1. Produto rematadoview
The VIVOTEK AM-116 is a 20cm white pendant pipe designed to provide an extended and secure mounting solution for compatible VIVOTEK surveillance cameras. This accessory facilitates optimal camera positioning for various surveillance applications.
Image 1.1: VIVOTEK AM-116 Pendant Pipe. This image shows the white cylindrical pendant pipe, approximately 20cm in length, designed for camera mounting.
2. Contido do paquete
Verifique que todos os elementos estean presentes no paquete antes de continuar coa instalación.
- VIVOTEK AM-116 Pendant Pipe (1 piece, 20cm, White)
- Ferraxes de montaxe (parafusos, ancoraxes de parede)
- Guía de instalación (este documento)
3. Información de seguridade
Lea e comprenda todas as instrucións de seguridade antes da instalación e o uso. O incumprimento destas instrucións pode provocar lesións ou danos no produto.
- Instalación profesional recomendada: For optimal safety and performance, installation by a qualified professional is recommended.
- Montaxe segura: Ensure the mounting surface is capable of supporting the combined weight of the pendant pipe and the attached camera. Use appropriate mounting hardware for the specific surface material.
- Usar as ferramentas correctas: Always use the correct tools for installation to prevent damage to the product or injury.
- Evitar obstrucións: Do not install the pendant pipe in a location where it might obstruct emergency exits or pathways.
- Seguridade eléctrica: If connecting to a powered camera, ensure all electrical work is performed by a qualified electrician and complies with local electrical codes.
4. Configuración
Follow these steps for proper installation of the VIVOTEK AM-116 Pendant Pipe.
4.1 Mounting the Pendant Pipe
- Identificar a localización de montaxe: Select a suitable, stable surface (e.g., ceiling, wall) that can securely hold the weight of the pendant pipe and the camera.
- Marcar os buratos: Use the pendant pipe's mounting base as a template to mark the positions for drilling holes.
- Perforar buratos piloto: Drill pilot holes of the appropriate size for the provided mounting screws and wall anchors (if necessary for the surface material).
- Secure Pendant Pipe: Attach the pendant pipe securely to the mounting surface using the provided screws. Ensure it is firmly fixed and does not wobble.
- Attach Compatible Device: Connect your compatible VIVOTEK camera (e.g., AE-131 + AM-114, AE-132 + AM-114, AE-151 + AM-114 AM-520, SD83xxE) to the bottom of the pendant pipe according to the camera's specific installation instructions. Ensure all connections are tight and secure.
5. En funcionamento
The VIVOTEK AM-116 Pendant Pipe is a passive mounting accessory. Once properly installed, its primary function is to provide a stable and extended platform for your compatible VIVOTEK surveillance camera. There are no active operational controls for the pendant pipe itself. The operation of the surveillance system will depend on the attached camera and its associated software.
6. Mantemento
Regular maintenance helps ensure the longevity and reliability of your pendant pipe.
- Inspección visual: Periodically inspect the pendant pipe and its mounting points for any signs of damage, corrosion, or loosening.
- Limpeza: If necessary, clean the exterior of the pendant pipe with a soft, damp pano. Non empregue produtos de limpeza abrasivos, solventes nin produtos químicos agresivos, xa que poden danar o acabado.
- Apretar os fixadores: If any mounting screws appear loose, carefully re-tighten them to ensure the pipe remains securely fixed.
7 Solución de problemas
This section addresses common issues related to the VIVOTEK AM-116 Pendant Pipe.
| Problema | Causa posible | Solución |
|---|---|---|
| Pendant pipe feels loose or wobbly after installation. | Mounting screws are not sufficiently tightened, or the mounting surface is inadequate. | Ensure all mounting screws are securely tightened. If the surface is weak, consider reinforcing it or choosing a different mounting location. |
| Camera cannot be attached to the pendant pipe. | Incompatibility with the camera model or incorrect attachment method. | Verify that your camera model is listed as compatible (e.g., AE-131 + AM-114, AE-132 + AM-114, AE-151 + AM-114 AM-520, SD83xxE). Refer to the camera's manual for specific attachment instructions. |
| Visible damage to the pendant pipe. | Physical impact or environmental factors. | If the pipe is damaged, replace it immediately to prevent potential failure and damage to the attached camera. |
8. Especificacións
Key technical specifications for the VIVOTEK AM-116 Pendant Pipe.
| Característica | Detalle |
|---|---|
| Modelo | AM-116 |
| Fabricante | VIVOTEK |
| Cor | Branco |
| Lonxitude | 20 cm (aproximadamente 7.87 polgadas) |
| Dimensións do paquete | 10.98 x 2.72 x 2.6 polgadas |
| Peso do elemento | 1.06 libras |
| ASIN | B01FRC2D2S |
| Dispositivos compatibles | AE-131 + AM-114, AE-132 + AM-114, AE-151 + AM-114 AM-520, SD83xxE |
9. Información da garantía
The VIVOTEK AM-116 Pendant Pipe is covered by a standard manufacturer's warranty. For detailed information regarding warranty terms, conditions, and duration, please refer to the official VIVOTEK websitio web ou póñase en contacto directamente co servizo de atención ao cliente. Garde o comprobante de compra para reclamacións de garantía.
10. Apoio
For technical assistance, product inquiries, or further support, please contact VIVOTEK customer service through their official channels:
- Oficial Websitio: Visit the VIVOTEK official websitio web con recursos de asistencia, preguntas frecuentes e información de contacto.
- Atención ao cliente: Refer to the VIVOTEK website for regional contact numbers or email support.