Introdución
The Rotronic Hygropalm 21 is a portable thermo hygrometer designed for accurate measurement of temperature and relative humidity. This device is suitable for various applications requiring precise environmental monitoring. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your Hygropalm 21.
Figura 1: The Rotronic Hygropalm 21 Thermo Hygrometer, displaying current temperature and humidity values on its screen.
Configuración
1. Instalación da batería
The Hygropalm 21 is powered by a 9-volt battery.
- Localiza a tapa do compartimento da batería na parte traseira do dispositivo.
- Deslice ou solte a tapa con coidado para abrir o compartimento.
- Insert a new 9-volt battery, ensuring correct polarity (+ e - terminais).
- Volva colocar a tapa do compartimento da batería, asegurándose de que estea ben pechada.
2. Acendido inicial
After battery installation, press and hold the Poder button (red button with circle and vertical line) located on the front panel to turn on the device. The display will illuminate and show current temperature and humidity readings.
Figura 2: Primeiro plano view of the control buttons on the Hygropalm 21, including Power, Menu, Up, Down, and Enter.
Instrucións de funcionamento
1. Medición básica
Upon power-on, the Hygropalm 21 automatically begins measuring and displaying relative humidity (rH) and temperature (°C or °F). The integrated sensor probe extends from the top of the device. Ensure the sensor is exposed to the environment you wish to measure.
2. Funcións dos botóns
- Power Button (red): Press and hold to turn the device ON or OFF.
- Botón MENÚ: Accesses the device's menu for configuration settings.
- Botón de frecha cara arriba: Navigates upwards through menu options or increases values.
- Botón de frecha cara abaixo: Navigates downwards through menu options or decreases values.
- Botón ENTER: Confirma seleccións ou accede a submenús.
3. Interpretación da pantalla
The LCD screen typically shows two main readings:
- Upper Value: Relative Humidity (e.g., 32.4 %rH).
- Lower Value: Temperature (e.g., 23.1 °C).
Additional indicators may appear for battery status, measurement units, or menu navigation.
Figura 3: The Hygropalm 21 positioned in its tabletop stand, ready for continuous monitoring.
Mantemento
1. Limpeza
- Limpar o dispositivo casing cun suave, damp pano. Non use produtos de limpeza ou disolventes abrasivos.
- Keep the sensor probe clean and free from dust or debris. Avoid touching the sensor element directly.
2. Calibración
Regular calibration is crucial for maintaining the accuracy of your Hygropalm 21. The device is supplied with a calibration certificate. Refer to the device's menu for calibration options or consult the Rotronic website for detailed calibration procedures and recommended intervals.
3. Almacenamento
When not in use for extended periods, remove the battery to prevent leakage. Store the device in a clean, dry environment within its specified operating temperature range.
Resolución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| O dispositivo non se acende. | Batería descargada ou instalada incorrectamente. | Check battery polarity, replace with a new 9V battery. |
| Lecturas inexactas. | Sensor dirty or device requires calibration. | Clean the sensor carefully. Perform a calibration as per instructions. |
| A pantalla está en branco ou parpadea. | Batería baixa ou fallo interno. | Replace battery. If problem persists, contact support. |
Especificacións
- Modelo: Hygropalm 21
- Número de peza: EM-08NY-P68I
- Marca: Rotronic
- Fonte de enerxía: Alimentado por batería (9 voltios)
- Peso do artigo: 470 g
- Tipo de montaxe: Mesa
- Clasificación de temperatura superior: 60 graos Celsius (140 °F)
- Compoñentes incluídos: 1 Unit of Thermohygrometer, Instruction Manual, Calibration certificate
Garantía e Soporte
For warranty information and technical support, please refer to the documentation included with your product or visit the official Rotronic websitio.
Contacto do fabricante: Rotronic
Lugar de traballo: #18, Street 1A, Czech Colony, Sanath Nagar, Hyderabad, Telangana, India - 500018.
Número de contacto: 8142350506