Technical Precision Replacement for ZEISS IKOLUX AJ24 Light Bulb User Manual

Introdución

This manual provides essential information for the safe and effective use of your Technical Precision Replacement for ZEISS IKOLUX AJ24 Light Bulb. Please read these instructions carefully before installation and retain them for future reference. This bulb is a replacement component and is not manufactured by ZEISS.

Información de seguridade

Seguridade eléctrica: Always disconnect power to the fixture before installing or replacing the bulb to prevent electric shock.
Manexo: Halogen bulbs can become very hot. Allow the bulb to cool completely before handling. Avoid touching the glass part of the bulb with bare hands, as oils can cause hot spots and reduce bulb life. Use a clean cloth or gloves.
Compatibilidade: Asegúrese do volume da lámpada de substitucióntage (22V) e augatage (150W) match the requirements of your ZEISS IKOLUX AJ24 fixture.
Eliminación: Desfágase das lámpadas usadas segundo a normativa local.

Produto rematadoview

The Technical Precision Replacement for ZEISS IKOLUX AJ24 Light Bulb is a high-efficiency halogen bulb designed for specific equipment requiring the IKOLUX AJ24 model. It features a GY6.35 base and a T4 tubular shape.

Technical Precision Replacement for ZEISS IKOLUX AJ24 Light Bulb, front view

Imaxe 1: Fronte view of the Technical Precision Replacement for ZEISS IKOLUX AJ24 Light Bulb. This image shows the clear glass bulb with its internal filament and two-pin GY6.35 base.

Technical Precision Replacement for ZEISS IKOLUX AJ24 Light Bulb, angled view

Imaxe 2: En ángulo view of the Technical Precision Replacement for ZEISS IKOLUX AJ24 Light Bulb, highlighting the tubular shape and pin connectors.

Configuración e instalación

Apagado: Ensure the power supply to the ZEISS IKOLUX AJ24 fixture is completely disconnected before proceeding.
Enfriamento: If replacing an existing bulb, allow it to cool down completely before touching.
Eliminar a lámpada antiga: Carefully remove the old bulb from its socket. Note its orientation if applicable.
Manexo da lámpada nova: Using a clean cloth or gloves, carefully unpackage the new Technical Precision replacement bulb. Avoid touching the glass with bare hands.
Inserir lámpada nova: Align the two pins of the GY6.35 base with the socket in the fixture. Gently push the bulb into place until it is securely seated. Do not force the bulb.
Restaurar enerxía: Unha vez instalada a lámpada de forma segura, restableza a alimentación da luminaria.
Proba: Turn on the fixture to confirm the new bulb is functioning correctly.

Close-up of the GY6.35 base pins on the replacement bulb

Imaxe 3: Primeiro plano view of the GY6.35 base pins, illustrating the connection points for installation.

Instrucións de funcionamento

This replacement bulb operates as a direct substitute for the original ZEISS IKOLUX AJ24 bulb. Operation is controlled by the host fixture's power switch or control system. No special operating procedures are required for the bulb itself.

Activación instantánea: The bulb provides instant illumination upon activation.
Alta eficiencia: Designed for high efficiency, providing optimal light output for its wattage.

Mantemento

Limpeza: If the bulb's glass surface becomes dirty, ensure the power is off and the bulb is cool. Gently wipe with a clean, dry, lint-free cloth. Do not use liquid cleaners.
Inspección: Periodically inspect the bulb for any signs of damage or wear. If the bulb appears damaged, replace it immediately.
Substitución: The bulb has an estimated operating life of 50 hours. Replace the bulb when it reaches the end of its life or if its performance degrades.

Lado view of the replacement bulb, showing the glass material

Imaxe 4: Lateral view of the replacement bulb, showcasing its glass construction and tubular shape.

Resolución de problemas

Problema	Causa posible	Solución
A lámpada non se acende.	Non hai potencia para o dispositivo. Lámpada mal asentada. A lámpada está defectuosa ou chegou ao final da súa vida útil. Problema de fixación.	Comprobe a fonte de alimentación e o disxuntor. Asegúrese de que os pines da lámpada estean completamente inseridos no portalámpadas. Substitúe a lámpada por unha nova. Consult the fixture's manual or a qualified technician.
O bulbo parpadea.	Conexión solta. Voltage flutuacións. Lámpada a piques de chegar ao final da súa vida útil.	Asegúrese de que a lámpada estea ben asentada. Comprobar a estabilidade da subministración de enerxía. Substitúe a lámpada.
A lámpada queima rapidamente.	Sobrevoltage. Frequent switching. Vibración excesiva. Oils/residue on glass.	Verificar o volume do aparellotage matches bulb (22V). Minimize frequent on/off cycles. Ensure fixture is stable. Handle bulb with a clean cloth or gloves during installation.

Especificacións

Marca:	Precisión técnica
Nome do modelo:	IKOLUX AJ24
Tipo de luz:	Halóxeno
Wattage:	150 vatios
Voltage:	22 voltios
Base da lámpada:	GY6.35
Tamaño da forma da lámpada:	T4 (Tubular)
Temperatura de cor:	3300 Kelvin
Vida operativa:	50 horas
Material:	Vidro
Características especiais:	Alta eficiencia, acendido instantáneo

Información da garantía

Este produto vén cun 1 anos de garantía do fabricante. For warranty claims or details, please contact Technical Precision directly. The warranty covers defects in materials and workmanship under normal use.

Apoio

For further assistance, technical support, or inquiries regarding the Technical Precision Replacement for ZEISS IKOLUX AJ24 Light Bulb, please visit the official Technical Precision store or contact their customer service.

Tenda de precisión técnica: Visita a tenda en Amazon

Technical Precision IKOLUX AJ24