1. Introdución
This manual provides detailed instructions for the installation, operation, and maintenance of your SilverStone Technology Nitrogen Series Low Profile CPU Cooler, model RL-NT09-115X. This cooler is designed for space-limited applications and is compatible with Intel LGA 1156/1155/1150/1151 platforms. It features an extruded aluminum heatsink and a custom 92mm PWM fan for efficient heat dissipation.
Figure 1: SilverStone Nitrogon NT09-115X CPU Cooler, showing its compact design and aluminum fins.
2. Información de seguridade
- Desconecte sempre a alimentación do ordenador antes de instalar ou retirar calquera compoñente.
- Handle the CPU cooler and motherboard with care to avoid damage to sensitive components.
- Use unha pulseira antiestática para evitar danos por descarga electrostática (ESD).
- Manteña as pezas pequenas lonxe dos nenos.
- Ensure proper ventilation inside your computer case for optimal cooling performance.
3. Contido do paquete
Verifica que todos os compoñentes estean presentes no paquete:
- SilverStone Nitrogon NT09-115X CPU Cooler (with pre-applied thermal paste)
- LGA 115x series backplate
- Mounting hardware (push-pins, screws)
Figure 2: Included LGA 115x series backplate, essential for secure mounting.
4. Configuración e instalación
4.1 Preinstalación
- Ensure your motherboard supports Intel LGA 1156/1155/1150/1151 sockets.
- Limpa ben a superficie da CPU con alcohol isopropílico para eliminar calquera pasta térmica antiga ou residuos.
- If the cooler does not have pre-applied thermal paste, apply a thin, even layer of high-quality thermal paste to the center of the CPU's integrated heat spreader (IHS).
4.2 Instalación do refrixerador
- Place the LGA 115x backplate on the backside of the motherboard, aligning the holes with the CPU socket mounting holes.
- Carefully position the CPU cooler over the CPU, aligning the four mounting pins with the holes on the motherboard.
- Press down on each of the four push-pins until they click into place. Apply even pressure diagonally to ensure secure contact. The reinforced backplate design helps reduce motherboard bending and provides tighter CPU contact.
- Conecta o cable do ventilador PWM de 4 pinos do refrigerador á toma CPU_FAN da túa placa base.
Figura 3: Arriba view of the CPU cooler correctly installed on a motherboard.
Figura 4: Lateral view of the CPU cooler installed, highlighting its low-profile deseño.
5. Instrucións de funcionamento
The SilverStone NT09-115X CPU cooler operates automatically via its 4-pin PWM connection to the motherboard. The motherboard's BIOS or operating system software will control the fan speed based on CPU temperature, ensuring optimal cooling performance and noise levels.
- Control PWM: The fan speed will dynamically adjust between its minimum and maximum RPM (up to 2500 RPM) to maintain desired CPU temperatures.
- Fluxo de aire: The fan provides an airflow of up to 47 CFM.
- Nivel de ruído: The maximum noise level is 32.0 decibels, designed for quiet operation.
Figure 5: The custom 92mm PWM fan, designed for efficient and quiet cooling.
6. Mantemento
Un mantemento regular garante un rendemento óptimo e unha maior duración do refrigerador da CPU.
- Eliminación de po: Periodically (e.g., every 3-6 months), use compressed air to clean dust from the heatsink fins and fan blades. Ensure the fan is held stationary during cleaning to prevent damage to the bearings.
- Inspección do ventilador: Check the fan for any obstructions or unusual noises. If the fan is damaged or excessively noisy, consider replacing it.
- Pasta térmica: If you notice consistently high CPU temperatures, the thermal paste may need to be reapplied. This requires removing the cooler, cleaning both surfaces, and applying new thermal paste.
7 Solución de problemas
- Temperaturas altas da CPU:
- Asegúrate de que o refrigerador estea montado de forma segura e que faga bo contacto coa CPU.
- Verify that the thermal paste application is correct and sufficient.
- Check if the fan is spinning correctly and not obstructed by cables.
- Asegúrate de que haxa un fluxo de aire axeitado dentro da carcasa do teu ordenador.
- O ventilador non xira:
- Check if the 4-pin fan connector is securely plugged into the CPU_FAN header on the motherboard.
- Verify fan settings in the motherboard BIOS/UEFI.
- Ruído excesivo do ventilador:
- Limpa calquera po das aspas do ventilador e do disipador de calor.
- Asegúrate de que ningún cable toque as aspas do ventilador.
- Check for loose mounting screws or components.
8. Especificacións
| Característica | Especificación |
|---|---|
| Modelo | RL-NT09-115X |
| Marca | Silverstone |
| Enchufes compatibles | Intel LGA1156/1155/1150/1151 |
| Método de arrefriamento | Air Cooling (Fan) |
| Material | Aluminum (Extruded fins, Aluminum core) |
| Tamaño do ventilador | 92 mm |
| Conector de fan | PWM de 4 pines |
| Velocidade de rotación máxima | 2500 RPM |
| Capacidade de caudal de aire | 47 CFM |
| Nivel de ruído | 32 decibeis (máx.) |
| Voltage | 12 voltios |
| Peso do elemento | 9.6 onzas |
| Dimensións (altura) | 45mm (Low Profile) |
| Dispositivos compatibles | Escritorio |
9. Garantía e soporte
9.1 Información da garantía
The SilverStone Technology Nitrogen Series Low Profile CPU Cooler RL-NT09-115X comes with a 1 ano de garantía covering parts and labor from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by improper installation, accident, abuse, misuse, natural disaster, or unauthorized modification.
9.2 Soporte técnico
For technical assistance, troubleshooting, or warranty claims, please visit the official SilverStone Technology website or contact their customer support. You may find contact information and additional resources at www.silverstonetek.com.
