KOKKO FLP2 Mini SOS Looper Pedal

1. Introdución

Grazas pola compraasing the KOKKO FLP2 Mini SOS Looper Pedal. This compact and versatile guitar effect pedal is designed to provide musicians with an easy-to-use looping solution. It allows for recording, overdubbing, and playback of guitar phrases, enhancing practice sessions and live performances. Please read this manual carefully to ensure proper operation and to get the most out of your new looper pedal.

2. Características do produto

• Maximum loop time of 5 minutes.
• Seamless overdubbing capability over existing riffs.
• Undo and redo functions for the last recorded riff.
• LED indicator for clear status display (recording, playback, idle).
• True bypass functionality when no loop is active.

3. Controis e Indicadores

Figura 1: Fronte view of the KOKKO FLP2 Looper Pedal with labeled components.

• LOOP LEVEL Knob: Controls the playback volume of the recorded loop.
• Saída de 6.35 mm: Standard 1/4-inch audio output jack to connect to an amplifier ou outros efectos.
• Indicador LED: Displays the current status of the looper pedal.
• Entrada de 6.35 mm: Standard 1/4-inch audio input jack for your guitar or other instrument.
• Interruptor de pé: Multi-functional switch for recording, playback, overdubbing, undo/redo, and clearing loops.
• Power In (9V DC/300mA with center negative): Power input jack for connecting an external 9V DC power adapter.

4. Configuración

1. Conexión de alimentación: Connect a 9V DC power adapter (center negative, minimum 300mA, not included) to the 'Power In' jack on the pedal. Ensure the power adapter meets these specifications to prevent damage.
2. Conexión do instrumento: Connect your guitar or instrument to the '6.35mm Input' jack using a standard 1/4-inch instrument cable.
3. Conexión de saída: Connect the '6.35mm Output' jack to your amplifier or the input of another effects pedal using a standard 1/4-inch instrument cable.
4. Axuste de volume: Set the 'LOOP LEVEL' knob to a low position initially and adjust it as needed during operation.

Figura 2: Traseira view of the KOKKO FLP2 Looper Pedal, highlighting the power input specifications.

5. Instrucións de funcionamento

The KOKKO FLP2 Looper Pedal operates using a single multi-functional footswitch and an LED indicator. The LED changes color to indicate different modes:

• LED verde: Modo de reprodución.
• LED vermello: Recording or Overdubbing mode.
• LED apagado: True Bypass mode (no loop active).

5.1. Recording a Loop

1. Ensure the LED is off (True Bypass mode).
2. Single press the footswitch to start recording. The LED will turn RED.
3. Play your desired phrase.
4. Single press the footswitch again to stop recording and start playback. The LED will turn GREEN.

5.2. Overdubbing

1. While a loop is playing (GREEN LED), single press the footswitch to enter overdub mode. The LED will turn RED.
2. Play your new phrase over the existing loop.
3. Single press the footswitch again to stop overdubbing and continue playback with the new layer. The LED will turn GREEN.
4. You can overdub multiple layers infinitely, up to the maximum loop time of 5 minutes.

5.3. Undo/Redo Last Riff

• Desfacer: During playback (GREEN LED), press and hold the footswitch for longer than 1.5 seconds to undo the last recorded riff. The LED will flash GREEN briefly.
• Refacer: After undoing a riff, press and hold the footswitch again for longer than 1.5 seconds to redo the previously undone riff. The LED will flash GREEN briefly.

5.4. Deter a reprodución

During playback (GREEN LED), double press the footswitch quickly to stop the loop. The LED will turn GREEN and then turn off, indicating the loop is stopped but still stored in memory.

5.5. Clearing the Loop

1. To clear the stored loop, ensure the loop is stopped (LED off).
2. Press and hold the footswitch for longer than 1.5 seconds. The LED will flash RED briefly, indicating the loop has been cleared.
3. The pedal is now in True Bypass mode, ready to record a new loop.

6. Especificacións

Figure 3: KOKKO FLP2 Looper Pedal dimensions.

7. Mantemento

• Keep the pedal clean and dry. Avoid exposure to moisture or extreme temperatures.
• Use un pano suave e seco para a limpeza. Non use produtos de limpeza ou disolventes abrasivos.
• Ensure all cable connections are secure before use.
• Cando non o use durante períodos prolongados, desconecte o adaptador de corrente.

8 Solución de problemas

• Sen enerxía: Ensure the 9V DC power adapter is correctly connected and meets the specified requirements (center negative, minimum 300mA). The pedal does not operate on batteries.
• Sen son: Check all instrument cable connections. Ensure the 'LOOP LEVEL' knob is not set to minimum. Verify your ampO transformador e o instrumento funcionan correctamente.
• Loop Not Recording/Playing: Ensure the pedal is in the correct mode (RED LED for recording, GREEN LED for playback). If the LED is off, single press the footswitch to start recording.
• Ruído non desexado: Check for faulty cables or interference from other electronic devices. Ensure your power supply is regulated.

9. Información da garantía

This KOKKO FLP2 Mini SOS Looper Pedal comes with a one-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers manufacturing defects but does not cover damage caused by misuse, unauthorized modifications, or improper power supply.

10. Contacto e asistencia

For further assistance or technical support, please visit the official KOKKO websitio ou póñase en contacto co seu distribuidor local.