Introdución
Thank you for choosing the Ryobi P727 One+ 18 Volt 950 Lumen LED Work Light. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new work light. Please read these instructions carefully before use and retain them for future reference.
Información importante de seguridade
Always observe basic safety precautions when using electrical tools and equipment to reduce the risk of fire, electric shock, and personal injury.
- Le todas as instrucións: Familiarize yourself with the controls and proper use of the work light.
- Use appropriate battery: This work light is designed for use with Ryobi 18V One+ batteries (sold separately). Do not attempt to use other battery types.
- Avoid direct eye exposure: Non mires directamente á luz LED.
- Non operar en atmosferas explosivas: Do not use the light in the presence of flammable liquids, gases, or dust.
- Manter aos nenos lonxe: Este produto non é un xoguete. Mantéñase fóra do alcance dos nenos.
- Almacenar correctamente: When not in use, store the light in a dry, secure place away from moisture and extreme temperatures.
Contido do paquete
Comprobe que todos os elementos estean presentes ao desembalar:
- Ryobi P727 One+ 18 Volt 950 Lumen LED Work Light (Light Only)
Nota: Ryobi 18V One+ batteries and chargers are sold separately.
Configuración
Instalación de baterías
- Asegúrate de que a luz de traballo estea apagada.
- Align the ribs on the battery with the grooves in the work light's battery port.
- Deslice a batería no porto ata que encaixe firmemente no seu lugar.
- To remove the battery, press the latch on the battery pack and slide it out.
The Ryobi P727 is compatible with all Ryobi 18V One+ batteries, including models such as P100, P101, P102, P103, P104, P105, P107, and P108.
Instrucións de funcionamento
Turning On/Off and Adjusting Light Output
The work light features two LED banks for versatile illumination. A power button controls the light output.
- Press the power button once to illuminate one LED bank.
- Press the power button a second time to illuminate both LED banks for maximum brightness (950 lumens).
- Press the power button a third time to turn the light off.
Axuste da cabeza de luz
The light head can rotate up to 270 degrees, allowing you to direct light precisely where needed. Gently pivot the light panels around the central axis to achieve the desired angle.
Image: The Ryobi P727 work light shown with its head angled upwards, demonstrating its rotational capability.
Image: The Ryobi P727 work light standing upright with its head fully extended vertically.
Using Hanging Options
The work light includes multiple integrated hanging options for convenience:
- Pull-out Hook: Located at the top of the light, this hook can be extended to hang the light from pipes, wires, or other suitable structures.
- Nail Pegs: Integrated slots allow the light to be mounted on nails or screws.
- Hanging Brackets: Additional brackets provide further mounting flexibility.
Image: A man positioned under a car, using the Ryobi P727 work light to illuminate the underside of the vehicle, demonstrating its utility in tight spaces.
Image: A man wearing safety glasses, leaning over a car engine, with the Ryobi P727 work light illuminating the engine bay from above.
Image: A man working on an electrical panel in a dimly lit room, with the Ryobi P727 work light providing bright illumination to the work area.
Duración da batería
When using a 4AH Ryobi 18V One+ battery, the work light can provide illumination for up to 9 hours.
Mantemento
Limpeza
- Retire sempre a batería antes da limpeza.
- Use un limpo, damp un pano para limpar o exterior da luz de traballo. Non empregue produtos químicos agresivos nin produtos de limpeza abrasivos.
- Keep the LED lenses clean for optimal light output.
Almacenamento
- Store the work light in a dry, cool place, away from direct sunlight and moisture.
- Remove the battery from the light if storing for extended periods.
Resolución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| A luz non acende. | Batería non instalada correctamente ou descargada. | Asegúrate de que a batería estea completamente colocada. Carga ou substitúe a batería. |
| A luz é débil. | A carga da batería é baixa. | Cargue ou cambie a batería. |
| Light head does not rotate smoothly. | Debris or obstruction in the pivot mechanism. | Inspect and clear any obstructions. Do not force rotation. |
Especificacións
| Característica | Detalle |
|---|---|
| Número de modelo | P727 |
| Voltage | 18 Volt (Ryobi One+ System) |
| Saída de luz | Ata 950 Lumens |
| Rotación | 270 graos |
| Tipo de fonte de luz | LED |
| Material | Aceiro de aliaxe |
| Cor | Verde |
| Approximate Dimensions (Folded) | 16.25 cm de alto x 6 cm de ancho x 3.88 cm de fondo |
Image: The Ryobi P727 work light shown with its approximate dimensions: 16.25 inches height, 6 inches width, and 3.88 inches depth.
Garantía e Soporte
For warranty information, service, or technical support, please refer to the warranty card included with your product or visit the official Ryobi websitio. Garde o recibo da compra como xustificante de compra para reclamacións de garantía.
Websitio: www.ryobitools.com