras DIMM: Identify the DDR4 DIMM slots on your motherboard. Consult your motherboard manual for the correct slot configuration for dual-channel memory.
2. Abrir clips: Gently push down the retention clips at both ends of the DIMM slot.
3. Aliñar o módulo: Hold the memory module by its edges, avoiding contact with the gold pins. Align the notch on the module with the key in the DIMM slot.
4. Inserir módulo: Apply even pressure to both ends of the module until it seats firmly into the slot and the retention clips snap into place. Do not force the module.
5. Repetir: Install the second memory module into the corresponding slot as indicated by your motherboard manual.

Imaxe: En ángulo view of the HyperX Savage DDR4 memory module, showing the heat spreader design and the gold contact pins.

3. Post-instalación

1. Pechar caso: Volva colocar o panel lateral da caixa do ordenador.
2. Reconectar a enerxía: Plug the power cable back into your computer and power it on.

Instrucións de funcionamento

After physical installation, it is important to configure your system's BIOS/UEFI to utilize the full potential of your HyperX Savage DDR4 memory modules.

Enabling XMP Profile

HyperX Savage DDR4 memory modules come with built-in Intel XMP (Extreme Memory Profile) profiles. Estes profiles are optimized for Intel 100 series chipsets and X99 motherboards, allowing for easy overclocking without manual timing adjustments.

1. Acceder á BIOS/UEFI: During system startup, repeatedly press the designated key (commonly DEL, F2, F10, ou F12) to enter your motherboard's BIOS or UEFI settings. The specific key varies by motherboard manufacturer.
2. Localizar a configuración XMP: Navigate to the memory or overclocking section within the BIOS/UEFI. Look for an option related to 'XMP', 'DOCP', 'A-XMP', or 'Memory Profile'.
3. Activar Profile: Selecciona o profesional de XMPfile (usually 'Profile 1' or 'Enabled') to automatically configure the memory to its rated speed (3000MHz) and timings (CL15) at 1.35V.
4. Gardar e saír: Garda os cambios e sae da BIOS/UEFI. O sistema reiniciarase coa nova configuración de memoria aplicada.

If your system does not support XMP, the memory will operate at a default JEDEC speed, typically 2133MHz or 2400MHz, depending on your motherboard and CPU.

Mantemento

HyperX Savage DDR4 memory modules are designed for durability and reliability. Minimal maintenance is required to ensure optimal performance and longevity.

• Manter limpo: Periodically clean the interior of your computer case to prevent dust buildup on the memory modules and other components. Use compressed air to gently remove dust.
• Manipulación adecuada: Ao manipular módulos de memoria, suxeiteos sempre polos bordos para evitar tocar os contactos dourados ou os circuítos integrados.
• Control de temperatura: Ensure adequate airflow within your computer case to maintain optimal operating temperatures for all components, including memory.

Resolución de problemas

If you encounter issues after installing your HyperX Savage DDR4 memory, consider the following troubleshooting steps:

• O sistema non arranca:
  • Ensure the memory modules are fully seated in their slots and the retention clips are locked.
  • Verify that your motherboard supports the installed memory type and speed.
  • Try booting with only one module installed to identify a potentially faulty module.
• Incorrect Speed Detected:
  • Access your BIOS/UEFI settings and ensure the XMP profile está activado.
  • Update your motherboard's BIOS/UEFI to the latest version, as this can improve memory compatibility and stability.
• Inestabilidade ou fallos do sistema:
  • Executa unha ferramenta de diagnóstico de memoria (por exemplo, Windows Memory Diagnostic ou MemTest86) para comprobar se hai erros.
  • Asegúrate de que a túa fonte de alimentación (PSU) proporcione enerxía suficiente e estable a todos os compoñentes.
  • Check for proper cooling within your system to prevent overheating.

Especificacións

Garantía e Soporte

HyperX Savage DDR4 memory modules are backed by a lifetime warranty, ensuring long-term reliability and peace of mind. Free technical support is also available to assist with any questions or issues you may encounter.

For warranty claims or technical assistance, please visit the official HyperX support websitio web ou póñase en contacto co servizo de atención ao cliente. Garde o comprobante de compra para validar a garantía.

Soporte de HyperX: www.hyperx.com/asistencia