Introdución
This manual provides essential information for the safe and effective use of your BEPER 50.700 Handheld Steam Cleaner. Please read these instructions carefully before operating the appliance and retain them for future reference. The BEPER 50.700 is designed for sanitizing and disinfecting various surfaces in your home using high-temperature steam.
Instrucións de seguridade importantes
Cando se utilicen aparellos eléctricos, deben seguirse sempre as precaucións básicas de seguridade para reducir o risco de incendios, descargas eléctricas e danos persoais.
- Asegúrese sempre de que o aparello estea desconectado antes de encher ou baleirar o depósito de auga.
- Do not direct steam at people, animals, or electrical appliances. Steam is very hot and can cause burns.
- The steam temperature can reach up to 135°C. Exercise extreme caution.
- This appliance features a double safety power button to prevent accidental activation, especially by children.
- Keep the appliance out of reach of children and supervise them when the appliance is in use.
- Non mergullo o aparello en auga ou en calquera outro líquido.
- Emprega só auga limpa da billa. Non engadas deterxentes, perfumes nin outros produtos químicos ao depósito de auga.
- Inspeccione regularmente o cable de alimentación para detectar danos. Non o faga funcionar se o cable está danado.
- Ensure the steam nozzle is clear before use.
Compoñentes do produto
Your BEPER 50.700 Steam Cleaner comes with a variety of accessories designed for different cleaning tasks:
- Unidade principal: Handheld steam cleaner with ergonomic handle and safety button.
- Pincel redondo: For scrubbing stubborn dirt on various surfaces.
- Angle Nozzle: For reaching tight corners and difficult areas.
- Long Spray Nozzle: For focused steam application.
- Glass and Window Nozzle: For streak-free cleaning of glass surfaces.
- Tecido de tecido: For use with the glass/window nozzle or other attachments for delicate surfaces.
- Manguera de extensión flexible: For extended reach and flexibility during cleaning.
- Embudo: For easy and safe water filling.
- Copa medidora: Para unha medición precisa da auga.
Imaxe: Máis deview of the various accessories included with the BEPER 50.700 Steam Cleaner, such as brushes, nozzles, and extension hose.
Configuración
- Desempaquetar: Retire coidadosamente todos os compoñentes da embalaxe.
- Encher o depósito de auga: Ensure the appliance is unplugged. Unscrew the safety cap. Use the provided measuring cup and funnel to fill the aluminum boiler with up to 350 ml of clean tap water. Do not overfill.
- Tapa segura: Screw the safety cap back on tightly.
- Accesorio: Select the appropriate accessory for your cleaning task and firmly attach it to the steam outlet.
- Conexión de alimentación: Plug the power cord into a suitable electrical outlet. The working light will illuminate.
Image: Demonstrates the process of filling the steam cleaner's water tank with water using the provided accessories.
Instrucións de funcionamento
- Calefacción: After plugging in, the appliance will begin heating the water. This process takes approximately 3 minutes. The working light indicates the heating status.
- Listo para Steam: Once the water is heated, the steam cleaner is ready for use.
- Activar Steam: Press and hold the steam button, which features a double safety mechanism, to release steam. For continuous steam, there is a lock feature on the button.
- Limpeza de superficies:
- For floors, use the appropriate nozzle and cloth.
- For upholstery and carpets, use the fabric cloth attachment.
- For windows and glass, use the glass and window nozzle for best results.
- For hard-to-reach areas or stubborn dirt, utilize the angle nozzle or round brush.
- Duración: A full 350 ml tank provides approximately 15 minutes of continuous steam.
- Recarga: If the steam output decreases or stops, unplug the unit and allow it to cool down completely before refilling the water tank. Never attempt to open the cap while the unit is pressurized or hot.
- Acabado: After cleaning, release any remaining steam, unplug the appliance, and allow it to cool before storing.
Image: Key features and operational indicators of the BEPER 50.700 Steam Cleaner, including its quick heating and safety button.
Image: Shows the steam cleaner in action on different surfaces like a kitchen sink, window, and carpet, demonstrating its versatility.
Image: A visual representation of the cleaning effectiveness, showing a stovetop before and after using the steam cleaner.
Mantemento e Limpeza
Proper maintenance ensures the longevity and optimal performance of your steam cleaner.
- Enfriamento: Always ensure the appliance is unplugged and completely cooled before cleaning or storing.
- Auga baleira: After each use, carefully empty any remaining water from the tank.
- Exterior limpo: Limpe o exterior da unidade cun suave, damp pano. Non use produtos de limpeza ou disolventes abrasivos.
- Accesorios limpos: Rinse accessories with water and allow them to air dry. Remove any debris from brushes or nozzles.
- Descalcificación (periodicamente): Depending on water hardness, mineral deposits may build up in the boiler. To descale, fill the tank with a solution of equal parts water and white vinegar. Heat the unit for a few minutes (do not allow it to steam fully), then unplug and let it sit for several hours or overnight. Empty the solution and rinse thoroughly with fresh water several times before normal use.
- Almacenamento: Store the steam cleaner and its accessories in a cool, dry place, out of reach of children.
Resolución de problemas
Antes de contactar co servizo de atención ao cliente, consulte a seguinte guía de resolución de problemas:
| Problema | Causa posible | Solución |
|---|---|---|
| Sen vapor ou pouca saída de vapor. | Water tank is empty or low. Unit not heated sufficiently. Nozzle is blocked. | Unplug, allow to cool, then refill water tank. Wait 3 minutes for heating. Clean the nozzle. |
| Fuga de auga pola boquilla. | Unit not fully heated. Condensation. | Allow the unit to heat for the full 3 minutes. This is normal at the start of operation. |
| A luz de encendido non está acendida. | Aparello non conectado. Avaría na toma de corrente. | Asegúrate de que o cable de alimentación estea conectado correctamente a unha toma de corrente que funcione. Comproba o disyuntor. |
Especificacións
- Número de modelo: 50.700
- Potencia: 1050 vatios
- Capacidade do depósito de auga: 350 mililitros
- Presión de vapor: 3.2 bar
- Saída de vapor: 30 g/min
- Lonxitude do cable: 3 metros
- Temperatura máxima: 135°C
- Tempo de calefacción: Aproximadamente 3 minutos
- Operating Time (Full Tank): Aproximadamente 15 minutos
- Dimensións do produto (L x W x H): 14.5 x 25.5 x 23.5 cm
- Peso do artigo: 1.18 quilogramos
- Fonte de enerxía: Eléctrico con cable
- Voltage: 240 voltios
- Cor: Amarelo/Negro
Image: Visual representation of the steam cleaner highlighting its main technical specifications.
Garantía e Soporte
For warranty information, product support, or to inquire about spare parts, please refer to the documentation provided with your purchase or contact BEPER customer service. Keep your proof of purchase for warranty claims.
Fabricante: Beper
Date of first availability on Amazon.com.be: 2 de outubro de 2022