Mount-It! MI-7940 Rolling Standing Desk Instruction Manual

Introdución

The Mount-It! MI-7940 Rolling Standing Desk provides a flexible and mobile workspace solution. Designed for various environments such as offices, classrooms, and home study areas, this desk allows for effortless transitions between sitting and standing positions, promoting improved posture and reduced fatigue. Its multi-platform design offers ample space for essential equipment and supplies.

Figure 1: Mount-It! MI-7940 Rolling Standing Desk

Información de seguridade

• This product has a maximum total weight capacity of 132 libras, with each individual shelf supporting up to 33 libras. Do not exceed these limits to prevent damage or injury.
• Ensure the desk is stable before use, especially when adjusting height or moving it.
• Always engage the locking casters to secure the desk in place when stationary.
• Exercise caution to avoid pinching fingers or other body parts during height adjustments.
• Do not attempt to move the desk with heavy items on it, as this may compromise stability and cause damage.

Instrucións de montaxe

Follow these steps carefully to assemble your Mount-It! MI-7940 Rolling Standing Desk. An assembly video is provided for visual guidance.

1. Attach Casters to the Base: Turn the base frame upside down. Attach the locking casters to the front end of the base (the side with the wider gap for feet when standing). Attach the regular casters to the rear. Use the provided wrench to tighten the nuts closest to the wheel to secure them. The other nut is for height adjustment.
2. Install Vertical Support Bars: Insert the vertical support bars into the base. Ensure the arms with the adjustment knobs are facing inwards, towards the center of the desk. Secure them from the bottom using the provided screws.
3. Fixar a barra transversal: Connect the crossbar between the two vertical support bars. This piece forms the base for the lower shelves. Secure it with screws.
4. Instalar o estante inferior: Place the bottom shelf onto the designated supports on the base. This shelf has screw openings closer to the edge of the wood, aligning with the long leg part on the bottom. Secure with screws.
5. Instalar a balda do medio: Position the middle shelf onto the supports above the crossbar. This shelf is designed to fit in one orientation. Secure with screws.
6. Instalar o estante superior: Place the top shelf onto the upper supports. This shelf also has specific cut-out holes to sit flat over the screws used for the upper arms. Secure with screws.

Figura 2: Diagrama das características do produto

Instrucións de funcionamento

Axuste de altura

The top shelves of the MI-7940 desk are adjustable through 11 locking intervals, allowing you to switch between sitting and standing positions. The height can be adjusted from 37.25 polgadas a 54.7 polgadas.

1. Aumentar: Loosen the adjustment knobs on both vertical support bars. With hands on both sides of the top platform, lift the platform upwards. You will hear a click at each locking interval. Once the desired height is reached, tighten both adjustment knobs securely.
2. Para baixar: Loosen the adjustment knobs on both vertical support bars. Lift the platform all the way up until it reaches the maximum height (indicated by a 'MAX' line). Lift it slightly further (about an inch) until the internal locks release. Slowly guide the platform downwards to your desired height. Once the desired height is reached, tighten both adjustment knobs securely.

Figure 3: Height Adjustment Range

Mobilidade

The desk is equipped with 1.5-inch smooth-rolling casters for easy movement across various surfaces. Two of these casters include brakes for securing the desk in a stationary position.

• Para mover: Ensure the two locking casters (located at the front of the base) are disengaged. Gently push or pull the desk to its desired location.
• Para asegurar: Once the desk is in position, press down on the levers of the two locking casters until they click into place. This will prevent the desk from rolling.

Figure 4: Caster Wheels with Locking Mechanism

Mantemento

• Limpeza: Limpe as superficies cun suave, damp pano. Evite produtos químicos agresivos que poidan danar o acabado.
• Fixadores: Comprobe periodicamente todos os parafusos e bulóns para asegurarse de que estean ben axustados. Volva apertalos se é necesario para manter a estabilidade.
• Rodízios: Manteña as rodas libres de residuos para garantir un rodamento suave.

Resolución de problemas

• Desk is unstable/wobbly: Ensure all assembly screws are securely tightened. Verify that the adjustment knobs for height are fully tightened after setting the desired height. Adjust the leveling nuts on the casters if the floor is uneven.
• Dificultade para axustar a altura: Ensure both adjustment knobs are sufficiently loosened before attempting to raise or lower the platform. If lowering, remember to lift the platform to its maximum height first to release the internal locks.
• As rodas non xiran con suavidade: Check for any hair or debris caught in the caster wheels. Clean as necessary. Ensure locking casters are disengaged.

Especificacións

Figura 5: Dimensións do escritorio

Figure 6: Weight Capacity

Garantía e Soporte

The Mount-It! MI-7940 Rolling Standing Desk is covered by Mount-It!'s garantía de por vida, ensuring lasting confidence in your purchase.

For any technical assistance, questions, or support before, during, or after setup, our expert US-based technical team is ready to assist you. Please refer to the contact information provided with your product packaging or visit the official Mount-It! websitio para obter detalles de asistencia.