Introdución
Thank you for choosing the Child Craft Bristol Compact Crib. This manual provides essential information for the safe assembly, operation, and maintenance of your crib. Please read all instructions carefully before assembly and keep this manual for future reference.
The Child Craft Bristol Compact Crib features a low-profile design for easy infant access, a durable wood construction, and includes a 3-inch foam mattress. It is equipped with ultra-quiet casters, two of which are locking, for improved maneuverability and stability.
Información importante de seguridade
ADVERTENCIA: O incumprimento destas advertencias e das instrucións de montaxe podería provocar lesións graves ou a morte.
- Read all instructions before using the crib. Keep instructions for future use.
- Non use este berce se non pode seguir exactamente as instrucións que se acompañan.
- The crib, including side rails, must be fully erected prior to use.
- Non coloque o berce preto dunha xanela onde os cordóns das persianas ou cortinas poidan estrangular a un neno.
- Do not suspend strings or toys over the crib.
- Do not place the crib near heat sources, windows, or other furniture.
- Discontinue use of the crib when a child begins to climb out or reaches the height of 35 inches (89 cm).
- Check this product for damaged hardware, loose joints, missing parts, or sharp edges before and after assembly and frequently during use. Do not use the crib if any parts are missing or broken. Contact Child Craft for replacement parts and instructional literature if needed. Do not substitute parts.
- Infants can suffocate on soft bedding. Never add a pillow or comforter. Never place extra padding under an infant.
- Para reducir o risco de SIDS, os pediatras recomendan que os bebés sans se poñan de costas para durmir, a non ser que o seu médico indique o contrario.
- Proporcione sempre a supervisión necesaria para a seguridade continuada do seu fillo.
- The mattress supplied with this crib is 3 inches thick. Ensure any replacement mattress used is at least 3 inches thick and fits snugly without gaps.
Contido do paquete
Before beginning assembly, ensure all parts are present. If any parts are missing or damaged, do not proceed with assembly. Contact Child Craft customer support for assistance.
- Crib Frame Components (sides, ends, mattress support)
- Paquete de ferramentas (parafusos, pernos, chave Allen)
- 4 x 3-inch Caster Wheels (2 locking, 2 non-locking)
- 1 x 3-inch Foam Mattress
- Manual de instrucións
Configuración e montaxe
Assembly typically requires two adults. Follow the steps below carefully. Do not overtighten fasteners.
- Desempaquetar compoñentes: Carefully remove all parts from the packaging and lay them out on a soft, clean surface to prevent scratching. Verify all package contents are present.
- Fixar rodas: Insert the four 3-inch caster wheels into the designated holes at the bottom of each leg. Ensure the two locking casters are installed on the same side for easier access. Press firmly until they click into place.
- Assemble Crib Frame: Connect the crib ends to the side rails using the provided hardware. Ensure all connections are secure but do not fully tighten until the entire frame is assembled.
- Instalar o soporte do colchón: Position the mattress support frame within the crib. The mattress support can be adjusted to two different height positions. Choose the appropriate height based on the child's age and development. Secure the mattress support to the crib frame using the provided hardware.
- Apertura final: Once all components are assembled, carefully tighten all screws and bolts. Do not overtighten.
- Colchón individual: Insert the 3-inch foam mattress into the crib. Ensure it fits snugly without any gaps between the mattress and the crib sides.
Imaxe: Primeiro plano view of a crib leg with an attached caster wheel. This illustrates how the caster wheels are installed at the base of the crib legs.
Image: Fully assembled Child Craft Bristol Compact Crib in natural wood finish, shown with the included foam mattress. This provides a complete view of the product after assembly.
Instrucións de funcionamento
Axustar a altura do colchón
The mattress support can be set to two different heights. The higher position is for infants, providing easier access for caregivers. The lower position is for older infants and toddlers who can push up on their hands and knees or stand, to prevent them from climbing out.
- Retire o colchón do berce.
- Carefully detach the mattress support from the crib frame by unscrewing the fasteners.
- Re-attach the mattress support to the desired height position, ensuring all fasteners are securely tightened.
- Substitúe o colchón.
Using Caster Wheels
The crib is equipped with four 3-inch caster wheels for easy movement. Two of these casters are locking to secure the crib in place.
- To Move the Crib: Ensure both locking casters are in the unlocked position. Gently push the crib to its desired location.
- To Secure the Crib: Once the crib is in position, engage the locks on the two locking casters by pressing down on the lever. Verify the crib is stable and does not move.
Mantemento e coidados
- Limpeza: Limpar as superficies do berce con anunciosamp cloth. Avoid abrasive cleaners or strong chemicals that could damage the finish or materials.
- Verificación de hardware: Regularly check all screws, bolts, and fasteners to ensure they are tight and secure. Loose hardware can pose a safety hazard.
- Almacenamento: If storing the crib, ensure it is clean and dry. Store in a climate-controlled environment to prevent warping or damage to the wood.
- Coidado co colchón: The foam mattress can be spot cleaned with a mild soap and water solution. Allow to air dry completely before placing back in the crib.
Resolución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| O berce parece tambaleante ou inestable. | Hardware solto. | Check and tighten all screws and bolts. Do not overtighten. |
| As rodas non xiran con suavidade. | Debris in wheels or casters not fully inserted. | Clean any debris from the wheels. Ensure casters are fully seated in the legs. |
| Mattress does not fit snugly. | Incorrect mattress size or improper assembly. | Ensure the correct mattress (3-inch foam mattress included) is used. Recheck crib assembly to ensure all parts are correctly aligned. |
| Crib makes squeaking noises. | Loose joints or friction between wood parts. | Aperte todos os accesorios. Aplique unha pequena cantidade de parafina ou spray de silicona nos puntos de contacto se é necesario. |
Especificacións
- Número de modelo: F99040.04
- Marca: Artesanía infantil
- Material: Madeira
- Cor: Natural (Beige finish)
- Dimensións montadas (L x A x H): 39 cm de longo x 38 cm de ancho x 26.25 cm de alto
- Peso do artigo: 52 libras
- Peso máximo recomendado: 50 libras
- Rodízios: 4 x 3-inch ultra-quiet casters (2 locking)
- Colchón: Includes 3-inch foam mattress
- Soporte do colchón: Adjustable to two positions
- Certificacións de seguridade: Exceeds CPSC and ASTM standards, verified by Baby Safety Alliance.
Información da garantía
Child Craft products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included with your product or contact Child Craft customer support directly. Typically, warranties cover manufacturing defects under normal use.
Atención ao cliente
If you have any questions, require replacement parts, or need assistance with your Child Craft Bristol Compact Crib, please contact the manufacturer or your retailer.
- Fabricante: Fundamentos
- Marca: Artesanía infantil
- Refer to the product packaging or the Child Craft official websitio para obter a información de contacto máis actualizada.