Clatronic AT 3605 Alcohol Tester User Manual

Introdución

This manual provides instructions for the safe and effective use of your Clatronic AT 3605 Alcohol Tester. Please read this manual thoroughly before operating the device and keep it for future reference. This device is designed for personal use as a preliminary indicator of alcohol presence and should not be used as a basis for legal decisions or official measurements.

Información importante de seguridade

• This device is intended for personal use as a preliminary indicator of alcohol presence. It is not a substitute for official breathalyzer tests or legal evidence.
• Do not operate the device while driving or performing other activities that require full attention.
• Manter fóra do alcance dos nenos.
• Non expoñas o dispositivo a temperaturas extremas, á luz solar directa nin á humidade.
• Use só o tipo de pila especificado (2 x AAA).
• Desfágase das baterías e do dispositivo segundo a normativa local.
• Wait at least 20 minutes after consuming alcohol before performing a test to ensure accurate readings.

Produto rematadoview

The Clatronic AT 3605 is a compact alcohol tester designed for personal use. It features a dual LCD display and provides optical warnings at specific alcohol levels.

Compoñentes do dispositivo

Imaxe 1: Fronte view of the Clatronic AT 3605 Alcohol Tester. The device features a black face with a white casing. It has two digital LCD screens, one for time (12:00) and another for alcohol test results (e.g., 0.3 g/l and 0.3% BAC). Below the screens are three control buttons: MODE, SET, and ADJ. A larger POWER button is located further down. The Clatronic logo is visible at the bottom.

Controis e visualización

• Botón POWER: Acende/apaga o dispositivo.
• Botón MODE: Switches between different display modes (e.g., time display, alarm setting).
• Botón SET: Confirms selections or enters setting modes.
• Botón ADJ: Adjusts values during settings.
• Upper LCD Display: Shows current time (12/24 hour format).
• Lower LCD Display: Shows alcohol test results in g/l and % BAC. Features red backlighting for results and optical warnings.
• Mouthpiece Opening: Located at the top for breath sampling.

Configuración

Instalación de baterías

1. Localiza a tapa do compartimento da batería na parte traseira do dispositivo.
2. Deslice ou abra a tapa.
3. Introduza 2 pilas AAA, asegurándose de manter a polaridade correcta (+/-).
4. Pecha a tapa do compartimento da batería de forma segura.

Nota: The device requires 2 AAA batteries. Ensure fresh batteries are used for accurate readings.

Configuración da hora inicial

Upon first use or after battery replacement, you may need to set the time. Refer to the 'Operating Instructions' for time adjustment.

Instrucións de funcionamento

Performing an Alcohol Test

1. Preme o POTENCIA button to turn on the device. The device will perform a brief self-check.
2. Wait for the device to display "WAIT" or a similar indicator, followed by "BLOW" or a countdown.
3. When prompted, take a deep breath and blow steadily into the mouthpiece opening for approximately 5 seconds. Ensure a continuous breath sample.
4. The device will process the sample and display the results on the lower LCD screen in g/l and % BAC. The display will be red.
5. Optical Warning: The device provides an optical warning at 0.2‰ and 0.5‰. If your result is at or above these levels, the display will flash.
6. The device will automatically shut off after a period of inactivity to conserve battery life.

Setting Time and Alarm (if applicable)

1. With the device on, press the MODO button to cycle through display modes until the time setting mode is reached.
2. Preme o SET button to enter the time adjustment. The hour digit will flash.
3. Usa o ADJ button to change the hour.
4. Preme SET again to move to the minute digit and adjust with ADJ.
5. Continue this process for 12/24 hour format or alarm settings if available.
6. Preme MODO para saír do modo de configuración.

Mantemento

Limpeza

• Wipe the device exterior with a soft, dry cloth.
• Non use produtos de limpeza ou disolventes abrasivos.
• Non mergullo o dispositivo en auga nin en ningún outro líquido.

Almacenamento

• Garda o dispositivo nun lugar fresco e seco lonxe da luz solar directa.
• Se o gardas durante un período prolongado, retira as baterías para evitar fugas.

Resolución de problemas

Especificacións

Garantía e Soporte

For warranty information or technical support, please refer to the warranty card included with your product or visit the official Clatronic website. Keep your purchase receipt as proof of purchase. Spare parts availability is typically 1 year from purchase date.